Feyree 7KW 32A Portable EV Charger User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation of your Feyree 7KW 32A Portable EV Charger. Please read this manual thoroughly before use and retain it for future reference.

The Feyree portable EV charger is designed for convenient and flexible charging of electric vehicles, offering features like adjustable current, delayed charging, and smart app control. It is built with high-strength materials and multiple protection mechanisms to ensure safety and durability.

2. Safety Warnings and Precautions

2.1. WARNING!

• Avoid immersing the AC charging connection device in water.
• Do not step on, pull, bend, or knot the charging cable.
• Do not insert foreign objects into any part of the charging vehicle connector.
• Refrain from dropping the control box or placing heavy objects on its surface.
• Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
• Ensure the operating ambient temperature of the equipment remains within the range of -30°C to +55°C.
• Do not use the charger if you, the vehicle, or the charger is exposed to severe rain.
• Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
• Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
• Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
• This product is exclusively designed for electric vehicle charging purposes.
• Avoid using external wires or adapters.
• Never insert your fingers into the charging plug.
• The EV charger is not user serviceable. Contact customer support for any repairs.
• If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
• Never allow children to play with the charger cable.
• To avoid the risk of fire or electric shock, do not use this device with an extension cord.
• Using a worn or damaged AC outlet may cause burns or start a fire.
• Risk of explosion. This equipment has an arc or sparking parts that should not be exposed to flammable vapors.
• Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.

2.2. CAUTION! Please Note Before Start Charging

• It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. Installation must comply with local codes.
• This product must be grounded. Grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
• Ensure the power plug and socket are compatible before initiating the charging process.
• Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. If the socket is dirty or wet, disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
• Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.

3. Product Overview

The Feyree Portable EV Charger is a robust and intelligent charging solution for electric vehicles. It features a durable control box, a GBT plug, and a CEE 3-pin 32A plug (or adapter depending on model).

3.1. Package Contents

Upon opening the package, you should find the following items:

• Feyree Portable EV Charger with integrated cable and GBT plug
• CEE 3-pin 32A plug (or adapter)
• GBT Plug Holder
• Charger Holder (for wall mounting)
• User Manual
• Storage Bag
• Mounting Screws and Wall Anchors

Image: Package Contents

3.2. Control Box Features and Dimensions

The control box is the central unit for managing the charging process. It features a smart LCD display and capacitive touch buttons for interaction.

Image: Control Box Dimensions and Holder

The control box measures approximately 113mm (width) x 260mm (length) x 66mm (depth).

3.3. LCD Display Overview

The 2.8-inch LCD display provides real-time charging information and status indicators:

Image: LCD Display Information

• Wifi State: Connection Waiting, Connect, Not Connected.
• Charging Status: Indicates if charging is active.
• Charging Voltage: Current voltage (e.g., 220.6V).
• Real-time Temperature: Internal temperature of the charger (e.g., 31°C).
• Real-time Power: Current power output (e.g., 0.00kW).
• Set Delayed Charging Time (D:): Configured delay before charging starts.
• Set Charging Time (T:): Configured duration for charging.
• Selectable Current: Current charging amperage (e.g., 32A).
• Charging Current: Actual current being drawn (e.g., 0.0A).
• Power Consumption: Total energy consumed (e.g., 0.00kWh).

4. Setup and Installation

Before initial use, ensure all components are present and undamaged. Consider mounting the charger holder for convenience.

4.1. Mounting the Charger Holder

The included charger holder can be mounted on a wall for a semi-permanent charging station setup. Use the provided screws and wall anchors.

Image: Multi-function Usage (Portable and Wall-Mounted)

4.2. Initial Checks

• Visually inspect the charger, cable, and plugs for any signs of wear, damage, or corrosion.
• Ensure the electrical outlet you intend to use is properly grounded and installed by a qualified electrician, complying with local codes.
• Confirm the power plug and vehicle socket are compatible.

5. Operating Instructions

5.1. Control Box Button Functions

The control box features three main buttons for direct interaction:

Image: Smart LCD and Button Functions

• Button A (Adjust Current): Press to cycle through available current settings (8A-10A-13A-16A-20A-25A-32A). This can only be done before charging starts.
• Button D (Set Delay Time): Press to enter the delay time setting (0-15 hours).
• Button T (Set Charging Time): Short press to set the charging duration (0-15 hours). Long press (5-10 seconds) to enter the main menu/settings page.

Note: The charging current cannot be adjusted while charging is in progress.

5.2. Charging Steps

1. Adjust Current: Before connecting to your EV, tap button "A" to select your desired charging current. Ensure the selected current does not exceed your electrical supply's capacity.
2. Plug in the Charging Connector: Connect the GBT plug to your electric vehicle's charging port.
3. Start Charging: The charger will typically initiate charging automatically. Monitor the LCD display for status.

Image: Charger Connected to EV

5.3. Ending Charging

There are several ways to end the charging process:

• Plan A (Automatic Stop): The charger will automatically stop when the car is fully charged. You can then safely unplug the charger.
• Plan B (Power Switch): Turn off the main power switch supplying the charger, then unplug the charger.
• Plan C (In-Car Control): Use the stop charging button or switch within your electric vehicle, then unplug the charger plug.
• Plan D (App Control): If using the app, click "Stop charging" in the app, then pull out the charger plug.

WARNING: Do not unplug the charger directly from the vehicle or power source while charging is active, unless in an emergency. Always stop charging first using one of the methods above.

5.4. Smart APP Operation (Wi-Fi & Bluetooth Version)

The charger can be controlled and monitored via a smart application. This requires the charger to have Wi-Fi and Bluetooth functionality.

1. Download App: Download "Tuya Smart" or "Smart Life" app from your phone's app store (available on Google Play and Apple App Store).
2. Add Device: Open the app, ensure your phone's Wi-Fi and Bluetooth are enabled. Select "Add Device". The app should automatically discover the charger. Follow the on-screen prompts to add the device.
3. Control and Monitor: Once connected, you can:
   • Adjust charging current (8A-32A).
   • Set delay charging time (1-15 hours).
   • Set charging duration (1-15 hours).
   • Monitor real-time charging status (voltage, current, power, temperature).
   • Schedule charging periods to take advantage of off-peak electricity rates.

Image: APP Remote Monitoring of Charging Status

Image: Set up Charging Periods to Save Money

Image: App Use Without WiFi (Bluetooth/Hotspot)

5.5. Control Box Menu Navigation

To access advanced settings and information directly from the control box:

1. Enter Menu: Long press the "T" button for 5-10 seconds to enter the menu page.
2. Navigate: Use "A" to move downward, "D" to enter a selection, and "T" to go back.
3. Menu Options:
   • Charge Plan: View or modify current charge plan settings.
   • Charge Log: Review past charging sessions.
   • Settings: Adjust various parameters like Leakage Check, Ground Check, Min/Max Voltage, Reset Wifi, Clear Data.
   • About Device: View device information such as Type, RCD, CP, Sum, Times, Duration, HV, SV.

Image: Query Device Information / Menu Navigation

Image: How to Reset WiFi Connection

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your EV charger.

• Regular Inspection: Periodically inspect the charging cable, plugs, and control box for any signs of wear, damage, or corrosion.
• Cleaning: Keep the charging plug and control box clean and dry. If they become dirty or wet, disconnect power and wipe with a dry, clean cloth.
• Storage: When not in use, store the charger in its provided storage bag in a dry, safe place, away from extreme temperatures and direct sunlight.
• Avoid Physical Stress: Do not step on, pull, bend, or knot the charging cable. Avoid dropping the control box or placing heavy objects on it.
• No User-Serviceable Parts: The charger unit contains no user-serviceable parts. Do not attempt to open, disassemble, or repair the device yourself. Refer all servicing to qualified service personnel.

7. Troubleshooting

This section provides solutions to common issues you might encounter. For persistent problems, contact customer support.

7.1. LCD Display Error Warnings

The LCD display may show various warnings to indicate a problem:

• Error cp: Charging plug CC/CP connection abnormality.
• Under Voltage: Input voltage is too low (below 85V).
• Over Voltage: Input voltage is too high (above 264V).
• Leakage: Leakage current detected.
• Over Current: AC input current is too high.
• Over TEMP: Charger internal temperature is too high (above 85°C).
• PE missing warns: Protective Earth (ground) missing.
• Leakage self check: Issue with internal leakage detection.
• Relay self check: Issue with internal relay.

Image: Control Box LCD Display Error Warnings

7.2. Common Faults and Solutions

8. Specifications

The Feyree Portable EV Charger is available in different configurations (TYPE2, GB/T, TYPE1, TS-NACS) with varying power ratings. The following tables detail the specifications for common models.

8.1. General Specifications

• Brand Name: Feyree
• Charger Type: Portable EV Charger
• Material: Copper alloy, silver plating (pins)
• Operating Temperature: -30°C ~ +55°C
• IP Rating: IP66 (Charger Plug & Box)
• Wireless Support: Wifi, Bluetooth (for APP versions)
• RCD: TypeB AC30mA + DC6mA
• Feature: Smart APP Control
• Cable Length: 5m
• Weight: 4KG
• Dimensions (Control Box): Length 38CM, Width 38CM, Height 10CM (Note: Image shows 260mm x 113mm x 66mm for control box, 38cm for overall length/width might refer to packaging or total cable length)

8.2. Detailed Specifications by Type

Image: Wi-Fi Smart APP Specifications

8.3. Compatibility

The Feyree EV charger is compatible with a wide range of EV brands, including BYD, Tesla, Audi, Mercedes-Benz, BMW, Volkswagen, KIA, NIO, Volvo, Hyundai, Ford, MG, Toyota, Wuling, Geely Auto, Jeep, AION, and more.

Image: Compatible with All EV Brands

9. User Tips

• App Control: The app provides excellent remote control and monitoring capabilities. It's intuitive and easy to connect.
• Current Adjustment: You can precisely adjust the current strength through the app in increments of 1 ampere, offering flexibility for different charging needs.
• Grounding: The charger may function even without a ground connection in the outlet, but for safety and optimal performance, always ensure proper grounding as recommended in the precautions.
• Cable Quality: Users have noted the cable is thick and appears to be of high quality, contributing to durability and safety.
• Temperature: The charger generally does not heat up excessively during operation, indicating good thermal management.

10. Warranty and Support

10.1. Warranty Information

Feyree offers a two-year warranty to customers who purchase original Feyree products. This warranty covers manufacturing defects and ensures product reliability.

10.2. Lifetime Technical Support

For any product-related issues or technical assistance, Feyree provides lifetime technical support. You are encouraged to reach out to them, providing pictures and videos for faster resolution.

10.3. Warranty Exclusions

The warranty does not cover:

• Any product damage resulting from failure to follow the recommended guidelines in this manual.
• Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
• Products not purchased as original Feyree products.
• Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.

10.4. Customer Service

For customer service and technical support, please contact Feyree via email:

E-mail: tina@feyree.com

You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)

11. FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antennas.

Image: APP Download QR Codes