Lexin G1 Motorcycle Bluetooth Headsets User Manual

Introduction

Thank you for choosing the Lexin G1 Motorcycle Bluetooth Headsets. This manual provides essential information for setting up, operating, and maintaining your device. The Lexin G1 is designed to enhance your riding experience with clear audio, hands-free communication, and robust features.

Package Contents

Please verify that all items listed below are included in your package:

• G1 Main Unit
• 40MM HI-FI Speakers and Microphones (Boom and Soft mic options)
• User Manual
• Boom Microphone Holder
• USB-C Cable
• Decorative Shells (various colors)
• Speaker Pads
• 3M Tape Mounting Bracket
• Clip Mounting Bracket

Specifications

Setup

1. Mounting the Headset

The Lexin G1 can be mounted to various helmet types including Half Helmet, Open face, Full Face, and Flip Up Helmets. Choose between the 3M Tape Mounting Bracket or the Clip Mounting Bracket based on your helmet type and preference.

• Clip Mounting Bracket: Securely attaches to the helmet shell edge.
• 3M Tape Mounting Bracket: Provides a strong adhesive bond to a flat surface on your helmet.

2. Installing Speakers and Microphone

Place the 40MM HI-FI Speakers inside your helmet, aligning them with your ears for optimal sound. Use the provided speaker pads for comfort and proper fit. Attach the boom microphone (or soft mic, if preferred) to the inside of the helmet, positioning it close to your mouth for clear voice pickup.

3. Initial Charging

Before first use, fully charge the Lexin G1 using the provided USB-C cable. Connect the cable to the USB-C port on the headset and a compatible power source. The charging indicator will show the charging status.

4. Bluetooth Pairing

To pair your Lexin G1 with your smartphone or GPS device:

1. Ensure the Lexin G1 is turned off.
2. Press and hold the Power Button until the LED indicator flashes rapidly, indicating pairing mode.
3. On your device (smartphone/GPS), enable Bluetooth and search for available devices.
4. Select 'Lexin G1' from the list of found devices.
5. Once connected, the LED indicator on the G1 will change to a slow flash or solid blue, depending on the device status.

Operating Instructions

1. Power On/Off

• Power On: Press and hold the Power Button until the LED indicator lights up.
• Power Off: Press and hold the Power Button until the LED indicator turns off.

2. Basic Functions

• Play/Pause Music: Press the Power Button once.
• Next Song / Volume Down: Press the 'Next Song / Volume Down Button'.
• Previous Song / Volume Up: Press the 'Previous Song / Volume Up Button'.
• Answer/End Call: Press the Power Button once.
• Reject Call: Press and hold the Power Button.
• Activate Voice Assistant (Siri/S-voice): Press the 'Voice Assistant Button'.
• Connect to GPS Navigation: Once paired, audio prompts from your GPS will be routed to the headset.

3. Customizing with Optional Pattern Shells

The Lexin G1 comes with optional decorative shells in various colors. To change the shell, carefully detach the current shell and snap on your preferred color to match your helmet or personal style.

Maintenance

To ensure the longevity and optimal performance of your Lexin G1 headset, follow these maintenance guidelines:

• Cleaning: Use a soft, damp cloth to clean the exterior of the headset. Avoid using harsh chemicals or abrasive cleaners.
• Water Resistance: The Lexin G1 is IP67 waterproof, making it suitable for rainy and harsh environments. However, avoid submerging the device in water for extended periods. Ensure the USB-C port cover is securely closed when not charging.
• Battery Care: Charge the battery regularly, even if the device is not in use for extended periods, to maintain battery health. Store the device in a cool, dry place.
• Storage: When not in use, store the headset in a protective case to prevent scratches or damage.

Troubleshooting

• No Intercom Functionality: Please note that the Lexin G1 model does NOT support intercom communication with other riders or devices (including Lexin BF4, FT4 Pro, or G2P models), as indicated in its specifications. It is designed for single-user audio and phone calls.
• Difficulty Pairing: Ensure the headset is in pairing mode (rapidly flashing LED). Turn off and on your device's Bluetooth, then try pairing again. Make sure the headset is charged.
• Poor Sound Quality / Noise: The Lexin G1 features CVC/DSP Noise Reduction for clear audio. Ensure speakers are positioned correctly over your ears and the microphone is close to your mouth. Check for any obstructions or loose connections.
• Short Battery Life: Ensure the device is fully charged before use. Battery life can vary based on usage (e.g., continuous music playback vs. standby). If battery life significantly degrades, contact support.
• No Audio from GPS: Confirm that your GPS device is successfully paired with the Lexin G1 and that its audio output is set to Bluetooth.

User Tips

• Easy Operation: The Lexin G1 features large, glove-friendly buttons, making it easy to control functions even while wearing riding gloves.
• Personalization: Utilize the optional pattern shells to customize your headset's appearance and match it with your helmet or gear.
• Optimal Audio: For the best sound and voice clarity, ensure your speakers are aligned with your ears and the microphone is positioned correctly.
• Hands-Free Convenience: Take full advantage of the voice assistant feature (Siri or S-voice) for hands-free control of your smartphone functions while riding.
• Helmet Compatibility: The universal design and mounting options ensure compatibility with a wide range of helmet types, including articulated (flip-up) helmets.

Warranty and Support

Lexin products are manufactured to high-quality standards. For warranty claims, technical assistance, or any questions not covered in this manual, please contact Lexin customer support. Keep your proof of purchase for warranty service.