1. Product Overview
The HTI HT-203U is a compact infrared thermal imager designed to connect directly to your Android mobile phone via a Type-C or Micro USB connector. It transforms your smartphone into a powerful thermal camera, capable of detecting temperature differences across a wide range, making it ideal for electrical repair, PCB circuit analysis, facility maintenance, and various inspection tasks.

2. Setup Guide
- Compatibility Check: Ensure your mobile phone runs Android system 6.0 or above and has a Type-C or Micro USB port. A Micro USB connector adapter is included for compatibility.
- App Installation: Download and install the official HTI thermal imaging application from your phone's app store or by scanning the QR code provided with the product.
- Connect the Device: Plug the HT-203U thermal imager into your phone's Type-C port. If your phone uses Micro USB, attach the provided Micro USB connector adapter to the imager first, then plug it into your phone.
- Launch the App: Open the installed thermal imaging application. The device is powered directly by your phone, so no external charging is required for the imager itself.

3. Operating Instructions
Once connected and the app is launched, the thermal imager will begin displaying real-time thermal images on your phone screen. The application provides various features to enhance your thermal analysis:
- Temperature Unit Selection: Switch between Celsius (°C) and Fahrenheit (°F) directly within the app settings.
- Measuring Range: Adjust the displayed temperature range for optimal visualization of specific thermal anomalies.
- Thermal Control & Emissivity: Fine-tune thermal control and set the emissivity (0.01~1.00 Adjustable) to ensure accurate temperature readings for different materials.
- Color Palettes: Choose from 8 different color palettes (e.g., White Hot, Black Hot, Blend, Green Hot, Iron, Dark Brown, Red Hot, Rainbow, Cool, Black Heat) to best highlight temperature variations for your specific application.
- Detail Enhancement: Utilize the detail enhancement feature to improve the clarity of temperature changes, allowing for more accurate monitoring and better judgment of target status.
- Temperature Alarm: Set custom temperature alarms to be notified when temperatures exceed or fall below specified thresholds.
- Measurement Modes: The device supports center point, hot spot, and cold spot tracking. It also allows for temperature measurement of points, lines, and surfaces.
- Capture & Record: Take photos and shoot videos of thermal images directly from the app for documentation and analysis.
- Language Selection: The app supports multiple languages, including English.



4. Maintenance
- Cleaning: Gently wipe the lens and device body with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the device.
- Storage: Store the thermal imager in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided protective case when not in use.
- Handling: Handle the device with care to prevent drops or impacts, which could affect its delicate internal components.
5. Troubleshooting
- Device Not Detected: Ensure the device is securely plugged into your phone's Type-C or Micro USB port. Verify that your phone's Android version is 6.0 or above. Try restarting the app or your phone.
- Inaccurate Readings: Check the emissivity setting in the app; adjust it according to the material being measured for better accuracy. Ensure there are no obstructions between the imager and the target.
- App Crashing/Freezing: Ensure the app is updated to the latest version. Clear the app's cache or reinstall it if issues persist.
- No Image Display: Confirm that the app has the necessary permissions to access the USB device.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | HT-203U |
| Measuring Range | -20℃~550℃ (-4℉~1022℉) |
| Accuracy | ±2℃ or ±2% |
| Thermal Image Resolution | 256x192 pixels |
| Wavelength Coverage | 8~14μm |
| Pixel Size | 12μm |
| Focal Length | 3.2mm |
| Frame Rate | 25Hz |
| Temperature Measurement Mode | Center point/hot and cold spot tracking |
| Temperature Measurement Method | Points, lines, and surfaces |
| Palette Options | Rainbow/Iron Red/Cool/White Heat/Black Heat |
| NETD Lens Focal Length | ≤ 40mk@25℃,@F/1.2 |
| Field Angle | 50.0°×37.2° |
| Detector Type | Amorphous silicon uncooled infrared focal plane |
| Emissivity Setting | 0.01~1.00 Adjustable |
| Focus Mode | No focusing |
| Thermal Sensitivity | 0.1℃ |
| Working Temperature | -20℃~50℃ |
| Storage Temperature | -30℃~70℃ |
| Weight | 28g |
| Size | 46*70*14mm |
| Battery Included | No (powered by phone) |
| High-concerned chemical | None |
| Is Smart Device | No |
| Power Type | None (powered by phone) |
| Style | Embedded |
| Origin | Mainland China |
| Certification | CE, RoHS |
7. Warranty and Support
The HTI HT-203U thermal imager is certified with CE and RoHS, indicating compliance with European safety, health, and environmental protection standards. For specific warranty details and technical support, please refer to the manufacturer's official website or contact your point of purchase.
8. User Tips
- Easy Start: The device is designed for quick and easy setup. Simply plug it into your compatible Android phone and launch the app to begin thermal imaging.
- Check Functionality: If you suspect a machine or component is not working correctly, use the thermal imager to check for abnormal heat signatures, which can indicate operational issues.
- Leak Detection: For underfloor heating or water pipes, look for significant temperature differences on surfaces. A localized cold spot on a heated floor, for example, could indicate a water leak.
- Android Compatibility: Remember that this device is specifically designed for Android phones (version 6.0 and above) with Type-C or Micro USB ports. It is not compatible with iOS devices like iPhones.