HWATEL Single Band Cellular Amplifier

Contents

HWATEL Single Band Cellular Amplifier User Manual

Model: Single Band Cellular Amplifier

Brand: HWATEL

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your HWATEL Single Band Cellular Amplifier. This device is designed to amplify mobile signals, improving coverage for 2G, 3G, 4G, and 5G networks within your desired area. Please read this manual carefully before installation to ensure optimal performance and safety.

HWATEL Universal Single Band Cellular Amplifier showing supported bands: 850, 900, 1800, 2100, 2600 MHz.
HWATEL Single Band Cellular Amplifier supporting multiple frequency bands.

2. Packing List

Please check the contents of your package to ensure all items are present:

  • Booster: 1 pcs
  • USB Power Adapter: 1 pcs (EU or US Plug)
  • Electronic User Manual (PDF reference available)
Image showing the signal booster, USB power adapter, and an icon for the electronic user manual.
Contents of the product package.

3. Specifications

FeatureDescription
BrandHWATEL
TypeModular Adapters
Frequency BandsSingle Band (selectable from: 700MHz B28 (4G 5G), 850MHz B5 (3G 4G), 900MHz B8 (2G 3G), 1800MHz B3 (4G LTE), 2100MHz B1 (3G 4G LTE), 2600MHz B7 (4.5G 5G LTE+))
Gain60~70dBi (DL); 55~60dBi (UL) (70+/-5 dB)
RF Power17~20dBm (Output Power: 20dBm)
Power AdapterUSB charge 5V 1A
CoverageUp to 1000 Sqf (up to 500 Square Meters)
FeaturesAutomatic Level Control (ALC), Intelligent LCD Display
Assembly RequiredYes
CertificationsCE, FCC, RoHS
Product Dimensions (approx.)140mm (Length) x 85mm (Width) x 20mm (Height)
Package Dimensions (approx.)35cm (Length) x 23cm (Width) x 19cm (Height)
Package Weight (approx.)0.5 kg
Diagram showing the dimensions of the signal booster: 140mm length, 85mm width.
Signal Booster dimensions.
Diagram showing the dimensions of the signal booster: 104mm length, 84mm width, 20mm height.
Detailed product dimensions.

4. Setup Instructions

Proper installation is crucial for the optimal performance of your signal booster. Follow these steps carefully.

4.1. Step 1: Find the Position with the Strongest Signal

Finding the strongest signal position for the outdoor antenna is the most important step. Use a mobile device to measure signal strength. This location is typically above the roofline, on the side of the structure facing the nearest cellular tower, and positioned as high as practical to ensure a clear line of sight. Optimal placement allows the antenna to effectively “see” the serving cell tower, minimizing obstructions and maximizing signal strength and stability.

Diagram showing a cell tower, outdoor antenna on a roof, booster inside, and indoor antenna, illustrating signal flow.
Signal flow from cell tower to indoor antenna via booster.

Measure Signal Strength:

  • For iPhone:
    1. Dial *3001#12345#* then press the call button.
    2. Choose All Metrics, then click Serving Cell Info.
    3. Check Band Info, RSRP, and SINR.
  • For Android:
    1. Download and install the APP "Network Cell Info Lite", "Cellular-Pro" or "Cellular-Z".
    2. Check Band, RSRP, and SINR.
Screenshots of iPhone and Android showing signal strength measurements (RSRP, SINR). Warning: Do not buy if signal is less than 2 bars/-105dB.
Measuring signal strength on iPhone and Android devices.

Important Note:

  • The coverage area is directly dependent on the strength of the incoming signal received by the outdoor antenna.
  • If the outdoor signal is less than 2 bars, the coverage area will be limited.
  • If the outdoor signal is less than 1 bar, the booster may not work effectively.
  • This small booster's gain is 60dB downlink and 55dB uplink. It is NOT suitable for signals lower than -105dB / 2 bars.

4.2. Step 2: Install the Outdoor Antenna

Mount the outdoor antenna at the location identified in Step 1. Ensure it is positioned above the roofline and at the highest practical elevation. Verify that the installation site provides a minimum clearance radius of 3 meters, free from physical obstructions and other radiating or transmitting elements that may cause interference.

Raising the outdoor antenna or aligning it directly toward the serving mobile signal tower should result in an increase in received signal strength (RSRP), ideally reaching its optimal maximum level.

Key Tip:

Adjust the direction of the outdoor antenna and continuously monitor the indoor signal with your cellphone to achieve optimal signal strength.

Diagrams illustrating correct and incorrect outdoor antenna placement, including facing the tower, avoiding blocking, and avoiding too low placement.
Outdoor antenna installation guidelines.

4.3. Step 3: Install the Indoor Antenna

The provided panel antenna(s) should be mounted facing the area where signal coverage is required. It is essential that they are not directed toward the outdoor antenna.

4.4. Step 4: Install the Signal Booster

When positioning the booster, select a location near a functional AC power outlet. Do not expose the signal repeater to excessive heat, direct sunlight, moisture, or sealed airtight enclosures.

  1. Connect the outdoor antenna cable to the port “Outside” or “BTS” and tighten the connection securely.
  2. Connect the cable from the indoor antenna to the port "Inside” or “MS” and tighten the connection securely.
  3. Connect the AC power adapter cord to the signal booster to power on the booster.

Important:

  • Adjust the direction of the outdoor antenna and keep monitoring the indoor signal with your cellphone to achieve optimal signal strength.
  • Adjust the indoor antenna and keep monitoring the indoor signal with your cellphone to ensure adequate coverage throughout all rooms.
Video demonstrating the installation process and showing signal strength improvement for 2G, 3G, and 4G networks after activating the booster.

5. Operation

Once the outdoor and indoor antennas are connected and the booster is powered on, the device will automatically begin to amplify the signal. The intelligent LCD display provides real-time status information.

5.1. Intelligent LCD Display

The LCD screen on the booster provides key operational information:

  • Source Signal Level: Indicates the strength of the signal received by the outdoor antenna.
  • Gain Status: Shows if the booster is actively amplifying the signal (e.g., GAIN: OK).
  • Power Supply: Confirms power input (e.g., +12V: OK, +5.0V: OK).
Diagram of the intelligent LCD display showing Source Signal Level, Gain Status, and Power Supply indicators.
Intelligent LCD Display indicators.

5.2. Automatic Level Control (ALC)

The booster features Automatic Level Control (ALC), which can extend the service life of the device by up to 10 times. ALC automatically adjusts the booster's output power to prevent oscillation and ensure stable operation, even with varying input signal strengths.

6. Troubleshooting

ALERT! Loopback / Oscillation Issues

During indoor antenna installation, you must ensure that the indoor antenna is positioned far away from the outdoor antenna. They should be separated by a solid wall and installed back-to-back to maintain adequate isolation. Failure to maintain proper separation may result in loopback or signal noise. In such cases, the cellphone may indicate a strong or fluctuating signal; however, calls may still drop and data speeds may remain low.

Diagrams illustrating common installation mistakes leading to loopback and how to avoid them. Mistakes include antennas too close or facing each other. Solutions involve separating antennas by walls, vertical distance (over 13 feet), or horizontal distance (over 30 feet).
Common installation mistakes and how to avoid loopback.

How to Avoid Loopback:

  • Outdoor and indoor antennas should be separated by two walls.
  • Outdoor and indoor antennas should be installed back-to-back.
  • Maintain a vertical distance of over 13 feet between antennas.
  • Maintain a horizontal distance of over 30 feet between antennas.

Other Potential Issues:

  • No Signal Improvement: Check if the outdoor antenna is receiving a strong enough signal (at least 2 bars or better than -105dB). Ensure all cable connections are secure and correctly connected to the 'BTS' (outdoor) and 'MS' (indoor) ports.
  • Weak Signal Improvement: Adjust the direction of the outdoor antenna to optimize signal reception. Ensure the indoor antenna is positioned to cover the desired area effectively.
  • Power Indicator Off: Verify the power adapter is correctly plugged into the booster and a working power outlet.

7. User Tips

  • Initial Testing: After installation, perform a test call and check data speeds in different areas of your home to confirm signal improvement.
  • Antenna Placement: Experiment with slight adjustments to the outdoor antenna's direction to find the absolute best signal. Even small changes can make a difference.
  • Cable Management: Ensure all cables are neatly routed and secured to prevent damage or interference.

8. Warranty and Support

For any issues while installing or operating your HWATEL cellular amplifier, please contact the technical support team through the following channels:

HWATEL Technology Co., Ltd Contact Information:

  • Address: Bldg 21, FengZeYingHe, Shangdi National High-Tech Park, Beijing, China, 100084
  • Website: www.hwatel.com
  • Email: info@hwatel.com / hwatel@foxmail.com
  • Phone Number: +86-18618303017
  • WhatsApp: +86-18618303017

An electronic user manual (PDF) is also available for detailed reference. You can access it via the provided link: HWATEL User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.