1. Introduction
The Steelmate 986E is a 1-way motorcycle alarm system designed to provide enhanced security for your motorcycle. It features remote engine start, engine immobilization, anti-hijacking capabilities, and a durable, waterproof ECU and remote transmitters. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your alarm system.
2. Features
- Durable 4-button transmitters.
- Waterproof ECU for reliable performance in various weather conditions.
- Remote engine start for convenience.
- Keyless driving functionality.
- Adjustable shock sensor sensitivity via transmitter.
- Anti-hijacking protection.
- Engine immobilization for enhanced security.
- Code hopping technology for secure communication.
- Mute mode option.
- Locating function.
3. Package Contents
Please check the package to ensure all items are present:
- 2 x Transmitters (Remote Controls)
- 1 x ECU (Electronic Control Unit)
- 1 x Alarm Speaker (Siren)
- 1 x Set of Installation Accessories (Wiring Harness, etc.)
- 1 x English User Manual (This Document)
4. Setup and Installation
Professional installation is highly recommended for this product. Incorrect wiring can damage the motorcycle's electrical system or the alarm unit. Always disconnect the motorcycle's battery before beginning installation.
4.1 ECU Placement
Proper placement of the ECU is critical for optimal performance and longevity. Follow these guidelines:
- Mount the ECU right-side up to prevent water ingress.
- Avoid mounting the ECU in narrow spaces that could restrict airflow or cause overheating.
- Do not mount the ECU close to motorcycle spark plugs or ignition coils to prevent interference with alarm performance.
4.2 Wiring Diagrams
Refer to the appropriate wiring diagram for your motorcycle's ignition type (AC or DC). Ensure all connections are secure and insulated.
4.2.1 For AC Ignition
4.2.2 For DC Ignition (Models 886M, 886N only)
5. Operating Instructions
5.1 Transmitter Functions
- Arm Button (Lock/Unlock Icon): Press to arm the alarm system.
- Disarm Button (Unlock Icon): Press to disarm the alarm system.
- Engine Start Button (Lightning Bolt Icon): Press twice within 3 seconds to remotely start the engine.
- Locating Button (Bell Icon): Press to activate the locating function (e.g., flash lights, chirp siren).
- LED Indicator Light: Provides visual feedback on system status.
5.2 Remote Engine Start
To start the engine remotely:
- Ensure the motorcycle is in neutral and safe to start.
- Press the Engine Start button (lightning bolt icon) twice within 3 seconds.
The engine will run for a programmed duration (typically 8 minutes) and then stop automatically. If the ignition key is turned to the ON position during this programmed duration, the engine will continue running under normal control.
5.3 Anti-Hijacking Feature
When the system detects an anti-hijacking trigger (e.g., ignition tampering), the siren will sound for 30 seconds, the turn signals will flash, and the engine will be immobilized to prevent theft.
5.4 Silent Mode
To enter silent mode, press the lock button twice within 3 seconds. This will arm the alarm without siren confirmation chirps.
6. Maintenance
- Keep ECU and Wiring Dry: Although the ECU is waterproof, avoid direct exposure to high-pressure water jets during washing. Ensure all wiring connections are properly sealed and protected from moisture.
- Remote Battery Replacement: If the remote control range decreases or the LED indicator light dims, replace the battery. Refer to the transmitter's casing for battery type.
- Regular Checks: Periodically check all wiring connections for corrosion or looseness. Ensure the siren is free from obstructions.
- Cleanliness: Keep the remote transmitters clean and free from dirt or debris.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm does not arm/disarm | Remote battery low; remote out of range; system malfunction. | Replace remote battery; move closer to motorcycle; check wiring; consult professional. |
| Remote engine start fails | Motorcycle not in neutral; incorrect button sequence; wiring issue. | Ensure neutral; press button twice quickly; check wiring; consult professional. |
| Siren is silent when armed/triggered | System in silent mode; siren wiring disconnected; siren malfunction. | Exit silent mode; check siren wiring; replace siren. |
| False alarms | Shock sensor sensitivity too high; loose components on motorcycle. | Adjust shock sensor sensitivity via transmitter; secure loose parts. |
8. Specifications
| Parameter | Value |
|---|---|
| Voltage | 9~16V |
| Static Current | <3.5mA |
| Siren SPL | 105dB~125dB |
| Frequency Range | 433.92MHz |
| Package Size | 15 x 12 x 6 cm (5.9 x 4.7 x 2.4 in) |
| Package Weight | 357g (12.6 oz) |
9. User Tips
- Remote Range: The effective range of the remote control can be affected by environmental factors and battery level. Ensure you are within reasonable proximity to your motorcycle for reliable operation.
- Engine Cut-off: The anti-hijacking feature is designed to immobilize the engine when triggered by ignition tampering. For safety, always ensure the motorcycle is stationary before activating any engine cut-off features.
- Ignition Timing: Some users inquire about adjusting ignition pulse or delayed ignition for specific motorcycle types (e.g., Fuel Injected). The 986E system's remote start is designed for general compatibility; specific advanced timing adjustments may not be directly configurable through the standard remote functions. Consult a professional installer for specialized requirements.
- Silent Mode Confirmation: Remember to press the lock button twice within 3 seconds to activate silent mode if you prefer to arm the alarm without audible confirmation.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.