1. Introduction
The Lao Chen KT88-K1 is a Class A pure tube amplifier designed for high-fidelity audio reproduction. First launched in 2007, this model has undergone over a decade of refinement, offering a mature and stable performance. It is characterized by its bright mid-pitch and high-pitch permeability, with significant improvements in low-frequency strength and thrust.
The amplifier features traditional manual shed wiring and welding, ensuring clean lines and minimizing noise. Its circuit design incorporates classic advantages from both domestic and international audio engineering. Key components include a 5U4G row filament liner rectifier, CLC inductor filter, and 6H8C tubes promoting KT88 power tubes. The power transformer utilizes new imported 0.35 films (105*60), and the output transformer uses new imported Z11 films (86*50).
The KT88-K1 delivers 15W of undistorted output power per channel, capable of driving a variety of bookshelf or floor-standing speakers. Internal wiring uses Teflon silver jacketed wire. High-quality components such as imported fever capacitors, fancier-grade resistors, and ALPS potentiometers are used throughout.
The robust chassis is constructed from 1.5mm thick steel plate with electrostatic spraying, complemented by an 8mm oxidized brushed aluminum front panel and solid frosted aluminum knobs. It offers two input channels and two sets of pure copper crystal binding posts for 4Ω and 8Ω speaker outputs.

2. Setup Guide
2.1 Unpacking and Inspection
Carefully remove the amplifier from its packaging. Inspect the unit for any signs of damage during transit. The package weight is approximately 20kg (19.5kg after thickened double-layer packaging).
2.2 Tube Installation (if not pre-installed)
The amplifier uses five electron tubes: two KT88 power tubes, two 6SN7GT front-level magnifying tubes, and one 5U4G rectifier tube. Ensure each tube is gently inserted into its corresponding socket, aligning the pins correctly. Do not force the tubes. The tubes are typically numbered or marked for correct placement.

2.3 Connecting Speakers
Connect your speakers to the pure copper crystal binding posts on the rear panel. The amplifier provides output options for both 4Ω and 8Ω speakers. Ensure correct polarity (+ to + and - to -) for each speaker. Use high-quality speaker cables for optimal performance.
2.4 Connecting Audio Sources
The amplifier features two input channels: 'CD' and 'DAC'. Connect your audio sources (e.g., CD player, DAC, streamer) to the corresponding RCA input jacks on the rear panel.

2.5 Power Connection
Connect the power cable to the amplifier's power inlet and then to a suitable wall outlet. The amplifier is available in 110V and 220V versions. Ensure the amplifier's voltage matches your local power supply. The default input voltage is 220V. If you require 110V or 240V, please ensure you have the correct version or contact customer service for guidance.
3. Operating Instructions
3.1 Powering On/Off
Press the 'POWER' button on the front panel to turn the amplifier on. The tubes will gradually warm up, and the meters will activate. Press the button again to turn off the amplifier.
3.2 Input Selection
Use the 'INPUT' knob on the front panel to select your desired audio source: 'DAC', 'CD', or 'MUTE'.
3.3 Volume Control
Adjust the 'VOLUME' knob to control the output level. Start with a low volume and gradually increase it to a comfortable listening level.
3.4 Bluetooth Operation (if applicable)
If you have the Bluetooth version, the amplifier is equipped with an upgraded Bluetooth 5.0 module supporting AAC, aptX, aptX LL, and aptX HD codecs. To connect via Bluetooth:
- Select the 'Bluetooth' input (if available on your model, otherwise it might be integrated with one of the existing inputs or auto-detect).
- Enable Bluetooth on your source device (e.g., smartphone, tablet).
- Search for available devices and select 'KT88-K1' (or similar name) to pair.
- Once paired, audio will stream wirelessly to the amplifier.
4. Maintenance
4.1 General Cleaning
To clean the amplifier, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or components. Ensure the amplifier is powered off and unplugged before cleaning.
4.2 Tube Care and Replacement
Electron tubes have a finite lifespan. While the tubes provided are of high quality, they may eventually need replacement. The manufacturer offers free replacement of tubes within one year of use if problems arise. When replacing tubes, ensure the amplifier is powered off and cooled down. Handle tubes carefully by their base to avoid damaging the glass or pins. Refer to the tube installation section for proper alignment.
4.3 Internal Components
The amplifier features pure manual shed welding and clean internal wiring, which is designed to be convenient for future maintenance or upgrades by experienced technicians. However, unauthorized opening of the chassis may void your warranty and poses a risk of electric shock. For any internal issues, it is recommended to seek professional service.

5. Troubleshooting
5.1 No Power
- Check if the power cable is securely connected to both the amplifier and the wall outlet.
- Ensure the wall outlet is functioning correctly.
- Verify that the amplifier's voltage setting (110V or 220V) matches your local power supply.
5.2 No Sound Output
- Confirm that the amplifier is powered on and the tubes are glowing.
- Check all audio source connections (CD, DAC) and ensure they are secure.
- Verify that the correct input source is selected using the 'INPUT' knob.
- Ensure the 'VOLUME' knob is not set to minimum or 'MUTE' is not selected.
- Check speaker cable connections for correct polarity and secure fit.
- If using Bluetooth, ensure the device is properly paired and connected.
5.3 Distorted Sound or Hum
- Check all cable connections for looseness or damage.
- Ensure proper grounding of the amplifier and source components.
- Try moving the amplifier away from other electronic devices that might cause interference.
- If the distortion persists, a tube may be faulty or nearing the end of its lifespan. Contact support for assistance.
5.4 Voltage Compatibility
The amplifier is designed for specific voltage inputs (110V or 220V). If your local voltage is 236V (e.g., in Thailand), the 220V version of the amplifier should generally be compatible, as most 220V equipment can tolerate a small variance. However, for optimal performance and longevity, it is always recommended to use the exact specified voltage or consult with the manufacturer if your voltage significantly deviates (e.g., 240V). The default input voltage is 220V. If you need 240V or 110V, please ensure you have the correct version or contact customer service for remarks during purchase.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BRZHIFI |
| Model | KT88-K1 |
| Channels | 2 (2.0) |
| Rated Output Power | 15W × 2 |
| Maximum Power Per Channel | 15 W |
| Frequency Response | 20Hz-25kHz |
| Total Harmonic Distortion | < 1% (1kHz) |
| Input Sensitivity | 500mV - 2000mV |
| Input Impedance | 100 Kohm |
| Output Impedance | 4Ω, 8Ω |
| Signal-to-Noise Ratio | 88dB |
| Dimensions (W × D × H) | 370 × 240 × 180mm |
| Net Weight | 16kg |
| Package Weight | 20kg |
| Post-level Power Tubes | Noble voice KT88 × 2 |
| Rectifier Tube | Noble voice 5U4G |
| Front-level Magnifying Tubes | 6SN7GT × 2 |
| Chassis Material | 1.5mm thick steel plate, 8mm oxidized brushed aluminum panel |
| Bluetooth (optional) | Bluetooth 5.0 (supports AAC, aptX, aptX LL, aptX HD) |
| Certification | CE |
7. User Tips
- Voltage Check: Always confirm the amplifier's voltage (110V or 220V) matches your local power supply before plugging it in. If your region uses 240V, the 220V version is generally compatible, but for specific requirements, verify with the seller.
- Bluetooth Version: If you intend to use Bluetooth, ensure you select the 'K1 Bluetooth version' during purchase, as it comes with an upgraded Bluetooth 5.0 module supporting advanced audio codecs.
- Tube Warm-up: Allow a few minutes for the tubes to warm up after powering on for optimal sound quality.
- Speaker Matching: While the 15W output is robust, ensure your speakers are appropriately matched in terms of impedance (4Ω or 8Ω) and sensitivity for the best audio experience.
8. Warranty and Support
8.1 Tube Warranty
All electronic tubes supplied with the amplifier are upgraded nobleman's voice bile duct series. They are sourced from the latest production batch and will be replaced free of charge if any problems occur within one year of use.
8.2 General Support
For any other issues, technical assistance, or inquiries regarding your Lao Chen KT88-K1 amplifier, please contact the seller or manufacturer directly. Provide your purchase details and a clear description of the issue to facilitate prompt support.