Introduction
This manual provides instructions for the installation, operation, and troubleshooting of your Herdio Universal Marine Bluetooth Audio Receiver. This compact device allows you to stream audio wirelessly via Bluetooth or through an auxiliary input to passive speakers, suitable for various environments including home, marine, and ceiling installations.
Video: A brief demonstration of the Herdio Bluetooth Amplifier Box and its connections.
Package Contents
Please check the package for the following items:
- Bluetooth Dongle (AMP-BTX01)
- Adhesive Backing Tape
- 2pcs non-corrosive screws
- 12V 3A Power Supply (with appropriate plug for your region: EU/US/UK/AU)
- Screwdriver
Technical Specifications
| Feature | Specification |
|---|---|
| Model No. | BT-01 (AMP-BTX01) |
| Bluetooth Version | V5.3 (Note: Some documentation may refer to V4.0, but V5.3 is the current specification) |
| Bluetooth Profiles | A2DP |
| Operating Distance | Typically 10m / 33ft (up to 50 feet in optimal conditions) |
| Operating Voltage | +12V~24V DC |
| Operating Current | 20mA |
| Weight | 96g / 3.386oz |
| Dimensions | 42mm x 44mm x 22mm / 1.65inch x 1.73inch x 0.87inch |
| Number of Channels | 2 (2.0 Stereo) |
| Maximum Power Per Channel | 6W (30W Peak Power for 2 speakers combined) |
| Output Power | 40W (Total) |
| Control Method | Push button (TWS switch) |
| Material | Plastic |
| Certifications | CE, RoHS, WEEE, FCC ID: 2AYZ2-BTX01 |
| Features | Bluetooth/Aux, TWS Functionality |
Safety and Compliance (FCC Requirement)
FCC ID: 2AYZ2-BTX01
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Setup Instructions
Mounting the Bluetooth Dongle
The Bluetooth Dongle can be secured using either the provided adhesive backing tape or the non-corrosive screws. Ensure the mounting surface is flat, clean, and dry before applying the adhesive tape. If using screws, tighten them carefully to avoid distorting the Bluetooth Dongle.
Bluetooth Receiver Wiring Instructions
Follow these steps to wire your Bluetooth amplifier:
- Red Wire (B+): Connect to the positive terminal of the power supply.
- Black Wire (GND): Connect to the negative terminal of the power supply.
- Blue Wire (ACC/REM OUT):
- Priority connection: Attach to the REM (Remote) interface of the device.
- Alternative: If no REM interface is available, connect to the ACC (Accessory) interface of the ignition wire.
- RCA (3.5mm) Audio Output (Amp): Connect to your amplifier's audio input.
Notes:
- Ensure all connections comply with local electrical safety standards.
- Verify polarity to avoid reverse connection damage.
- The Bluetooth amplifier must be installed in a dry location, such as a loft space.
Operating Instructions
Pairing with a Bluetooth Device
- Ensure your stereo system is turned on and the Bluetooth Dongle is powered on.
- Switch the Audio Source Mode on your stereo system to AUX IN or Line IN.
- On your mobile device, turn on Bluetooth and search for "BT-01" (or "Herdio", "HCSXXX", "HMSXXX", "Hosxxx" as seen in some descriptions) and select it to pair. No password is required.
- You will hear a confirmation tone indicating a successful connection. The Bluetooth Dongle is now ready to receive and output music to your connected sound system.
Note:
- To pair with a different device, you must repower the Bluetooth Dongle.
- The Bluetooth Dongle enters searching mode when it is powered off and on.
- All music selection and playback are controlled from your mobile device.
- The unit is compatible with Amazon products like Alexa and Echo.
TWS (True Wireless Stereo) Function
The TWS function allows you to pair two Herdio amplifiers for a powerful true stereo surround sound experience, connecting up to 4 speakers (2 per amplifier). This is ideal for creating a wider soundstage.
To use TWS:
- Ensure both amplifiers are powered on.
- Locate the TWS switch on each amplifier.
- Turn on the TWS switch on both amplifiers before pairing them with your Bluetooth device.
- Once paired, the two amplifiers will work together to provide a stereo sound experience.
Troubleshooting
| Problem | Cause | Solution |
|---|---|---|
| No power | 1. Incorrect wiring 2. Fuse is blown |
Check wiring Replace fuse |
| No sound | 1. Volume is too low 2. Connection is loose |
Increase volume Double check connection |
| Unstable Bluetooth connection | Device out of range or interference | Ensure device is within 33-50 feet of the amplifier. Reduce obstacles or sources of interference. |
User Tips
- The amplifier provides a few watts of power per channel (6W max per channel, 30W peak for 2 speakers), which is suitable for low-noise environments. Do not expect high-power output for large spaces or very demanding speakers (e.g., not suitable for 60W car speakers).
- Installation is generally straightforward and easy.
- This device is a Bluetooth receiver, meaning it receives audio signals from your phone/device and sends them to speakers. It cannot transmit audio to other Bluetooth devices.
- For optimal Bluetooth stability, keep your connected device within the recommended operating distance of 33-50 feet and minimize physical obstructions.
- The amplifier is designed for passive speakers only, not active speakers.
Maintenance
To ensure the longevity and optimal performance of your Herdio Bluetooth Audio Receiver, follow these simple maintenance guidelines:
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure the amplifier is installed in a dry location to prevent moisture damage.
- Regularly check all wiring connections to ensure they are secure and free from corrosion.
- Avoid placing the device in direct sunlight or near heat sources, as this can affect its performance and lifespan.
Warranty and Support
All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions, please feel free to send your messages to their mailbox: support@herdiotech.com
For more detailed information about the product, please visit www.Herdiotech.com
A user manual (PDF) is also available for download. Reference: Herdio User Manual (PDF)