1. Introduction
This manual provides instructions for the AXD7715 replacement remote control. This remote is designed to function as a direct replacement for your original Pioneer AV Receiver remote, offering seamless control without the need for complex setup or programming. It features an upgraded chip for stable performance, soft buttons for comfortable use, and an ergonomic design.
Compatible Pioneer AV Receiver Models:
- X-SMC11
- X-SMC22
- X-HM50-S
- X-HM51-S
- X-SMC11-S
- X-SMC12-S
- X-SMC22-S

Figure 1: AXD7715 Remote Control Overview
2. Specifications
| Feature | Description |
|---|---|
| Model Number | AXD7715 |
| Wireless Communication | Infrared (IR) |
| Intended Use | Audio / Video Players (Pioneer AV Receivers) |
| Operating Range | Up to 32 feet (approximately 10 meters) |
| Response Time | 0.2 seconds |
| Material | High-quality ABS |
| Power Source | 2 x AA/R6/LR6 Batteries (Not Included) |
| High-Concerned Chemical | None |
3. Package Contents
- 1 x AXD7715 Remote Control
Note: Batteries are not included and must be purchased separately.
4. Setup
The AXD7715 remote control is designed for immediate use with compatible Pioneer AV Receivers without any pairing or programming. Simply install the batteries, and it's ready to operate.
4.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two (2) AA/R6/LR6 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.

Figure 2: Battery Compartment
Once batteries are installed, the remote is ready to control your compatible Pioneer AV Receiver.

Figure 3: Direct Use - No Pairing Required
5. Operating Instructions
The AXD7715 remote control provides full functionality for your Pioneer AV Receiver. Point the remote directly at your receiver and press the desired function button.
5.1 Key Functions

Figure 4: Remote Control Features
- STANDBY/ON: Powers the receiver on or off.
- CD, USB, TUNER, iPod, BT AUDIO, AUDIO IN: Selects the corresponding input source.
- TIMER, SLEEP: Activates timer or sleep functions.
- Number Buttons (0-9): Used for direct track selection, channel tuning, or inputting numerical values.
- EQUALIZER, P.BASS, BASS/TREBLE: Adjusts audio equalization and bass settings.
- CLEAR, REPEAT, RANDOM: Controls playback options for media.
- DISPLAY, TUNE+, TUNE-, FOLDER: Navigates display options, tunes radio frequencies, or browses folders.
- Navigation (Up, Down, Left, Right, ENTER): Used for menu navigation and selection.
- MENU, MEMORY/PROGRAM: Accesses system menus or programming functions.
- PRESET+, PRESET-: Navigates through preset radio stations.
- VOLUME+, VOLUME-: Adjusts the master volume level.
- MUTE: Mutes or unmutes the audio output.
- DIMMER: Adjusts the brightness of the receiver's display.
- Playback Controls (Rewind, Play/Pause, Fast Forward): Controls media playback.
- ST/MONO, RDS/ASPM, PTY, DISPLAY, OPTION: Accesses various radio and display options.
Ensure a clear line of sight between the remote control and the AV receiver for optimal performance. The remote offers a long-distance control range of up to 32 feet with a rapid 0.2-second response time.

Figure 5: Long-Distance Control
6. User Tips
- For best performance, use high-quality alkaline batteries.
- Replace both batteries at the same time to ensure consistent power.
- Keep the remote control pointed directly at the AV receiver for reliable signal transmission.
- Avoid placing obstacles between the remote and the receiver.
7. Troubleshooting
If you experience issues with your AXD7715 remote control, please refer to the following common troubleshooting steps:
- Remote not responding:
- Check if the batteries are inserted correctly with the proper polarity.
- Replace old or depleted batteries with new ones.
- Ensure there are no obstructions between the remote control and the AV receiver's IR sensor.
- Verify that the remote is pointed directly at the receiver.
- Specific functions not working:
- Confirm that your Pioneer AV Receiver model is listed in the "Compatible Models" section. This remote is a direct replacement and does not require programming, but it must be compatible with your specific receiver model.
- If you are unsure about compatibility, please compare your original remote with images of the AXD7715.
If problems persist after following these steps, please contact the seller for further assistance.
8. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- Battery Replacement: Replace batteries promptly when the remote's performance degrades. Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Storage: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Avoid Drops: While made from durable ABS material, avoid dropping the remote control to prevent internal damage.
9. Warranty and Support
For any questions regarding compatibility, functionality, or troubleshooting that cannot be resolved using this manual, please contact the seller directly. When contacting support, it is helpful to provide your Pioneer AV Receiver model number and a description of the issue.
This remote control is designed as a high-quality replacement. Please ensure your original remote matches the AXD7715 for guaranteed compatibility.