NaviFly Universal Car Multimedia Video Player Instruction Manual

1. Safety Measures

Thank you for choosing our car multimedia system. To ensure effective and safe use, please read and adhere to the following guidelines:

• Driving Safety: It is strictly forbidden to watch videos or use other visual accessories that may distract you while driving. Active use of the system while driving is not recommended as it can lead to reduced attention and potential road accidents.
• Power Supply: This unit is designed for use in cars with a 12V DC power supply and a negative ground. Do not install the system in vehicles with a 24V on-board voltage, as this may cause severe damage and will void the warranty.
• Screen Care: Use only a specialized cleaning device to clean the screen. Avoid harsh chemicals or abrasive materials.
• Temperature Guidelines: To prevent overheating, avoid direct exposure to sunlight and do not install the unit near heating systems. The optimal operating temperature is between 0°C and 35°C. If the vehicle's interior temperature is too high or too low, allow it to normalize before operating the system. Extreme temperatures can affect display performance.
• Installation: Use only the fasteners (screws, mounting frames, etc.) provided for installation. The use of other fasteners may cause damage. Installation and connection of the device should be performed by a qualified specialist or trained service personnel.
• Factory Settings: Do not reset the device to factory settings on your own unless absolutely necessary, as this will result in loss of your personalized settings and may lead to incorrect operation.
• Warranty: Violation of these safety measures and improper use may cause the system to malfunction, in which case warranty service will not be performed.

2. Package Contents

The package typically includes the following items. Please verify all components upon receipt:

• Main Unit (Car Multimedia Player)
• RCA Cable (Note: M90S/95S models may not include cooling fan connector cable)
• Reversing Camera
• USB Cable
• Microphone (MIC)
• GPS Antenna

For 9863 models (M200S, M300S, M400S, M500S, M600S, M700S, M800S), additional accessories may include:

• USB plug*2 (for 9863) or USB plug*3 (for 7862)
• Audio Out Cable
• 4G Antenna

Figure 2.1: Package Contents for various models.

3. Technical Specifications

Figure 3.1: Detailed parameter comparison for various NaviFly models.

4. Setup and Installation

Proper installation is crucial for optimal performance. It is highly recommended that installation be performed by a qualified professional.

4.1. Connection Diagrams

Refer to the following diagrams for detailed wiring instructions. Ensure all connections are secure and correct to prevent device malfunctions.

Figure 4.1: Back of the host device wiring diagram for M200S-M800S models, showing GPS, 5G WiFi, Radio, 4G Antenna, USB, Cooling fan, Canbus connection, and Coxail/Fiber optic ports.

For a comprehensive pinout diagram, refer to the 'Device connector pinout diagram' section in the PDF manual (page 11).

4.2. CANBus Box Setup

If your car's original functions (e.g., steering wheel control) are not working, a CANBus box may be required. Follow these steps:

1. Check your specific CANBus photo and select the corresponding CANBus type in the device settings.
2. For models like TS7, T3L, TS18, TS10, M100, M150, Y1, Y2, TS100, TS150, TS200, connect the CANBus box as shown in the provided diagram.
3. Navigate to Settings > Car Settings > Factory (Password: 8888) to configure the CANBus settings.

Figure 4.2: Example of CANBus box types and cooling fan integration.

4.3. Rear Camera Connection

Connecting a rear camera enhances safety during reversing. The method varies slightly depending on whether you use a CANBus box:

• Without CANBus Box: Connect the reversing mode control, reverse light power supply (12V), and ground to the appropriate ports.
• With CANBus Box: The wiring is often simplified. The yellow line connection for reverse detection may not be needed if the CANBus box handles this signal. Ensure the camera's power supply (red wires) is connected correctly.

Figure 4.3: Rear View Camera display with parking lines.

4.4. Cooling Fan Installation

A cooling fan helps maintain optimal operating temperature and extends the device's lifespan. The fan can be automatically or manually controlled.

1. Locate the cooling fan connector on the back of the host device.
2. If applicable, push down the iron plate, open the slot, insert the SIM card (for 4G models), and then pull the iron plate up to secure it.
3. The cooling fan will start working once connected and the device is powered on.

Figure 4.4: Diagram showing the cooling fan and its integration.

5. Operating Instructions

5.1. Front Panel Control

The front panel provides quick access to essential functions:

• Microphone: For voice commands and calls.
• Emergency Reassembly: Button for system reset or recovery.
• Input/Output Switch: Toggles between different audio/video inputs.
• Main Menu: Returns to the main interface.
• Previous Menu: Navigates back to the previous screen.
• Volume Up/Down: Adjusts the audio volume.

5.2. Switching On/Off

The multimedia system automatically switches on after the ignition is turned on and the engine starts. The display will show the initial screen. The unit will also activate automatically if the engine is switched off and then restarted.

5.3. Touch Screen Operation

The unit features an interactive touchscreen display. Ensure the protective plastic membrane is removed before first use.

• Touch: Tap an item to select it or start a function.
• Double Tap: Quickly tap twice to resize images or activate specific functions.
• Touch & Hold: Press and hold an item for 2 seconds to trigger additional actions.
• Dragging: Touch and hold an item, then drag it to a new position on the screen.
• Moving: Rotate the screen by touching and moving your finger across the display.
• Scroll Through: Move your finger across the screen and release to scroll. Touch again to stop scrolling.

Attention: Do not use metal or sharp objects on the touchscreen. Avoid applying excessive force.

5.4. Change Wallpaper

You can personalize your main menu background:

1. Long press on the main menu background.
2. Select your desired picture or photo from Live Spreadsheets, Spreadsheets, or from images/photos stored on a USB memory device or SD card.

5.5. FM/AM Radio

Access the Radio by tapping the 'Radio' icon on the main menu. You can quickly select desired frequencies by tapping on the scale bar.

• LOC Mode: Receives stations with strong signals only.
• DX Mode: Receives all stations in the current range.
• MONO Mode: For mono audio reception.
• Automatic Scanning: Scans and saves available stations.

5.6. DSP Processor/Equalizer

Access the equalizer (EQ) via the 'Radio' or 'Equalizer' icon. The DSP chip allows for advanced sound settings:

• Equalizer Mode: Adjust sound by modifying 32 frequency bands. Presets like Rock, Soft, Jazz, Pop, Classical, Hall are available.
• Automatic Volume Mode: Choose recommended settings for listener position (Driver, Co-pilot, Rear, All) or adjust positions on the car diagram.
• Balance Mode: Adjust speaker volume ratios for balanced sound. Supports parametric bass tuning.
• Bass Enhancement: Reverse high and low frequency tones, change boost factor.
• Bass Filter: Set desired frequency for each speaker (Front Dynamics / Rear Dynamics).

Figure 5.1: DSP Equalizer interface with 16-band EQ settings.

5.7. Music/Video Playback

Connect a USB storage device or insert an SD memory card for music and video playback. Supported video formats include MP4, AVI, MMV, MOV, MKV, MPEG, RMVB, and H.264 codec. Supported audio formats include MP3, WMA, WAV, OGG, FLAC.

Attention: For safety, video playback is only available when the car is stationary and the handbrake is applied.

5.8. Bluetooth (BT)

Access the BT hands-free interface from the main menu. Enable Bluetooth on your phone and search for new devices. Pair by selecting the device and entering the password (0000).

• Call Log: View recent incoming, outgoing, and missed calls.
• Dialing Interface: Make calls directly from the unit.
• Phone Book: Synchronize your phone's contacts with the device.
• BT Music: Stream music from your mobile phone.
• BT Settings: Configure Bluetooth options.

5.9. Car Link (CarPlay/Android Auto)

Car Link allows seamless integration of your iPhone or Android device for navigation, calls, messages, and music without distraction.

1. Connect your mobile phone to the car multimedia player via a USB cable.
2. Tap on 'Car Link' on the unit.
3. Your phone will prompt for authorization; grant it to complete the connection.

Figure 5.2: Connection steps for Wireless CarPlay (iOS) and Wireless Auto (Android).

5.10. Split Screen

The split screen feature allows you to display two applications simultaneously on the main device, such as navigation and music, for enhanced convenience.

Figure 5.3: Examples of Split Screen with online video + map and music + map.

5.11. MAP Navigation

The unit features a built-in global positioning system with omnidirectional map display and real-time traffic conditions. Supported navigation apps include Navitel, iGO, Yandex, Google, Waze, and AMAP.

Figure 5.4: GPS Navigation showing supported map applications.

5.12. 4G LTE and 5G WiFi

With built-in 4G LTE modules and 5G WiFi support, you can stay connected to fast cellular data networks and access online content (videos, music, games) without needing to turn on your phone's hotspot every time.

Figure 5.5: Illustration of 4G LTE and 5G WiFi capabilities with SIM card slot.

5.13. Language Settings

The device supports multiple national languages. To change the language, navigate to the settings menu and select your preferred language.

5.14. Main Menu Interface Settings

You can choose from 5 different main menu screens to customize the display according to your preferences. Access these settings through the device menu.

5.15. Lantern Settings (RGB)

The device features multicolor illumination. You can set it to different light modes or enable automatic color change through the settings menu.

6. Features Overview

The NaviFly multimedia system offers a range of advanced features to enhance your driving experience:

• Intelligent Voice Control: Supports voice commands in multiple languages for hands-free operation.
• Steering Wheel Control: Take control of music and calls safely with digital steering wheel control (SWC).
• 1080P HD Picture Quality: Provides clear picture quality day and night.
• Innovative Layout & Fast Operation: Optimized UI for quick access and display of information like DVR on the home screen.
• ADAS DVR Driving Recorder (Optional): Features front vehicle distance prediction, anti-collision warning, and lane departure warning for safer driving.
• AHD HD Reversing: Supports 1080P AHD waterproof rear camera with parking lines for clear night vision and wide field of view.
• AV Output (Optional): Allows video output to headrest displays for rear passengers via RCA or HDMI-compatible accessories.
• 360 Camera (Optional): Requires a built-in 360 Camera Chip on the motherboard for panoramic views.
• Extensible Optional Functions: Supports external accessories like DAB+ (for enhanced radio sound quality in EU), OBDII (for real-time vehicle data and fault codes), and TPMS (for tire pressure and temperature monitoring).
• RDS Radio FM/AM: Supports automatic and manual station search with power amplifier (TDA7738, TDA7851) and radio (Toshiba 001, TDA7708) chips.
• Sound Field Adjustment: Control the timing of sound emitted by car speakers to create a concert hall-like auditory experience.

Figure 6.1: Overview of powerful configuration and features.

7. Maintenance

To ensure the longevity and optimal performance of your NaviFly multimedia system, follow these maintenance guidelines:

• Screen Cleaning: Regularly clean the touchscreen with a soft, lint-free cloth and a specialized screen cleaning solution. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the display.
• Temperature Management: As mentioned in the safety measures, operate the device within the recommended temperature range (0°C to 35°C). Avoid prolonged exposure to direct sunlight or extreme cold/heat, which can affect internal components and screen performance.
• Connection Integrity: Periodically check all cables and connections to ensure they are secure and free from damage. Loose connections can lead to intermittent functionality or poor performance.
• Software Updates: Keep the system software updated to benefit from the latest features, performance improvements, and bug fixes. Refer to the system settings for available updates.
• General Care: Avoid physical impact or dropping the device. Keep liquids away from the unit to prevent internal damage.

8. Troubleshooting

If you encounter issues with your device, try the following solutions. If the problem persists, consult a qualified technician or contact customer support.

9. User Tips

Based on common user inquiries and experiences, here are some helpful tips:

• Vehicle Compatibility: While this is a universal unit, always verify the dimensions of the head unit (e.g., 9-inch: 227x130mm, 10-inch: 251x146mm) and screw hole distances against your car's dashboard opening. Specific fascia adapters may be required for a perfect fit in certain car models (e.g., Hyundai i30, Toyota Fortuna, Camry, Honda Civic, Skoda Fabia, Nissan Rogue, Dacia Logan, Volkswagen Gol).
• 360 Camera Functionality: If the 360-degree view is not working, ensure that the unit purchased includes the "built-in 360 Camera Chip" as it is an optional feature. Without this chip on the motherboard, the function will not operate.
• Wiring Considerations: Depending on your car's existing system (e.g., with or without CANBus), additional wiring or specific cable connections might be necessary for full functionality, such as steering wheel controls or rear cameras. Always consult the detailed connection diagrams provided.
• Language Support: The device supports multiple national languages. If your desired language (e.g., Arabic) is not displayed, check the language settings menu to select it.

Figure 9.1: Dimensions for 9-inch and 10-inch host devices.

10. Warranty and Support

10.1. Warranty Information

This NaviFly Car Multimedia Video Player comes with a one-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

Note: The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or failure to follow the safety and operating instructions.

10.2. Additional Resources

For more detailed information, including comprehensive diagrams and advanced settings, please refer to the official user manual available in PDF format:

View User Manual (PDF)

10.3. Customer Support

If you encounter any issues not resolved by the troubleshooting section or require further assistance, please contact your authorized NaviFly dealer or the manufacturer's customer support team. Provide your product model and a detailed description of the issue for efficient service.