AXD7692 Replacement Remote Control for Pioneer AV Receivers

1. Introduction

This manual provides detailed instructions for the AXD7692 replacement remote control. This remote is designed to function seamlessly with various Pioneer AV Receiver models, offering a reliable and user-friendly alternative to your original remote.

1.1 Package Contents

• 1 x AXD7692 Remote Control

Note: Batteries are not included.

2. Setup

The AXD7692 remote control is designed for immediate use without complex pairing or programming. Simply install the batteries, and it's ready to operate your compatible Pioneer AV Receiver.

2.1 Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery compartment cover.
3. Insert two (2) AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

2.2 Initial Use

Once batteries are installed, point the remote control directly at your Pioneer AV Receiver. No pairing or setup is required. The remote should function immediately.

3. Operating Instructions

The AXD7692 remote control provides intuitive control over your Pioneer AV Receiver. Its ergonomic design and soft buttons ensure a comfortable user experience.

3.1 Basic Functions

The remote features standard buttons for power, input selection, volume control, channel navigation, and menu access. Refer to the button layout on the remote for specific functions.

3.2 Long-Distance Control

The upgraded smart chip allows for a transmitting distance of up to 32 feet (approximately 9.75 meters) with a rapid 0.2-second response time, ensuring smooth and responsive control from various positions in your room.

3.3 Ergonomic Design and Button Quality

The remote is crafted from high-quality ABS material, featuring soft and comfortable buttons designed for durability, tested to withstand over 120,000 clicks.

4. Maintenance

Proper care and maintenance will extend the life of your remote control.

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface and internal components.
• Battery Care: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your remote control, try the following steps:

• Remote not responding:
  1. Check if the batteries are inserted correctly with the proper polarity.
  2. Replace old batteries with new ones.
  3. Ensure there are no obstructions between the remote control and the AV receiver.
  4. Make sure you are within the effective operating range (up to 32 feet).
• Specific functions not working: Ensure your AV receiver model is listed as compatible. While this remote is a replacement, some advanced functions might vary slightly from the original remote depending on the specific receiver model.

6. Specifications

7. User Tips

• Verify Compatibility: Before purchase or if experiencing issues, always double-check that your Pioneer AV Receiver model is listed among the compatible models. If unsure, comparing your original remote's appearance to the AXD7692 can help confirm compatibility.
• Optimal Performance: For best performance, ensure a clear line of sight between the remote's IR emitter and your AV receiver's IR sensor.
• Comfortable Use: The remote's soft buttons and ergonomic design are intended for comfortable, extended use.

8. Warranty and Support

For any questions, concerns, or issues regarding your AXD7692 remote control, please contact the seller or retailer from whom you purchased the product. They can provide assistance with troubleshooting or replacement if necessary.