AULA F98 Pro V2

Contents

AULA F98 Pro V2 Tri-mode Wireless Mechanical Keyboard

User Manual

Introduction

The AULA F98 Pro V2 is a versatile 95-key customized mechanical keyboard designed for gamers and PC enthusiasts. It features a tri-mode connection (Bluetooth, 2.4G wireless, and wired Type-C), hot-swappable switches, PBT keycaps, and vibrant RGB backlighting. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance and longevity.

AULA F98 Pro V2 Keyboard in two color variants
The AULA F98 Pro V2 Tri-mode Wireless Mechanical Keyboard.

Setup

Package Contents

Before proceeding, please ensure all components are present:

  • AULA F98 Pro V2 Mechanical Keyboard
  • USB Type-C Cable
  • 2.4G USB Receiver
  • Keycap Puller / Switch Puller (may vary by package)
  • User Manual (this document)

Battery Installation and Charging

The keyboard features a built-in 4000mAh large-capacity lithium battery. An additional battery can be installed for extended life. Ensure the keyboard is charged before first use.

  1. Locate the independent battery compartment on the underside of the keyboard.
  2. If installing an additional battery, carefully place it into the compartment.
  3. Connect the USB Type-C cable to the keyboard's Type-C port and the other end to a power source (e.g., computer USB port, USB wall adapter).
  4. The intelligent display screen will show charging status.
Diagram showing battery compartment and optional second battery
Independent battery compartment design, allowing for an additional battery for longer battery life.
Close-up of the Type-C charging port
Type-C interface for faster charging.

Connection Modes

The AULA F98 Pro V2 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth 5.0.

Icons for 2.4G Wireless, Type-C Wired, and Bluetooth 5.0 connections
The keyboard supports 2.4G Wireless, Type-C Wired, and Bluetooth 5.0 connections.

1. Wired Connection (Type-C)

For a stable, low-latency connection, use the provided USB Type-C cable.

  1. Connect the Type-C end of the cable to the keyboard's port.
  2. Connect the USB-A end to an available USB port on your computer.
  3. The keyboard will be automatically recognized and ready for use.

2. 2.4G Wireless Connection

For a reliable wireless connection with a dedicated USB receiver.

  1. Locate the 2.4G USB receiver, typically stored in a magnetic slot on the keyboard's bottom.
  2. Plug the 2.4G USB receiver into an available USB port on your computer.
  3. Switch the keyboard to 2.4G wireless mode (refer to the operating instructions for mode switching).
  4. The keyboard should connect automatically.
Image showing the 2.4G USB receiver storage bin and adjustable feet
The 2.4G USB receiver is stored in a magnetic slot for convenience and to prevent loss. The keyboard also features a double-segment support frame for adjustable typing angles.

3. Bluetooth 5.0 Connection

The keyboard supports connecting up to 4 Bluetooth devices and switching between them.

  1. Switch the keyboard to Bluetooth mode (refer to the operating instructions for mode switching).
  2. On your device (PC, laptop, tablet, phone), enable Bluetooth and search for new devices.
  3. Select 'AULA F98 Pro V2' from the list of available devices to pair.
  4. To switch between paired Bluetooth devices, use the function keys:
    • FN+1: Switch to Bluetooth device 1
    • FN+2: Switch to Bluetooth device 2
    • FN+3: Switch to Bluetooth device 3
Keyboard connected to multiple devices via Bluetooth
The keyboard supports Bluetooth 5.0, allowing connection to multiple devices like PCs, laptops, and mobile devices.

Operating Instructions

Mode Switching

Use the dedicated switch or function key combination to toggle between Wired, 2.4G, and Bluetooth modes. The intelligent display screen will indicate the current connection mode.

Intelligent Display Screen

The keyboard features an intelligent display screen that provides real-time information:

  • Current connection mode (Wired, 2.4G, BT1, BT2, BT3)
  • Power icon and percentage
  • System (Windows/macOS)
  • Lamp effect (RGB backlight settings)
  • Voltage state

Multi-function Knob

The multi-function knob offers precise control with a damping sense, enhancing the user experience. Its functions can typically be customized or control volume/backlight brightness by default.

RGB Backlight Control

The keyboard boasts a cool RGB backlight effect with 16 million colors. Use dedicated function keys (often FN + arrow keys or other designated keys) to cycle through various lighting modes, adjust brightness, and change colors. The intelligent display screen can show the current lamp effect.

Keyboard with vibrant RGB backlighting
The keyboard features a cool RGB backlight effect with 16 million colors to choose from.
Keyboard with RGB side lighting
The keyboard also features dazzling double-sided RGB lighting.

Hot-swappable Switches

The AULA F98 Pro V2 supports full-key hot-swapping, allowing you to customize your typing experience by replacing switches without soldering. It is compatible with most 3-pin and 5-pin mechanical shaft bodies on the market.

  1. Using a switch puller, gently grip the switch and pull it straight up to remove it.
  2. Align the pins of the new switch with the holes on the PCB.
  3. Press the new switch firmly into place until it clicks. Ensure the pins are not bent.
Image showing hot-swappable switches being removed from the keyboard
The full key hot-plug feature allows customization of your favorite switch configuration.

Keycap Replacement

The keyboard comes with durable PBT keycaps, known for their texture and light transmission. You can replace them with various styles, including side-engraved keycaps.

  1. Use a keycap puller to gently remove the desired keycap.
  2. Align the new keycap with the switch stem and press down firmly until it is seated.
Image showing various keycap styles
Various keycap styles are available, including Dust Side Engraved, Lucky Strike, Fog Blue Side Engraved, and Incense Side Engraved keycaps.
Image showing different side-engraved keycap options
Examples of side-engraved keycap options.

Ergonomic Design

The keyboard features a double-section rubber non-slip tripod design, allowing you to adjust the typing angle to three different positions for enhanced comfort.

Maintenance

  • Cleaning: Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, use compressed air to remove dust and debris from between keycaps. For stubborn stains, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the keyboard.
  • Keycap Care: PBT keycaps are durable but can still accumulate oils and dirt. Remove keycaps periodically using a keycap puller and clean them with warm soapy water. Ensure they are completely dry before reattaching.
  • Switch Care: If you experience issues with a specific switch, you can hot-swap it out for cleaning or replacement. Avoid excessive force when removing or inserting switches to prevent damage to the PCB sockets.
  • Battery Care: To prolong battery life, avoid fully discharging the keyboard frequently. Store the keyboard in a cool, dry place when not in use for extended periods.
  • Storage: When not in use, store the 2.4G USB receiver in its magnetic storage bin on the keyboard's bottom to prevent loss.

Troubleshooting

Connection Issues

  • Keyboard not connecting via 2.4G: Ensure the USB receiver is securely plugged into a working USB port and the keyboard is switched to 2.4G mode. Try a different USB port.
  • Bluetooth pairing failure: Make sure the keyboard is in Bluetooth pairing mode (often indicated on the intelligent display). Ensure your device's Bluetooth is on and discoverable. Forget previous pairings on your device and try again.
  • Intermittent wireless connection: Check for interference from other wireless devices. Ensure the keyboard is within range of the receiver/Bluetooth device. Charge the keyboard battery.

Keys Not Responding

  • Specific keys not working: The hot-swappable nature allows for easy troubleshooting. Try removing and re-inserting the switch for the problematic key. If the issue persists, try swapping it with a known working switch to determine if the switch or the socket is faulty.
  • Multiple keys not working: Ensure the keyboard is fully charged. Try switching connection modes (wired, 2.4G, Bluetooth) to rule out a mode-specific issue.

Backlight Issues

  • RGB backlight not working: Check the keyboard's settings via function keys or software (if available) to ensure the backlight is enabled and brightness is turned up.
  • Inconsistent lighting: This could indicate a software glitch or a faulty LED. Try resetting the keyboard (if a reset function is available) or updating firmware.

Charging Problems

  • Keyboard not charging: Ensure the Type-C cable is properly connected to both the keyboard and the power source. Try a different Type-C cable or USB port/charger. Check the intelligent display for charging indicators.

Specifications

Feature Detail
Product Model AULA F98 Pro V2
Keyboard Type 95-key customized keyboard, light position version
Connection Modes Bluetooth 5.0 / 2.4G Wireless / Wired (Type-C)
Keyboard Material Transparent PC material
Keycap Material PBT material
Product Dimensions 385 × 138.2 × 40.68 ± 0.5mm
Product Weight ~1060g (excluding wire/receiver), ~1095g (including wire/receiver)
Battery Capacity Built-in 4000mAh lithium battery (supports additional battery)
Switches Hot-swappable (compatible with 3-pin/5-pin shaft bodies)
Backlight RGB, 16 million colors
Polling Rate 1000Hz
Compatible Platforms Windows, macOS, iOS, Android

Mechanical Switch Specifications

The keyboard supports various mechanical switches. Below are details for some common options:

Specifications for LEOBOG Ash Wood Axis V4, Kailh BOX Find Autumn Axis, and TTC Gold Powder Axis V2
Detailed specifications for LEOBOG Ash Wood Axis V4 (Linear), Kailh BOX Find Autumn Axis (Paragraph), and TTC Gold Powder Axis V2 (Linear).
Specifications for TTC Fast Silver Axis V2, TTC Giant Heart RGB, and TTC Rabbit Axis RGB Silent
Detailed specifications for TTC Fast Silver Axis V2 (Linear), TTC Giant Heart RGB Mechanical Axis (Linear Fast), and TTC Rabbit Axis RGB Silent Linear Fast Axis.
Switch Type Shaft Core Material Initial Pressure Conduction Pressure Total Stroke Conduction Stroke/Travel Mechanical Life Axis Properties
LEOBOG Ash Wood Axis V4 POM material 30gf Min 40±3gf 3.6±0.3mm 1.5±0.3mm N/A Linear Axis
Kailh BOX Find Autumn Axis N/A 50±15gf (Operating) 55±10gf (Touch) 3.6±0.3mm 1.8±0.4mm 80 million times Paragraph Axis
TTC Gold Powder Axis V2 N/A 37gf (Trigger) N/A 4.0mm 2.0mm (Trigger) 0.1 billion times Linear Axis
TTC Fast Silver Axis V2 N/A 39gf min (Initial) 45±4gf 3.4±0.4mm 1.08+0.4/-0.08mm 0.1 billion times Linear Axis
TTC Giant Heart RGB Mechanical Axis N/A 42g (Trigger) N/A 3.6mm 1.2mm (Trigger) 0.1 billion times Linear Fast Axis
TTC Rabbit Axis RGB Silent Linear Fast Axis N/A 42gf (Trigger) N/A 3.5mm 1.2mm (Trigger) 0.1 billion times Linear Fast Axis

User Tips

  • Experiment with Switches: Take advantage of the hot-swap feature to try different switch types. This allows you to find the perfect feel and sound for your typing or gaming preferences without needing a new keyboard.
  • Customize RGB: Explore the various RGB lighting modes and colors. Personalizing the backlight can enhance your setup's aesthetics and improve visibility in low-light conditions.
  • Optimize Ergonomics: Use the adjustable two-stage feet to find the most comfortable typing angle for extended use, reducing strain on your wrists.
  • Seamless Device Switching: Utilize the Bluetooth multi-device connection (FN+1/2/3) for quick transitions between your computer, tablet, and phone, boosting productivity.
  • Keep Receiver Safe: Always store the 2.4G USB receiver in its magnetic slot when not in use to prevent misplacement.

Warranty & Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

For general inquiries or further assistance, please reach out to the AULA customer support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.