1. Introduction
Thank you for choosing the DSPIAE Stepless Circular Cutter. This precision tool is designed for modelers and hobbyists to achieve accurate circular cuts in various materials. The advanced kit (MT-C) offers stepless adjustment for a wide range of diameters, while the optional locator (MT-CL) provides enhanced positioning for repetitive tasks. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Product Features
- Precision Cutting: Designed for quick and accurate cutting of masking tape or plastic sheets under 0.4mm thickness. Ideal for circular shaped part detailing and masking jobs.
- Stepless Adjustment: Allows for fine-tuned diameter settings.
- Wide Diameter Range: Capable of cutting discs with a radius from 1mm up to 45mm diameter.
- Premium Construction: The advanced circular cutter kit utilizes an aluminum alloy forging process and 440 stainless steel ball bearings for guaranteed precision and durability.
- Locator Compatibility: The MT-CL locator is specifically designed to assist the advanced circular cutter with repeated positioning.



3. Package Contents
Please verify that all items are present in your package:
Stepless Circular Cutter - Advanced Kit (MT-C)
- Stepless Circular Cutter-Advanced Kit: x1
- ABS Storage Case With Magnetic Lock: x1
- Silicon Anti Slip Pad: x1
- 30° Tungsten Carbide Cutting Bit: x1
- 45° Tungsten Carbide Cutting Bit: x1
- 60° Tungsten Carbide Cutting Bit: x1
- Allen Hex Key: x3
MT-CL Locator
- Aluminium Alignment Block: x1
- Acrylic Locator Piece: x1
- Silicon Anti Slip Pad: x1

4. Safety Information
WARNING: Be careful not to put it in your mouth, causing suffocation risk.
- Keep out of reach of children under 14 years of age.
- Read instructions carefully before use to avoid possible injury caused by improper use.
- DO NOT use this cutter on metal sheets or plastic sheets thicker than 0.4mm.
- The locator is available separately and is only compatible with the advanced circular cutter kit.
- Do not drop or tap this product as it may cause damage or malfunction.
5. Setup
5.1 Blade Installation
- Carefully remove a cutting bit from its packaging.
- Loosen the small screw on the cutter arm using one of the provided Allen Hex Keys.
- Insert the cutting bit into the designated slot on the cutter arm, ensuring it is securely seated.
- Tighten the screw to hold the blade firmly in place. Ensure the blade is oriented correctly for cutting.
5.2 Attaching Anti-Slip Pads
Before first time use, attach the provided silicon anti-slip pads to the bottom of the circular cutter and the locator (if using) to prevent movement during operation.
6. Operation
6.1 Setting the Cutting Diameter
- Place the circular cutter on a flat, stable surface.
- Adjust the cutter arm to the desired radius using the scale. The radius scale indicates disc diameters from 1mm up to 45mm.
- Secure the cutter arm in place once the desired diameter is set.


6.2 Using the MT-CL Locator (Optional)
The MT-CL locator is designed for repeated, precise positioning of the circular cutter.
- Determine Position: Mark the center position of the disc to be cut out on your material.
- Position Locator: Place the MT-CL locator over the determined position. Use the circular engravings on the acrylic piece as a reference for the desired disc size. Ensure anti-slip pads are attached to the locator for stability.
- Align Cutter: Carefully remove the locator with caution, ensuring the aluminum alignment block remains untouched. Align the circular cutter using the corner without screws against the alignment block.
- Start Cutting: Once aligned, firmly hold the cutter and rotate it to begin cutting the circular disc. Apply even pressure for a clean cut.

7. Maintenance
- The Advanced Kit (MT-C) is designed to be maintenance-free.
- Keep the cutting bits clean and free from debris. Replace dull or damaged blades promptly to ensure optimal cutting performance and prevent damage to materials.
- Store the cutter and its accessories in the provided ABS storage case to protect them from dust and physical damage.
- Avoid exposing the tool to excessive moisture or extreme temperatures.
8. Troubleshooting
- Uneven Cuts: Ensure the material is flat and securely held. Verify the blade is sharp and properly installed. Check that the anti-slip pads are in place and effective.
- Cutter Not Moving Smoothly: Check for any debris obstructing the movement of the cutter arm. Ensure all screws are tightened appropriately, but not excessively.
- Difficulty Cutting: Confirm the material thickness is within the recommended 0.4mm limit. Replace the cutting bit if it is dull.
9. Specifications
| Attribute | Stepless Circular Cutter - Advanced Kit (MT-C) | Stepless Circular Cutter - Locator (MT-CL) |
|---|---|---|
| Product Name | Stepless Circular Cutter-Advanced Kit | Stepless Circular Cutter-Locator |
| Model | MT-C | MT-CL |
| Measurement | 95*95*26mm | 75*75*8mm |
| Construction | Aluminium Alloy, 440 High Grade Stainless Steel | Aluminium Alloy, Acrylic |
| Weight | 315g ± 3g | 87g ± 3g |
| Cutting Class | Knives | N/A |
| Recommended Age | 14+y | 14+y |

10. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for precision cutting tools include:
- Always use a cutting mat to protect your work surface and prolong blade life.
- For very small or delicate cuts, make multiple light passes instead of one deep cut.
- Practice on scrap material before cutting your final piece.
- Ensure your material is clean and free of dust or oils for the best adhesion of masking tape and clean cuts.
11. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.