Introduction
The ULANZI VL360 38W RGB Handheld Light Wand is a versatile LED video fill light designed for photographers and videographers. It offers full RGB color control, adjustable color temperature from 2500K to 10000K, and 20 preset special effects. With its high power output and detachable barn doors, it provides flexible lighting solutions for various creative scenarios.
Figure 1: ULANZI VL360 RGB Handheld Light Wand
Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid direct eye exposure to the light source, especially at high brightness settings.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Keep out of reach of children.
- Use only the provided or recommended charging cable and power adapter.
Package Contents
Please check the package contents upon opening to ensure all items are present:
- 1 x ULANZI VL360 RGB Light Wand
- 1 x Storage Bag
- 1 x Barn Door
- 1 x User Manual
- 1 x Type-C Charging Cable
Figure 2: Package Contents
Product Overview
The VL360 RGB Light Wand features an intuitive design for ease of use and versatility.
Figure 3: Detailed view of the VL360 controls and features
- Display: For easy parameter setting and monitoring.
- Ergonomic Grip: Designed for comfortable handheld use.
- Lanyard Hole: To prevent accidental dropping.
- 1/4" Screw Hole: For mounting on tripods, light stands, or other supports.
Setup
1. Charging the Battery
The VL360 has a built-in 3400mAh battery. Before first use, fully charge the device.
- Connect the provided Type-C charging cable to the charging port on the light wand.
- Connect the other end of the cable to a compatible PD (Power Delivery) charger (20V 2A recommended).
- The display will indicate charging status. A full charge takes approximately 2 hours.
Note: The device does not support charging while in use.
Figure 4: Battery and Charging
2. Attaching the Barn Door
The detachable barn door helps control light spills and direct the light as intended.
- Align the barn door with the top of the light wand.
- Slide the barn door onto the light wand until it clicks securely into place.
- To remove, gently pull the barn door off.
Figure 5: Detachable Barn Door for Light Shaping
3. Mounting the Light Wand
The VL360 features a standard 1/4" threaded hole at its base for versatile mounting options.
- Attach the light wand to any compatible light stand, desktop tripod, or boom arm using the 1/4" screw hole.
Operating Instructions
1. Power On/Off
Locate the power button on the handle of the light wand. Press and hold to power on or off.
2. Adjusting RGB Full Color (HSI Mode)
The VL360 offers complete RGB control with a versatile HSI (Hue, Saturation, Intensity) color mode.
Figure 6: RGB Full Color HSI Control
- Hue (H): Adjust from 0-359° to select your desired color.
- Saturation (S): Adjust from 0-100 to control the intensity of the color.
- Intensity (I): Adjust from 1-100% for overall brightness.
3. Adjusting Color Temperature and Brightness
Effortlessly adjust between warm and cool tones, and control the overall brightness.
Figure 7: Color Temperature Range (2500K-10000K)
Figure 8: Brightness and Color Compensation
- Color Temperature (CCT): Adjust from 2500K (warm) to 10000K (cool).
- Brightness: Adjust from 0-100% using the controls on the handle.
- Color Compensation: Fine-tune color balance with magenta/green compensation.
4. Using Special FX Modes
The light wand comes with 20 preset lighting scene effects to enhance your creativity.
Figure 9: 20 FX for Unlimited Creativity
Refer to the display and controls to cycle through and select from effects such as Cop Car, Ambulance, Fire Engine, Lightning, Fireworks, TV, Candle, Party, Fault Bulb, Pulsing, Strobe, RGB Strobe, Paparazzi, Emergency, H/L Beam, Red Flash, Green Flash, Blue Flash, HSI Slow, and HSI Fast.
5. Soft Light Sheet (Diffuser)
The light wand includes a removable soft light sheet (diffuser) for different lighting effects. The video demonstrates its use:
Video 1: Product demonstration including soft light sheet removal and barn door attachment.
- To achieve a soft, diffused light, use the light wand with the soft light sheet in place.
- For a harder, more direct light, carefully pull the soft light sheet off the light wand.
Maintenance
1. Cleaning
- Wipe the light wand with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
2. Storage
- Store the light wand in its provided storage bag when not in use to protect it from dust and scratches.
- Keep in a cool, dry place away from direct sunlight.
3. Intelligent Cooling System
The VL360 is equipped with dual fans that automatically activate at 50% brightness or higher to maintain optimal operating temperature and prolong the lifespan of the LEDs.
Figure 10: Intelligent Cooling System
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Low battery or no charge | Charge the light wand fully using the Type-C cable and a compatible PD charger. |
| Light output is weak | Brightness set too low | Increase the brightness percentage using the controls. |
| Incorrect color/effect | Wrong mode or parameter setting | Check the display and adjust HSI values, CCT, or select the desired FX mode. |
| Overheating | Prolonged use at high brightness in a confined space | Ensure proper ventilation. The intelligent cooling system should manage heat, but extreme conditions may require reducing brightness or taking a break. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VL360RGB |
| Lighting Type | RGB Video Light |
| Material | Plastic + Aluminum Alloy Shell |
| Power (Max) | 38W |
| Illuminance (Max) | 5600LX @ 0.3m (with reflector) |
| Lamp Bead | Bi-color + RGB lamp bead |
| CRI | ≥94 |
| Beam Angle | 120° |
| Color Temperature | 2500K-10000K |
| Color Temperature Version | RGB Version |
| Brightness Adjustment Range | 0 - 100% |
| Battery | 14.8V 3400mAh 50.32Wh (Built-in) |
| Charging | Type-C/PD |
| Charging Time | ≈ 2H (20V 2A) |
| Continuous Runtime (Min Brightness) | 5H + |
| Continuous Runtime (Max Brightness) | ≈ 60min |
| Weight (with barn door) | 850g ± 10g |
| Dimensions (with barn door expanded) | 554 * 85 * 52mm |
| Dimensions (with barn door unexpanded) | 554 * 155 * 78mm |
| Power Source | DC (Internal Battery) |
| Battery Included | Yes |
| Inbox Adaptor | No |
| Certification | CE, FCC |
Figure 11: Dimensions Diagram
Figure 12: Detailed Specifications
User Tips
- Single Unit: The product includes one VL360 RGB Light Wand. Some promotional images may show multiple units for demonstration purposes only.
- Versatile Lighting: Experiment with removing the soft light sheet for a harder, more direct light, or keep it on for diffused, soft illumination.
- Creative Effects: Utilize the 20 built-in FX modes to quickly achieve various creative lighting scenarios for your photos and videos.
Warranty and Support
ULANZI offers a 365-day free replacement warranty for quality problems. For any issues or support, please contact the seller directly. The product is sold by VideoGear Store.
For further assistance, please refer to the official Ulanzi website or contact their customer support.
