Introduction
Thank you for choosing the Disney E66 Wireless Bluetooth Headset. This manual provides essential information for setting up, operating, and maintaining your new earbuds. Please read it carefully before use to ensure optimal performance and longevity of your device.
The Disney E66 Wireless Bluetooth Headset offers high-fidelity sound, smart touch controls, and a unique gradient breathing light. Featuring Bluetooth 5.3 for stable connectivity, active noise cancellation, and a comfortable in-ear design, these waterproof earbuds are perfect for gaming, music, and sports. The compact charging case includes a USB Type-C adapter for convenient power.
Package Contents
Ensure all items are present in your package:
- Disney E66 Wireless Bluetooth Headset (Left and Right Earbuds)
- Charging Case
- USB Type-C Charging Cable
- User Manual (this document)

Setup
1. Charging the Earbuds and Case
- Place the earbuds into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a compatible USB power source (e.g., wall adapter, computer USB port).
- The indicator light on the charging case will show charging status. A full charge typically takes approximately 1-2 hours.
- Ensure the case is fully charged before first use for optimal battery life.
2. Initial Pairing
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "Disney E66" in the list of available Bluetooth devices.
- Select "Disney E66" to connect. Once connected, you will hear a confirmation tone, and the earbuds' indicator lights will change.

3. Wearing the Earbuds
- Gently insert each earbud into your ear canal.
- Adjust the angle for a secure and comfortable fit. A proper fit enhances sound quality and active noise cancellation.

Operating Instructions
Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically disconnect and power off.
Touch Controls
The Disney E66 earbuds feature smart touch controls for easy management of music and calls. Specific touch gestures may vary slightly, but common functions include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
- Activate Voice Assistant: Triple tap on either earbud (if supported by your device).
- Volume Control: The product specifications indicate volume control is available, typically managed by specific touch gestures or through the connected device.
Active Noise Cancellation (ANC)
The earbuds support Active Noise Cancellation. To activate or deactivate ANC, refer to the specific touch control gestures in the quick start guide or experiment with pressing and holding an earbud for a longer duration (e.g., 3 seconds) until you hear a mode change confirmation.
Gradient Breathing Light
The charging case features a variable seven-color gradient breathing light, adding a unique visual element to your earbuds. This light typically activates during charging or when the case is opened, indicating status or simply for aesthetic appeal.

Product Demonstration Video
Maintenance
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
- Water Resistance: The earbuds are waterproof. However, avoid prolonged exposure to water or submersion. Ensure they are dry before placing them back in the charging case.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage.
- Battery Care: To prolong battery life, avoid fully discharging the earbuds and charging case frequently. Charge them regularly, even if not in constant use.
Troubleshooting
- Earbuds not pairing:
- Ensure both earbuds are charged.
- Place them back in the case, close the lid, wait a few seconds, then open it again to re-enter pairing mode.
- Turn off and on Bluetooth on your device.
- Forget "Disney E66" from your device's Bluetooth list and try pairing again.
- No sound from one earbud:
- Ensure both earbuds are charged and properly connected.
- Try resetting the earbuds (refer to pairing steps).
- Charging case not charging:
- Check the USB Type-C cable and power adapter for damage.
- Try a different charging cable or power source.
- Ensure the charging port on the case is clean and free of debris.
- Poor sound quality:
- Ensure the earbuds are properly seated in your ears for a good seal.
- Clean any earwax or debris from the earbud nozzles.
- Move closer to your connected device to avoid interference.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Disney |
| Model | E66 |
| Material | Plastic |
| Category | Earphones & Headphones |
| Number Of Drivers | 2 |
| Charging Method | Charging case (USB Type-C) |
| Driver Diameter | 13mm |
| Total Harmonic Distortion | 2% |
| Impedance Range | up to 32 Ω |
| Bluetooth Version | 5.3 |
| Codecs | AAC |
| With Microphone | Yes |
| Is wireless | Yes |
| Support APP | No |
| Waterproof | Yes |
| Frequency Response Range | -Hz (Information not specified) |
| Sensitivity | 100dB |
| Function | for Video Game, Common Headphone, HiFi Headphone, Sport |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | No (Smart Touch) |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Style | In-ear |
| Certification | CE |
| Origin | Mainland China |
| Support Memory Card | No |
| Resistance | 30Ω |
Physical Dimensions (Charging Case)
- Length: 13 cm
- Width: 13 cm
- Height: 4 cm
- Weight: 0.1 kg (100g)

User Tips
- Optimal Sound: Experiment with different earbud positions to find the best seal for enhanced bass and effective noise cancellation.
- Touch Sensitivity: If touch controls are unresponsive, ensure your fingers are clean and dry. A firm, deliberate tap usually works best.
- Battery Management: For longer trips, always carry the fully charged case. A quick charge can provide hours of listening time.
- Character Selection: The earbuds come in various Disney character designs (Stitch, Lotso, Minnie, Winnie Pooh). Choose your favorite to personalize your listening experience.
Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the retailer or manufacturer directly with your proof of purchase.
For further assistance, please refer to the contact information provided by your point of purchase.