1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Sunon PE50 Quartz Watch Movement. Designed for DIY enthusiasts and professional watchmakers, this movement offers reliable timekeeping with chronograph, date, and 24-hour functionalities. Please read this manual thoroughly before attempting any assembly or repair.
2. Specifications
| Feature | Specification |
|---|---|
| Model | PE50 |
| Type | Quartz Movement |
| Diameter (Size) | Φ29.75mm |
| Height | 4.52mm |
| Accuracy | ±45 seconds per month |
| Functions | Chrono Minute, Chrono Second, 24 Hour, Date |
| Recommended Uses | Disassembly and assembly, Watch Repair & Kits |
| Battery Type | SR920SW (not included) |
| Weight | 0.02 kg |
| Origin | Mainland China |
3. Components Overview
The Sunon PE50 movement features a robust design with integrated chronograph and date functions. Familiarize yourself with the key components before installation.



4. Setup and Installation
This section outlines the steps for installing the PE50 movement into a watch case and preparing it for use. It is recommended to perform these steps in a clean, dust-free environment using appropriate watchmaking tools.
4.1. Battery Installation
- Locate the battery compartment on the rear of the movement (refer to Figure 3).
- Carefully insert an SR920SW battery, ensuring correct polarity (+ side up).
- Secure the battery cover or clamp if present.
4.2. Stem Insertion
- Identify the stem release button or lever on the movement (refer to Figure 3).
- Gently press the release mechanism while inserting the stem into its opening.
- Ensure the stem clicks securely into place. Do not force the stem.
4.3. Hand Alignment
Before casing the movement, attach the watch hands (hour, minute, second, chronograph hands) and ensure they are properly aligned. The chronograph hands should reset precisely to zero.
4.4. Casing the Movement
- Place the movement into the watch case, ensuring it sits correctly within the movement holder.
- Secure the movement with any retaining screws or clamps provided by the watch case.
- Carefully close the watch case back.
5. Operating Instructions
The PE50 movement offers standard timekeeping, date, and chronograph functions. The crown typically has multiple positions for setting.

5.1. Setting Time
- Pull the crown out to the outermost position (Position 2).
- Turn the crown to adjust the hour and minute hands.
- Push the crown back to Position 0 to start the watch.
5.2. Setting Date
- Pull the crown out to the first position (Position 1).
- Turn the crown (usually clockwise or counter-clockwise, depending on the movement) to adjust the date.
- Avoid setting the date between 9 PM and 3 AM, as this can damage the date mechanism.
- Push the crown back to Position 0.
5.3. Using the Chronograph
The chronograph function allows for precise timing of events.
- Start/Stop: Press the top pusher to start the chronograph. Press it again to stop.
- Reset: With the chronograph stopped, press the bottom pusher to reset all chronograph hands to zero.
5.4. 24-Hour Sub-dial
The 24-hour sub-dial typically synchronizes with the main hour hand, indicating the current time in a 24-hour format (e.g., 1 PM is 13:00). It cannot be set independently.
6. Maintenance
Proper maintenance ensures the longevity and accuracy of your Sunon PE50 movement.
6.1. Battery Replacement
When the watch stops or the second hand starts skipping (low battery indicator), it's time to replace the battery. Use an SR920SW battery. Refer to Section 4.1 for installation steps. It is recommended to have this done by a qualified watch technician to avoid damaging the movement.

6.2. General Care
- Avoid exposing the watch to extreme temperatures, strong magnetic fields, or severe shocks.
- Keep the watch clean and dry. If the watch is water-resistant, ensure the crown is always pushed in to maintain its seal.
- For professional cleaning or servicing, consult a qualified watchmaker.
7. Troubleshooting
If you encounter issues with your PE50 movement, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Dead or improperly installed battery | Check battery polarity or replace with a new SR920SW battery. |
| Inaccurate timekeeping | Low battery, exposure to magnetic fields, or internal issue | Replace battery. Demagnetize the watch. If problem persists, consult a watch technician. |
| Chronograph hands not resetting to zero or not moving | Misalignment, internal obstruction, or malfunction | Ensure hands are properly aligned during installation. If the issue is internal, professional repair is needed. |
| Stem is loose or broken | Improper insertion or excessive force | If the stem is broken, it needs to be replaced. If loose, ensure it's correctly seated in the release mechanism. Handle with care. |
| Date not changing | Incorrect setting time, or internal issue | Avoid setting date between 9 PM and 3 AM. If the mechanism is stuck, professional repair may be required. |
8. User Tips
- Packaging: The movement typically comes well-protected in a small box for storage, often including a stem.
- Battery: Be aware that the movement usually does not include a battery. Ensure you have an SR920SW battery ready for installation.
- Reliability: The Sunon PE50 is known for its reliability and crisp chronograph action, making it a popular choice for budget watches and DIY projects.
- Compatibility: This movement is often used as a compatible alternative for certain chronograph watches, including replicas that originally used movements like the ETA G10.211e. Always verify dimensions and hand sizes for your specific project.
- Handling: Exercise caution when inserting or removing the stem to prevent breakage.
9. Frequently Asked Questions (FAQ)
- Q: What type of battery does the Sunon PE50 movement use?
- A: The Sunon PE50 movement uses an SR920SW battery.
- Q: Is this movement compatible with my watch model?
- A: Compatibility depends on the specific watch case and hand sizes. Please compare the dimensions (Φ29.75mm diameter, 4.52mm height) and functions of the PE50 movement with your watch's requirements. It is known to be compatible with some watches designed for ETA G10.211e movements.
- Q: My chronograph second hand is not working correctly.
- A: This could be due to misalignment during installation or an internal issue. Ensure the hands were properly seated. If the problem persists, it may require inspection by a professional watch technician.
10. Warranty and Support
For any issues not covered in this manual or for professional assistance, please contact the seller or a qualified watch repair service. Keep your purchase records for any warranty claims.