1. Introduction
This manual provides detailed instructions for the operation and maintenance of your SKMEI 1997 Chrono Sport Watch. Please read it carefully to ensure proper use and to maximize the lifespan of your watch.
2. Product Overview
The SKMEI 1997 is a versatile digital sport watch designed for both men and women. It features a transparent TPU strap, a clear digital display with backlight, and a range of functions including a stopwatch, alarm, and date display. Its robust construction makes it suitable for various activities, including swimming.
3. Watch Components and Display
Familiarize yourself with the buttons and display elements of your SKMEI 1997 watch:
- LIGHT Button: Activates the backlight (Top Left).
- MODE Button: Cycles through different watch modes (Bottom Left).
- START/STOP Button: Used to start/stop functions or adjust settings (Top Right).
- RESET Button: Used to reset functions or move between setting options (Bottom Right).
- Display Indicators: PM, Week, Date, Alarm On (SIG), Second, Time.
4. Setup Instructions
4.1. Setting Time and Date
- Press the MODE button repeatedly until the time setting mode is activated. This is usually indicated by flashing digits (e.g., hours or minutes).
- Use the START/STOP button to adjust the selected flashing digit (hours, minutes, etc.).
- Press the RESET button to move to the next digit or setting option (e.g., from hours to minutes, then to date, month, year).
- Repeat steps 2 and 3 until all desired settings are correct.
- Once all settings are configured, press the MODE button to exit the setting mode and return to normal time display.
4.2. Setting the Alarm
- Press the MODE button to cycle through the watch modes until you reach the alarm setting mode.
- Use the START/STOP button to adjust the alarm hour.
- Press the RESET button to switch to the alarm minutes setting.
- Use the START/STOP button to adjust the alarm minutes.
- Press the MODE button to confirm the alarm time and exit the alarm setting mode.
- To activate or deactivate the alarm, press the RESET button while in the normal time display mode. An alarm icon (SIG) will appear on the display when the alarm is active and disappear when it is off.
5. Operating Instructions
5.1. Mode Switching
Press the MODE button to cycle through the available functions: Time Display, Chronograph (Stopwatch), and Alarm Setting.
5.2. Stopwatch Function (Chrono)
- Press the MODE button to enter the Chronograph mode.
- Press the START/STOP button to begin timing.
- Press the START/STOP button again to pause the stopwatch. Press it once more to resume.
- To reset the stopwatch to zero, press the RESET button while the stopwatch is paused.
5.3. Backlight Operation
Press the LIGHT button (top left) to illuminate the display. The backlight will typically stay on for a few seconds.
5.4. 12/24 Hour Format
The 12-hour (with AM/PM indicator) or 24-hour format is usually set during the initial time setting process. If you need to change it, access the time setting mode and look for an option to toggle between the formats using the START/STOP or RESET buttons.
6. Maintenance
6.1. Cleaning
Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or seals.
6.2. Water Resistance (5ATM / 50M)
Your SKMEI 1997 watch is water-resistant up to 50 meters (5ATM). This rating means it is suitable for daily use, hand washing, rain, and short periods of swimming. However, please observe the following:
- Do NOT press any buttons while the watch is submerged in water.
- Do NOT use the watch in hot water, saunas, or steam rooms, as high temperatures can compromise the water seals.
- Avoid exposing the watch to strong water jets or high-pressure water activities.
6.3. Battery Replacement
The watch uses a standard button cell battery. When the display becomes dim or the watch stops functioning, the battery may need replacement. For optimal performance and to ensure water resistance is maintained, battery replacement should ideally be performed by a qualified watch technician.
7. Troubleshooting
- Display is blank or dim: The battery may need replacement.
- Buttons are unresponsive: Ensure no buttons are stuck. If the issue persists, a professional check may be required.
- Time is inaccurate: Re-set the time and date carefully. If the inaccuracy continues, the battery might be low or the watch may require servicing.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | SKMEI |
| Model Number | 1997 |
| Weight | 38g |
| Movement | Digital |
| Dial Window Material Type | Hardlex (Crystal: Resin) |
| Case Material | PC (Rubber) |
| Band Material Type | TPU (Rubber) |
| Clasp Type | Bracelet Clasp (Buckle: Stainless Steel) |
| Water Resistance Depth | 5Bar (50M) |
| Features | Stop Watch, Back Light, Shock Resistant, LED Display, Repeater, Auto Date, Chronograph, Complete Calendar, DIVER, Water-Resistance, Alarm, Swim, Week Display, 12/24 hour clock |
| Dial Diameter (Case Width) | 44.5mm |
| Case Thickness | 9.8mm |
| Band Width | 22mm |
| Band Length | 245mm |
| Style | Fashion & Casual |
| Boxes & Cases Material | No package |
| Origin | Mainland China |
| Certification | None |
9. User Tips
- To conserve battery life, avoid excessive use of the backlight.
- Regularly check the time and date settings, especially after battery changes or if the watch has been stored for a long time.
- While water-resistant, it's best to avoid prolonged exposure to water or extreme temperatures to maintain the watch's integrity.
10. Warranty and Support
For any issues or questions regarding your SKMEI 1997 Chrono Sport Watch, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
