UGREEN Studio Pro (HP206)

UGREEN Studio Pro Wireless Headphones

Model: HP206

Introduction

Thank you for choosing the UGREEN Studio Pro Wireless Headphones. These headphones are designed to provide an immersive audio experience with advanced features such as 48dB Hybrid Active Noise Cancellation, Hi-Res Audio with LDAC decoding, and an ultra-long battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.

UGREEN Studio Pro Wireless Headphones in black and white
UGREEN Studio Pro Wireless Headphones (Black and White models shown)

Package Contents

Please check the package for the following items:

  • UGREEN Studio Pro Wireless Headphones
  • User Manual (PDF available online)
  • 3.5mm Jack Audio Cable
  • USB Type-C Charging Cable
  • Product Warranty Card
Contents of the UGREEN Studio Pro headphone package
Package contents: Headphones, manual, 3.5mm audio cable, USB-C charging cable.

Specifications

FeatureDetail
Product NameUGREEN Studio Pro
ModelHP206
Bluetooth Version6.0
Frequency Band2400MHz-2483.5MHz
Max. RF Output Power4dBm
Transmission Distance15m/49.2ft Max (No Blocking)
Bluetooth ProfileHFP/HSP/AVRCP/A2DP/BLE/SPP
CodecsAAC, SBC, LDAC
Frequency Response Range20Hz-40kHz
Charging PortUSB-C
Battery TypePolymer Lithium-ion Battery
Battery Capacity820mAh 3.7V (3.04Wh)
Limited Charging Voltage5.25V===
Charging Input5V=1A
Charging Time1.5 Hours
Operating Time120H (ANC OFF), 80H (ANC ON)
Active Noise-CancellationYes (48dB Hybrid ANC)
MicrophoneYes
WaterproofYes
MaterialMetal, ABS, Leather
Weight246g
Dimensions (L x W x H)168mm x 87mm x 203mm
CertificationCE, FCC
Detailed product specification table
Product Specification details

Setup

1. Charging the Headphones

Before first use, fully charge your headphones. Connect the USB Type-C charging cable to the headphone's charging port and the other end to a 5V=1A power source. The charging time is approximately 1.5 hours.

2. Powering On/Off

  • Power On: Press and hold the Power button until the indicator light turns on.
  • Power Off: Press and hold the Power button until the indicator light turns off.

3. Wearing and Adjusting

Adjust the headband and earcups to ensure a comfortable and secure fit. The memory foam cushions with soft protein leather cover are designed for extended wear.

Diagram showing lightweight, collapsible design, adjustable angle, and memory foam cushions
Headphone design features: lightweight, collapsible, adjustable angle, and memory foam earcups.

4. Bluetooth Pairing

  1. Ensure the headphones are powered off.
  2. Press and hold the Power button until the indicator light flashes, indicating pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "UGREEN Studio Pro" from the list of devices.
  5. Once connected, the indicator light will stop flashing.

5. Dual Connection

The headphones support connecting to two devices simultaneously. After connecting to the first device, put the headphones back into pairing mode and connect to the second device. The headphones will intelligently switch between the two devices.

Image showing headphones connected to a phone and a laptop simultaneously
Dual Connection: Connect to two devices at once.

6. Wired Playback

To use the headphones in wired mode, connect the included 3.5mm audio cable to the headphone's audio jack and the other end to your audio source. This mode does not require battery power.

Image showing the 3.5mm audio jack on the headphone for wired connection
Wired Mode: Connect via 3.5mm audio cable.

Operation

1. Active Noise Cancellation (ANC)

The UGREEN Studio Pro features 48dB Hybrid ANC, blocking up to 97% of ambient noise. There are four customizable noise cancellation options:

  • Adaptive Noise Cancelling: Automatically adjusts based on your environment.
  • Gentle Mode: For light noise reduction.
  • General Mode: Standard noise reduction for everyday use.
  • Ultra Mode: Maximum noise reduction for very noisy environments (e.g., airplanes, trains).

Press the ANC button on the headphone to cycle through the modes or manage them via the UGREEN App.

Diagram illustrating four noise cancellation options: Adaptive, Gentle, General, Ultra
Customized Noise Cancellation with 4 Options.
Diagram showing 48dB Hybrid ANC blocking up to 97% of noise, with a graph comparing original noise level to cancelled noise level
48dB Hybrid ANC technology.

2. Hi-Res Audio & LDAC Decoding

Enjoy high-fidelity audio with 40mm dynamic drivers and LDAC audio decoding, delivering clear sound with rich details. The headphones are Hi-Res Audio certified.

Diagram illustrating Hi-Res Audio and LDAC audio decoding technology
Hi-Res Sound & LDAC Audio Decoding.

3. Quad-Speaker Enhanced Engine

Each earcup features a built-in 40mm woofer and a 12mm tweeter, providing excellent bass, midrange, and treble performance for a balanced sound profile.

Diagram showing the internal structure of the earcup with 40mm woofer and 12mm tweeter
Quad-Speaker Enhanced Engine for superior sound quality.

4. Crystal-Clear Calls & AI Wind Noise Reduction

The integrated microphone enhances voice pick-up for clear calls. The AI Wind Noise Reduction feature automatically turns off the feed-forward (FF) microphone when wind noise is detected, minimizing interference during outdoor calls.

Diagram illustrating AI Wind Noise Reduction technology
AI Wind Noise Reduction for clear communication.

5. Low Latency Gaming Mode

Switch to gaming mode for an ultra-low latency of 0.06s, providing a more synchronized audio-visual experience for gaming.

Image of a person playing a game with headphones, highlighting 0.06s low latency
0.06s Ultra Low Latency for an enhanced gaming experience.

6. Spatial Audio

The headphones support Spatial Audio, creating a three-dimensional listening experience for compatible content.

Diagram illustrating Spatial Audio technology
Spatial Audio Supported.

UGREEN App Features

Download the UGREEN App to unlock more functions and customize your listening experience:

  • Check the battery level.
  • View the connection status.
  • Select from 8 EQ sound effects (Classic, Jazz, Electronic, Popular, Classical, Rock, Bass, Treble).
  • Customize various settings.
UGREEN App interface showing battery level, connection status, EQ settings, and custom settings
UGREEN App interface for managing headphone settings.
UGREEN App interface showing 8 EQ sound effects options
8 EQ Sound Effects available through the UGREEN App.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the headphones in a cool, dry place. The foldable design allows for compact storage.
  • Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in use for extended periods.
  • Water Resistance: The headphones are waterproof, but avoid submerging them in water.

Troubleshooting

Headphones won't power on:
Ensure the headphones are charged. Connect them to a power source using the USB-C cable.
Cannot pair with device:
Make sure the headphones are in pairing mode (indicator light flashing). Ensure Bluetooth is enabled on your device and it's within range. Try restarting both the headphones and your device.
No sound or poor sound quality:
Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired. If using wired mode, check the 3.5mm cable connection. Try disabling/enabling ANC to see if it affects sound.
ANC not working effectively:
Ensure the earcups form a good seal around your ears. Try switching between different ANC modes via the button or the UGREEN App.
Language settings in the app are not English:
Check the settings within the UGREEN App for language options. If the app's language is tied to your phone's system language, you may need to adjust your phone's settings.

User Tips

  • For optimal sound and ANC performance, ensure the earcups fit snugly over your ears.
  • Regularly check the UGREEN App for firmware updates to ensure the best performance and access to new features.
  • If you experience issues with the app's language, verify your phone's system language settings, as the app may default to it.

Warranty and Support

The UGREEN Studio Pro Wireless Headphones come with a Two-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance, troubleshooting, or warranty inquiries, please contact UGREEN customer support. You can also refer to the comprehensive user manual PDF available online for more detailed information.

Note: The full user manual is available as a PDF document. Reference: UGREEN Studio Pro User Manual (PDF)