Phonak Baseo Q15 UP

Contents

Phonak Baseo Q15 UP Digital Hearing Aid User Manual

Model: Baseo Q15 UP (12 Channels)

1. Welcome

Your new Phonak Baseo Q15 UP hearing aid is a premium quality product designed to provide advanced digital hearing technology. To ensure you benefit fully from its capabilities and enjoy many years of use, please read these instructions thoroughly.

For any questions, consult your hearing care professional.

Video: Overview of the Phonak Baseo Hearing Aid.

2. Important Safety Information

Please read all safety information before using your hearing aid.

General Warnings

  • A hearing aid will not restore normal hearing or prevent/improve hearing impairment from organic conditions. It is part of hearing habilitation and may require supplementary auditory training.
  • Hearing aids are intended to amplify sound for the user's impaired hearing only. Do not allow others to use your device.
  • Do not modify the hearing aid without Phonak's explicit approval.
  • Do not use in explosive areas (mines, industrial areas with explosion risk).
  • Hearing aid batteries are toxic if swallowed. Keep out of reach of children and pets. Consult a physician immediately if swallowed.
  • If you experience pain, inflammation, skin irritation, or excessive ear wax, consult your hearing care professional or physician.
  • In rare cases, the dome may remain in the ear canal upon removal. If this occurs, consult a physician for safe removal.
  • Directional microphone mode reduces background noise, but be aware that warning signals or noises from behind (e.g., cars) may be suppressed.
  • The hearing aid contains small parts that can cause choking. Keep out of reach of children and pets.
  • Only connect external devices tested according to IECXXXXX standards. Use only Phonak AG approved accessories.
  • If you have active implantable medical devices (pacemakers, defibrillators): keep magnets (battery tools) at least 15 cm (6 inches) away. Do not use wireless accessories; consult your hearing care professional.

Product Safety Information

  • Phonak hearing aids are water resistant, not waterproof. Avoid immersion in water. Remove before swimming or bathing.
  • Never wash microphone inputs, as this can damage acoustic features.
  • Protect from heat; do not leave near windows, in cars, or use microwaves/heating devices for drying. Consult your hearing care professional for suitable drying methods.
  • When not in use, leave the battery compartment open to allow moisture to evaporate. Store in a safe, dry, clean place.
  • Do not drop the hearing aid on hard surfaces.
  • Always use new batteries. Replace leaking batteries immediately to avoid skin irritation. Return used batteries to your hearing care professional.
  • Use only 1.5 Volt batteries. Do not use silver-zinc or Li-ion rechargeable batteries, as they can cause severe damage.
  • Remove the battery if not using the hearing aid for an extended period.
  • Remove hearing aids before X-ray or MRI/NMRI scans. They do not need to be removed for security gates (airports).
  • Do not use in areas where electronic equipment is prohibited.

3. Product Overview

The Phonak Baseo Q15 UP is a 12-channel digital hearing aid designed for very severe hearing loss, with a fitting range of up to 120dB. It features an intelligent chip for multi-band noise reduction and sound processing.

Phonak Baseo Q15 UP Hearing Aid Components and Wearing Steps

Image: Labeled components of the Phonak Baseo Q15 UP hearing aid and steps for correct wear. Components include Dual microphone port, Program button, Volume button, Battery compartments, and Ear hook.

Key Features

  • 12 Channels: Provides precise sound processing for various listening environments.
  • Fixed Directional Microphone: Enhances speech understanding in noisy environments by reducing disturbing noises from the back. Can be manually activated.
  • WhistleBlock: An efficient feedback canceller that distinguishes between feedback and natural signals, providing up to 20 dB added stable gain without whistling.
  • Programmable: Can be programmed to your specific audiogram for optimal performance.

Components

  • Dual Microphone Port: Captures sound from the environment.
  • Program Button: Changes hearing programs.
  • Volume Button: Adjusts the sound level.
  • Battery Compartments: Holds the battery.
  • Ear Hook: Connects to the hearing tube and earmold/dome.
  • Right/Left Indicator: Red for right ear, Blue for left ear.

Battery Information

The Phonak Baseo Q15 UP uses Zinc Air Battery Size 13 (orange).

ModelBattery Size (marking on package)IEC CodeANSI Code
Q15 UP13 (orange)PR487000ZD

4. Setup Instructions

4.1. Battery Preparation

  1. Remove the protective foil from the new battery.
  2. Wait for two minutes before inserting the battery to activate it fully.

4.2. Inserting the Battery

  1. Hold the hearing aid and open the battery door.
  2. Insert the battery so that the '+' symbol on the battery is visible.

4.3. Turning On the Hearing Aid

  1. Switch on the hearing aid by gently closing the battery compartment.
  2. Open and close the battery compartment carefully.
  3. Ensure the battery is correctly inserted and there is no resistance when closing the compartment. Incorrect insertion can damage the device.
  4. The hearing aid will start after a few seconds, indicated by an acoustic signal.

4.4. Identifying Right and Left Hearing Aids

Each hearing aid is individually programmed for your right or left ear. Identify them by the color indicator:

  • Red: Right ear
  • Blue: Left ear

4.5. Inserting the Hearing Aid (Classic Earmold)

  1. Ensure the earmold tube is correctly slided over the hearing aid hook.
  2. Hold the earmold (for the correct ear) between your thumb and forefinger.
  3. Place the ear canal part of the earmold into your ear canal.
  4. Position the hearing aid behind your ear.
  5. Insert the upper part of the earmold into the upper part of the bowl of your ear.
  6. If needed, gently pull your earlobe downwards to open the ear canal and rotate the earmold until it fits correctly.
  7. Check the fit by running your finger over the bowl of the ear; you should feel the contour of your ear, not the hearing aid.

4.6. Inserting the Hearing Aid (Dome)

  1. Ensure the dome is correctly attached to the tube (dome length completely over the tube).
  2. Place the hearing aid (for the correct ear) behind your ear.
  3. Hold the hearing tube between your thumb and forefinger.
  4. Insert the dome deep enough into the ear canal so the hearing tube lies flat on your ear.
  5. If your hearing aid has a retention cord, press it into the bowl of the ear to retain the dome.
  6. If needed, gently pull your earlobe downwards to open the ear canal and rotate the dome until it fits correctly.

5. Operating Instructions

5.1. Adjusting the Volume

  • To increase volume: Press the volume control upwards.
  • To decrease volume: Press the volume control downwards.
  • Use your thumb to lightly support the hearing aid while adjusting.

5.2. Selecting a Hearing Program

  • Press the program button to select or change a hearing program.
  • Each press changes to the next program, indicated by an acoustic signal.

5.3. Turning Off the Hearing Aid

You can turn off your hearing aid by opening the battery compartment.

5.4. Changing the Battery

Your hearing aid will indicate a low battery with a double beep. You typically have up to 30 minutes to change the battery, but this can vary. Always keep a spare battery on hand.

6. Maintenance

Diligent and routine care ensures outstanding performance and a long service life for your hearing aid.

General Information

  • Remove your hearing aid before using hair spray or applying cosmetics, as these products can cause damage.
  • Never wash or clean the microphone inputs.

Daily Care

  • Inspect the earmold (dome or SlimTip) and tube for earwax and moisture.
  • Clean surfaces with a lint-free cloth.
  • Do not use household detergents, soap, or rinse parts with water. For intensive cleaning, consult your hearing care professional for advice on filters or drying capsules.

Weekly Care

  • Clean the earmold (dome or SlimTip) with a soft, damp cloth or a special hearing aid cleaning cloth.
  • For in-depth maintenance, consult your hearing care professional.

Monthly Care

  • Inspect your hearing tube for color changes, hardening, or cracks.
  • Replace the hearing tube if any changes are observed. Consult your hearing care professional.

7. Troubleshooting

Hearing Aids Sound Softer Than Usual / No Sound

  1. Check and adjust volume control.
  2. Inspect hearing tube and earmold for earwax residue; clean if necessary.
  3. Ensure battery is correctly inserted and fitted; adjust if necessary.
  4. Change the battery.
  5. If the problem persists, contact your hearing care professional.

Battery Discharges Too Quickly

  1. Insert a new battery and note its lifespan.
  2. Contact your hearing care professional with this information for assistance.

Crackling or Buzzing Noises

  1. Check hearing tube and earmold for earwax residue.
  2. Inspect hearing tube for damage (color changes, hardening, cracks).
  3. Contact your hearing care professional for replacement if needed.

Whistling

  1. Ensure the earmold is correctly and firmly fitted.
  2. If whistling persists, consult your hearing care professional.

Pain or Inflammation in Your Ear

  1. Remove the hearing aid.
  2. Consult your hearing care professional.
  3. If the problem is serious, contact your physician.

8. Specifications

FeatureSpecification
ModelPhonak Baseo Q15 UP
Channels12
Fitting Range≤120dB
Recommended forVery severe hearing loss
Battery TypeZinc Air Size 13 (orange)
IEC Battery CodePR48
ANSI Battery Code7000ZD
Package Dimensions10 cm (L) x 10 cm (W) x 7 cm (H)
Package Weight0.2 kg
Phonak Baseo Q15 UP Specifications

Image: Phonak Baseo Q15 UP showing 12 channels, fitting range ≤120dB, suitable for very severe hearing loss.

9. User Tips

  • Custom Programming: For optimal performance tailored to your needs, send your audiogram to customer service before shipment so the hearing aid can be programmed to your specific hearing loss.
  • Battery Life: Always carry spare batteries. The low battery warning gives limited time before the hearing aid stops functioning.
  • Comfort and Fit: If you experience discomfort or whistling, ensure the earmold/dome is correctly inserted and fits snugly. Consult your hearing care professional if issues persist.
  • Cleaning: Regular daily cleaning of the earmold/dome is crucial to prevent earwax buildup, which can affect sound quality and device function.

10. Warranty and Support

Local Warranty

Please inquire with your hearing care professional about the terms of the local warranty where you purchased your hearing aid.

International Warranty

Phonak offers a one-year limited international warranty, valid from the date of purchase. This warranty covers manufacturing and material defects in the hearing aid itself. It does not cover accessories such as batteries, tubes, earmolds, or external receivers. Proof of purchase is required for warranty claims.

Warranty Limitations

This warranty does not cover damage from improper handling, care, exposure to chemicals, or undue stress. Damage caused by third parties or non-authorized service centers will void the warranty. Services performed by a hearing care professional in their office are not included.

Compliance Information

This Phonak product meets the requirements of the Medical Devices Directive 93/42/EEC. For full compliance details and an explanation of symbols used on the product and packaging, please refer to the complete user guide PDF available from the seller.

A detailed user manual in PDF format is available for download from the seller's product page or by contacting customer service: View User Manual (PDF)

© 2023 Phonak. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.