CUI INC ATS065T-P240 / SDI65-24-U

Contents

CUI INC 24V 2.71A 65W AC Adapter User Manual

Model: ATS065T-P240 / SDI65-24-U

1. Introduction

This manual provides essential information for the safe and efficient use of your CUI INC 24V 2.71A 65W AC Adapter. Please read this manual thoroughly before using the product and retain it for future reference.

CUI INC 24V 2.71A 65W AC Adapter with 3-pin circular DC connector
Figure 1: CUI INC 24V 2.71A 65W AC Adapter

This image displays the CUI INC AC adapter, highlighting its compact design and the specific 3-pin circular DC output connector.

2. Safety Information

WARNING: To reduce the risk of fire or electric shock, carefully follow these instructions.

  • This AC adapter is designed for indoor use only. Do not expose to rain, moisture, or extreme temperatures.
  • Ensure the power outlet voltage is within the specified input range (100-240V AC).
  • Do not disassemble or modify the adapter. Refer all servicing to qualified service personnel.
  • Avoid placing the adapter in areas with poor ventilation or near heat sources.
  • Keep out of reach of children.
  • Disconnect the adapter from the power outlet when not in use for extended periods.
Back label of CUI INC AC adapter showing specifications and safety warnings
Figure 2: Adapter Label with Safety Markings

The product label indicates "FOR INDOOR USE ONLY" and other regulatory compliance marks (CE, FC, GS, UL Listed, JET CUI Japan, LPS).

3. Package Contents

Please check the package for the following items:

  • 1 x CUI INC 24V 2.71A 65W AC Adapter
  • 1 x Power Cable (AC input cable, type may vary by region)

4. Specifications

FeatureDetail
Brand NameCUI INC (XRUITn)
Model NumbersATS065T-P240, SDI65-24-U, SDI65-24-UC-ST-C2
Input100-240V AC, 50-60Hz
Output24V DC, 2.71A
Power65W
DC Plug Type3-pin circular connector (as shown in Figure 1)
Connection TypeDesktop
CertificationsCE, EAC, EPA, FCC, UL
Protection FeaturesOverload, Short Circuit, Over Temperature, Over Charging, Over Discharging
Package Dimensions (L x W x H)12 cm x 8 cm x 6 cm
Package Weight0.7 kg
Warranty12 Months

5. Setup Instructions

  1. Connect the AC Power Cable: Take the provided AC power cable and connect one end to the AC input port on the adapter.
  2. Connect to Power Outlet: Plug the other end of the AC power cable into a standard wall power outlet (100-240V AC).
  3. Connect to Device: Connect the 3-pin circular DC output connector of the adapter to the corresponding power input port on your device. Ensure a secure connection.
  4. Verify Power: Once connected, the adapter should provide power to your device. Some adapters may have an indicator light to show power status.
Various regional AC power cables including US, EU, UK, AU, BZ types
Figure 3: Regional AC Power Cables

This image illustrates different types of AC power cables (US, EU, AU, BZ, UK) that may be supplied with the adapter, depending on your region.

6. Operation

The CUI INC AC Adapter is designed for continuous operation to power compatible electronic devices requiring 24V DC at up to 2.71A. Once properly connected, it will automatically supply the necessary power. No user interaction is typically required during operation.

7. Maintenance

  • Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
  • Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cables to prevent damage.
  • Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use and replace the adapter.

8. Troubleshooting

ProblemPossible CauseSolution
Device not receiving power
  • Adapter not plugged into wall outlet
  • Wall outlet is not active
  • Loose connection between adapter and device
  • Incorrect adapter for device
  • Damaged adapter or cable
  • Ensure adapter is securely plugged into a live wall outlet.
  • Test the wall outlet with another device.
  • Check all connections for tightness.
  • Verify device power requirements match adapter specifications (24V DC, 2.71A).
  • Inspect adapter and cables for damage. Replace if damaged.
Adapter feels excessively hot
  • Poor ventilation
  • Overload (device drawing too much power)
  • Ensure adapter is in a well-ventilated area, not covered.
  • Verify device power requirements do not exceed 65W (24V * 2.71A). Disconnect if overheating persists.

9. Quality Assurance Testing

The CUI INC AC Adapter undergoes rigorous testing to ensure reliability and safety. This includes power output stability, short circuit protection, ripple data analysis, and high-pressure resistance tests.

Video 1: Power Adapter Testing Process

This video demonstrates various quality assurance tests performed on the power adapter, including bare board power tests, short circuit tests, ripple data analysis, and high-pressure resistance tests, ensuring product reliability and safety.

10. User Tips

  • Always ensure the adapter's output voltage and current match or exceed the requirements of your device to prevent damage.
  • Use the correct regional power cable for your location to ensure safe and proper connection to the mains supply.
  • For optimal performance and longevity, avoid bending or crimping the adapter cables excessively.

11. Warranty and Support

Warranty Information

This CUI INC AC Adapter comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

Additional Resources

For a more detailed user manual and additional documentation, please refer to the official PDF document available at: CUI INC AC Adapter User Manual (PDF)

For technical support or further inquiries, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.