SCULPFUN IR-2

Contents

SCULPFUN 1064nm 2W Infrared Laser Module IR-2 User Manual

Model: IR-2 | Brand: SCULPFUN

1. Introduction

This manual provides essential information for the safe and effective use of the SCULPFUN 1064nm 2W Infrared Laser Module IR-2. This module is designed for high-precision engraving on various materials, particularly metals and plastics, when integrated with compatible SCULPFUN laser engravers.

The IR-2 laser module features a 1064nm infrared laser with an ultra-fine 0.03mm laser spot and a pulse energy of up to 20000Hz, making it highly effective for detailed carving.

2. Safety Warnings and Information

Please read all safety information carefully before operating the laser module.

2.1 Fire and Burn Hazard

  • High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials.
  • The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment.
  • After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.

2.2 Mechanical Injury Hazard

  • High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries.
  • Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.

2.3 Electrical Hazard

  • High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet.
  • All electrical connections must comply with local regulations and be performed by qualified electricians.

2.4 Hazardous Substances and Fumes

  • Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust.
  • Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

3. Product Features

  • Engravable Materials: Suitable for a wide variety of metals including gold, silver, platinum, copper, aluminum, zinc, iron, stainless steel, metal oxides and alloys, plastics, and dark acrylics.
  • High Precision: Ultra-fine 0.03mm laser spot for delicate patterns on various metal materials.
  • 20000Hz Pulse Energy: Enables clear and efficient engraving on metals.
  • High Adaptability: Compatible with all SCULPFUN laser engravers, including S6, S6 Pro, S9, S10, S30 Series, S30 Ultra Series, and SF-A9.
  • Mounting Plates: Equipped with 3 different types of mounting plates to suit various machine structures.
  • Quick Focus: Can be quickly focused by pulling down the focus lever.
SCULPFUN IR-2 Infrared Laser Module with specifications and engraving examples
SCULPFUN IR-2 Infrared Laser Module highlighting 1064nm Wavelength, 0.03mm Light Spot, 20KHz Pulse Energy, and engraving capabilities on plastic and metal.
Close-up of laser engraving a dog tag, showing Ultra High Pulse Energy and engravable materials
Illustration of Ultra High Pulse Energy (20000Hz) for clear marks on metal, with examples of engraving on Gold, Silver, Steel, Aluminium, and Brass.
Comparison of 450nm blue laser vs 1064nm infrared laser engraving on plastic and metal
Comparison demonstrating the superior performance of the 1064nm infrared laser over a 450nm blue laser for engraving plastic and zinc alloy electroplating nickel, iron, copper, and aluminium.
Detailed view of the IR-2 laser module emphasizing the 0.03mm ultra-fine spot
Detailed view of the IR-2 laser module, emphasizing the 0.03mm ultra-fine spot for delicate patterns.
Close-up of ultra-fine carving performance on a dog tag
Close-up demonstrating the ultra-fine carving performance on a dog tag, showcasing intricate detail.

4. Package Contents

Verify that all items listed below are included in your package:

  • 1 × 2W Infrared Laser Module
  • 1 × Adapter
  • 1 × S10 Mounting Plate
  • 1 × SF-A9 Mounting Plate
  • 1 × Universal Mounting Plate for Other Models
  • 1 × Accessories Package (includes screws, zip ties, screwdriver, hex keys)
Contents of the SCULPFUN IR-2 laser module package
The complete package contents, including the IR-2 laser module, power adapter, various mounting plates, and an accessories kit.

5. Setup and Installation

5.1 Product Identification and Compatibility

This accessory is compatible with all SCULPFUN-branded machines, including S6, S6 Pro, S9, S10, S30 Series, S30 Ultra Series, and SF-A9.

SCULPFUN engraver frames compatible with the IR-2 module
Examples of compatible SCULPFUN engraver frames (S6/S9/S10/S30/S30 Ultra/A9 series). Note: The engravers are not included in the package.

5.2 Installation Method

This accessory must be installed exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer's "User Manual / Maintenance Manual". Incorrect installation may result in equipment damage, performance degradation, or safety hazards.

5.3 Important Installation Notices

  • For 12V machines: After replacing with the IR-2 24V adapter, you must unplug the air pump to prevent it from burning out.
  • When replacing an original 12V laser head: You need to replace the 24V adapter with a 12V adapter to avoid burning the original laser.
  • If your machine has a structure other than the S10, SF-A9, or universal mounting plate types, please contact SCULPFUN for compatibility confirmation.

6. Operating Procedures

6.1 Preparation

  • Confirm compatibility of the accessory model with your engraver.
  • Ensure the workspace is clean and well-ventilated.

6.2 Power Disconnection

  • Shut down the host machine and unplug it from the main power source.
  • Wait until all components, especially the laser source and spindle motor, are fully cooled.

6.3 Removal of Old Component (if applicable)

  • Refer to the original manufacturer's manual for your engraver.
  • Record wiring connections and mechanical positioning before carefully removing the component to be replaced.

6.4 Installation of New Component

  • Install the new IR-2 accessory in reverse order of removal.
  • Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.

6.5 Calibration

  • After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual for your engraver.

6.6 Testing

  • Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

6.7 Environmental Conditions for Operation

  • Indoor use only.
  • Operating Temperature: 0°C to 40°C.
  • Storage Temperature: -10°C to 50°C.
  • Ingress Protection Rating: IP20 (dust-protected, no water protection).
  • Do not use in damp, dusty, corrosive-gas, or explosive environments.

6.8 Usage Restrictions

This accessory is not designed for industrial continuous-duty operation. Observe the maximum duty cycle specified in the equipment manual of your engraver. Do not use this accessory for any purpose other than its intended design application.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your laser module. Always disconnect power before performing any maintenance.

  • Keep the laser lens clean and free from dust and debris. Use a soft, lint-free cloth and appropriate lens cleaning solution if necessary.
  • Ensure all connections (electrical and mechanical) remain secure. Periodically check for any loose screws or cables.
  • Keep the module's cooling fins clear of obstructions to ensure efficient heat dissipation.
  • Store the module within the specified storage temperature range (-10°C to 50°C) when not in use.

8. Troubleshooting

If you encounter issues with your SCULPFUN IR-2 laser module, consider the following common troubleshooting steps:

  • Module not powering on:
    • Check all power connections and ensure the adapter is correctly plugged in.
    • Verify that the power supply voltage matches the module's requirements (DC24V).
    • Ensure the host engraver is powered on and functioning correctly.
  • Poor engraving quality or no laser output:
    • Check if the laser lens is clean. Dust or debris can obstruct the laser beam.
    • Ensure the module is properly focused. Adjust the focus lever as needed.
    • Verify that the laser power settings in your engraving software are correct for the material being used.
    • Confirm that the module is securely mounted and not vibrating during operation.
  • Overheating:
    • Ensure adequate ventilation around the laser module and the engraver.
    • Check for any obstructions blocking the cooling fins.
    • Confirm that the ambient operating temperature is within the specified range (0°C to 40°C).
  • Compatibility issues:
    • Double-check that your engraver model is listed as compatible.
    • Ensure the correct mounting plate is used and installed properly.
    • If using a 12V machine, confirm the air pump is unplugged when using the 24V adapter for the IR-2 module.

For persistent issues, refer to the comprehensive user manual for your specific SCULPFUN engraver or contact SCULPFUN customer support.

9. Specifications

FeatureSpecification
ModelIR-2
Light Output Power>2W
Product MaterialAluminium Alloy
Laser Wavelength1064nm
Working ModePulse Operation
Spot SizeX:0.03mm Y:0.03mm
Power SupplyDC24V (80W)
Operating Temperature0°C to 40°C
Storage Temperature-10°C to 50°C
Ingress Protection RatingIP20 (dust-protected, no water protection)
Product Size144*50*58mm
Product Weight0.45KG
Package Size295*231*80mm
Package Weight1.5KG
Wireless ConnectivityWi-Fi (Feature of compatible engraver)
Auto LevelingYes (Feature of compatible engraver)
Interface TypeUSB (Feature of compatible engraver)
CE CertificationYes
Voltage110-220V (for compatible engraver, module is 24V)
Engraving Accuracy0.03mm
Data Transmission MethodUSB connection (for compatible engraver)

10. User Tips

  • Material Testing: Always perform small test engravings on new materials to determine optimal power and speed settings before starting a larger project.
  • Ventilation is Key: Ensure your workspace has excellent ventilation, especially when engraving materials that produce fumes or dust.
  • Focus Adjustment: Proper focusing is crucial for achieving the finest detail. Utilize the quick-focus lever for precise adjustments.

11. Frequently Asked Questions (FAQ)

Q: What is the work area measure for this laser module?
A: The work area is determined by the laser engraver machine to which this module is attached, not by the module itself. Please refer to the manual of your specific SCULPFUN engraver for work area dimensions.
Q: Is this module compatible with other brands of laser engravers?
A: The SCULPFUN IR-2 module is designed for high adaptability and is explicitly stated to be compatible with all SCULPFUN laser engravers (S6, S6 Pro, S9, S10, S30 Series, S30 Ultra Series, and SF-A9). Compatibility with other brands is not guaranteed and may require significant modifications or pose safety risks. It is recommended to use it with SCULPFUN machines.

12. Warranty and Support

12.1 Manufacturer Information

Brand: SCULPFUN

Manufacturer Name: Shenzhen SCULPFUN Technology Co., Ltd.

Address: Room 201, Building B, Jinzhicai Factory, No. 1, Guihua Industrial Zone, Guihua Community, Guanlan Street, Longhua District, Shenzhen City, China

EU Responsible Person Information:

  • Name: [AMZ ECREP SL]
  • Address: [Calle Gran Via 49, 7 Deb. Spain]

12.2 Disclaimer

By using this product, the user acknowledges and agrees to the following terms:

The manufacturer and seller shall not be liable for any direct or indirect damages resulting from:

  • Failure to operate, maintain, or store the device in accordance with this manual and all accompanying safety guidelines.
  • Unauthorized modification of the device, or use of non-OEM or incompatible accessories or software.
  • Use of the device outside its intended purpose, or processing of prohibited or unknown materials.
  • Installation, commissioning, or repair performed by personnel not authorized or trained by the manufacturer.
  • Damage caused by force majeure or unforeseen events such as fire, flood, lightning strike, or abnormal voltage.
  • Normal wear and tear (e.g., natural power decay of the laser module over time).

12.3 Additional Resources

A detailed user manual in PDF format is available for download: SCULPFUN IR-2 Laser Module User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.