1. Introduction
The Renolink V2.1 OBD2 ECU Programmer Tool is a powerful diagnostic and programming device designed for Renault and Dacia vehicles. It allows users to perform various functions such as UCH matching, airbag programming, engine ECU programming, key coding, key deletion, dashboard coding, and eeprom/flash reading and writing.

Figure 1: Renolink V2.1 OBD2 ECU Programmer Tool components.
2. Setup and Installation
2.1 Software Installation
- Insert the provided software CD into your computer's CD/DVD drive.
- Follow the on-screen instructions to install the Renolink software.
- Important Note: If the CD is damaged or unreadable, please contact your seller to obtain a software download link (e.g., MEGA link).
- After installation, launch the Renolink software. You may receive a warning: "For the best performances set Latency Timer to 1 ms on serial port." Click OK to proceed.
2.2 Hardware Connection
- Connect the Renolink programmer device to your computer via the USB cable.
- Locate the OBD2 port in your vehicle (typically under the dashboard).
- Connect the Renolink device's OBD2 connector to your vehicle's OBD2 port.

Figure 2: Renolink V2.1 OBD2 connector.
2.3 Initial Software Scan
Once the hardware is connected and the software is launched, you can initiate a scan to detect the vehicle's ECU. The software interface will guide you through selecting the appropriate ECU option and protocol.
Video 1: Demonstration of Renolink software usage, including initial scan and parameter viewing.
3. Operating Instructions
The Renolink V2.1 offers a wide range of functionalities for Renault and Dacia vehicles. Below is a summary of its key features and capabilities:
3.1 Core Functions
- Eprom Read/Write: Read and write data to the EEPROM.
- ECU Resetting: Reset Engine Control Units.
- Clear Crash Airbag: Clear crash data from airbag modules.
- Air-bag Reset: Reset airbag systems.
- Air-bag Virginize: Virginize airbag modules for reuse.
- Key Programming: Program new keys for vehicles.
- TDB (Cluster): Access and program instrument clusters.
- Indicator Programming: Program various vehicle indicators.
- ECM Programming: Program Engine Control Modules.
- UCH Programming: Program Unit Control Housing (UCH).
- EPS Virginizer: Virginize Electric Power Steering (EPS) units.
- EPS Resetting: Reset Electric Power Steering (EPS) systems.

Figure 3: Visual representation of Renolink's key functions.
3.2 Recent Updates and Vehicle Support (V2.1)
- PIN Code Reading: Added for HFM Renault Clio 4 and Renault Captur 2016+. A valid card is required for HFM teaching after virginization.
- Steering Assist Virginizer: For Renault Megane 4, Scenic 4, Kadjar, and Talisman. Coding is automatic at the first ignition.
- Card Programming: For Clio4 (2012-2015).
- Immo Code Deletion: From power steering (DAE) in Dacia Duster ph3. Encoding is automatic.
- ECU Learning: For Dacia Logan 2 / Sandero / Lodgy / Docker / Duster ph2 (addresses common ECM V42 issues).
- Dashboard Read/Write:
- Eeprom and flash for Dacia Logan2 / Sandero2 / Lodgy / Docker / Duster ph2 (years 2013-2014 and 2014-2017).
- Flash, eeprom, and KM for dashboard (VDO) for Mégane 3 and Fluence 2015+.
- Flash, eeprom, and KM for Laguna 3 dashboard.
- KM, eeprom, and flash for dashboard Renault Fluence.
- KM for dashboard Renault Modus.
- KM and eeprom for dashboard Koleos.
- Key Programming UCH BMT Sagem: For Dacia Solenza, Supernova, Renault Twingo, Kangoo, Master (years 1998-2003).
- Key Programming for Dacia Models: Logan 2, Sandero 2, Duster ph 2, Lodgy, Dokker.
- Key Programming for Renault Models: Clio Symbol 3.

Figure 4: Renolink software interface for ECU scanning.

Figure 5: Renolink software displaying engine parameters.

Figure 6: Renolink software displaying detailed vehicle parameters.
4. Maintenance
To ensure the longevity and optimal performance of your Renolink V2.1 device, follow these maintenance guidelines:
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive cleaners.
- Cable Care: Avoid bending or twisting the cables excessively. Store them neatly to prevent damage.
- Software Updates: Regularly check for software updates from the manufacturer to ensure compatibility with newer vehicle models and to access the latest features.
5. Troubleshooting
If you encounter issues while using your Renolink V2.1 device, consider the following:
- Connection Issues: Ensure all cables are securely connected to the device, computer, and vehicle's OBD2 port.
- Software Not Launching: Verify that the software was installed correctly. Try reinstalling the software if necessary.
- Device Not Recognized: Check your computer's device manager to ensure the Renolink device drivers are installed and functioning correctly.
- Performance Warning: If you receive a warning about "Latency Timer," ensure it is set to 1 ms in your serial port settings for best performance.
- Vehicle Communication Errors: Ensure the vehicle's ignition is on (or engine running, as required by the specific function). Check that the correct ECU option and scan protocol are selected in the software.
- Software Language: The software supports French and English. Ensure you have selected your preferred language.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | OBDOK |
| Model | Renolink V2.1 |
| Software Version | Renolink V2.1 |
| Hardware Version | V2.1 Reno Link |
| Item Type | Car Diagnostic Cables and Connectors |
| Material | Plastic & Metal |
| Voltage | 12V |
| Item Weight | 0.15kg |
| Size | 12*10*8cm |
| Origin | Mainland China |
| Certification | CE |
| External Testing Certification | ce |
| Electronic | No |
| Is Batteries Included | No |
| Use | Not Telecommunication |
| High-concerned chemical | None |
7. User Tips
- Software Access: If the physical software CD is damaged, immediately contact your seller for a digital download link to ensure you can install the necessary software.
- Optimal Performance: For the best performance of the Renolink tool, ensure the Latency Timer for the serial port is set to 1 ms in your computer's device settings.
- Automatic Coding: Be aware that some procedures, like virginizing steering assist or deleting immo codes from DAE in Dacia Duster ph3, will automatically perform coding upon the first ignition after the operation.
- Database Updates: The software includes updated databases (e.g., December 2019, July 2019). Keep your software updated to ensure compatibility with the latest vehicle models and features.
8. Warranty and Support
The Renolink V2.1 OBD2 ECU Programmer Tool comes with a 1-year warranty. For any technical support, warranty claims, or further assistance, please contact your original point of purchase or the manufacturer's customer service.