1. Introduction
The Renolink V2.11 is an advanced OBD2 ECU programmer designed for a wide range of diagnostic and programming tasks on Renault and Dacia vehicles. This device facilitates various functions including UCH matching, airbag programming, engine ECU programming, key coding, key deletion, dashboard coding, and EEPROM/flash reading and writing. It allows users to perform complex operations easily and manage vehicle memory without the need to disassemble ECUs, EPROMs, or flash drives. The Renolink V2.11 enables the virginization and reprogramming of components such as UCH, motor brackets, indicators, airbag modules, and fuse tables, whether they are new or used parts.
Video: Overview of Renolink V2.11 features and usage.
2. Setup Guide
Follow these steps to set up your Renolink V2.11 ECU Programmer:
- Software Acquisition: Access the necessary software drivers and applications. These are typically provided on a software CD included with your purchase or can be downloaded from an online storage link provided by the seller.
- Driver and Application Installation: Install the downloaded drivers and applications on your computer. The software supports Windows 10 and Windows 11 operating systems.
- Connect to Vehicle: Connect the Renolink V2.11 adapter to your vehicle's OBD2 socket and then connect the USB cable to your computer.
- Ignition On: Turn on the car's ignition switch.

Figure 1: 4 Easy Steps to Use the Renolink V2.11

Figure 2: Renolink V2.11 package contents including the device and software CD.
3. Operating Instructions
The Renolink V2.11 offers a comprehensive set of functions for Renault and Dacia vehicles. Ensure your vehicle's ignition is on and the device is properly connected before performing any operations.
3.1. Core Functions
- Eprom Read / Write
- ECU Resetting
- Clear Crash Airbag
- Airbag Reset
- Airbag Virginize
- KEY Programming
- TDB (Cluster) Programming
- Indicator Programming
- ECM Programming
- UCH Programming
- EPS Virginizer
- EPS Resetting

Figure 3: Renolink V2.11 Functional Parts
3.2. Specific Implementations and Updates (V2.11)
- PIN Code Reading: Implemented for HFM Renault Clio 4 and Renault Captur 2016+. A valid card is required to teach HFM, as the procedure virginizes it.
- Card Programming: Added for Clio4 (2012-2015).
- Immo Code Deletion: For power steering (DAE) in Dacia Duster ph3. Encoding is automatic at the first ignition.
- ECU Learning: For DACIA Logan 2, Sandero, Lodgy, Docker, and Duster ph2, addressing known issues with ECM V42.
- Dashboard Read/Write (EEPROM & Flash): Supported for Dacia Logan2, Sandero2, Lodgy, Docker, and Duster ph2 dashboards from years 2013-2014 and 2014-2017.
- Dashboard Read/Write (Flash, EEPROM, KM): Added for Mégane 3 and Fluence 2015+ (VDO dashboards).
- Dashboard Read/Write (Flash, EEPROM, KM): Added for Laguna 3 dashboard.
- Dashboard Read/Write (KM, EEPROM, Flash): Supported for Renault Fluence dashboard.
- Key Programming UCH BMT Sagem: For Dacia Solenza, Supernova, Renault Twingo, Kangoo, and Master (years 1998-2003).
- KM Read/Write: For Renault Modus dashboard.
- KM Read/Write (KM, EEPROM): For Koleos dashboard.
3.3. Key Programming (KEY PROG)
- Dacia Logan 2
- Dacia Sandero 2
- Dacia Duster ph 2
- Dacia Lodgy
- Dacia Dokker
- Renault Clio Symbol 3
4. Maintenance
To ensure the longevity and optimal performance of your Renolink V2.11, follow these maintenance guidelines:
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Keep the OBD2 connector and USB port clean and free from dust or debris. Use a soft, dry cloth for cleaning.
- Cable Care: Avoid bending or kinking the cable excessively, as this can damage internal wires.
- Software Updates: While the device's 'Software Update' attribute is listed as 'no', the product has received database updates (e.g., December 2019, July 2019). Periodically check with the seller or official channels for any available software or database updates to ensure compatibility with newer vehicle models and improved functionality.
5. Troubleshooting
If you encounter issues with your Renolink V2.11, consider the following troubleshooting steps:
- Device Not Recognized: Ensure the USB cable is securely connected to both the device and your computer. Try a different USB port. Verify that the drivers are correctly installed.
- No Communication with Vehicle: Check that the OBD2 connector is firmly seated in the vehicle's port. Confirm the car's ignition is turned on. Ensure the vehicle model is supported by the Renolink V2.11 software.
- Software Issues: If the software is not functioning correctly, try reinstalling it. If the original software CD is damaged, contact the seller for a software download link.
- Product Malfunction: If the product does not work normally after following the setup and basic troubleshooting, it is crucial to contact the seller for assistance.

Figure 4: Important Warning regarding software and product issues.
6. Specifications
| Attribute | Detail |
|---|---|
| Model Name | Renolink V2.11 for Renault ECU Programmer |
| Software Version | renolink v2.11 |
| Hardware Version | Renolink 2.11 |
| Brand Name | OBDOK |
| Item Type | Other |
| Material | Plastic |
| Item Weight | 0.2kg |
| Origin | Mainland China |
| Software Language | English, French, Polish |
| Supported OS | Windows 10 / Windows 11 |
| Supported Car Makes | For Renault ECU Programmer (including Megane 4, Scenic 4, Kadjar, Talisman, Dacia models) |
| Wireless Support | No |
| Batteries Included | No |

Figure 5: Renolink V2.11 Coverage Area
7. User Tips
- Vehicle Compatibility: Always verify that your specific Renault or Dacia model and year are supported by the Renolink V2.11 software before attempting any programming. Refer to the detailed function list in Section 3.
- Software Download: If the included software CD is damaged or unreadable, immediately contact the seller to obtain a digital download link for the software.
- Contact Support First: Should you encounter any operational issues or if the product does not function as expected, contact the seller's support team directly for assistance. Avoid attempting unauthorized repairs or opening disputes prematurely, as the seller is committed to helping you resolve problems.
- Automatic Coding: For certain functions, such as the deletion of immo code from power steering (DAE) in Dacia Duster ph3, coding will occur automatically at the first ignition after the procedure.
8. Warranty and Support
For any product-related issues, technical support, or warranty claims, please contact the seller directly. The seller is committed to assisting you with any problems you may encounter with your Renolink V2.11 ECU Programmer.
A detailed user manual in PDF format may also be available for download. Please refer to the seller's product page or contact support for the link to the User Manual (PDF).