1. Product Overview
The UGREEN Magnetic Car Phone Holder (Model 35009) is designed to securely hold your smartphone in your vehicle's air vent, providing convenient access to navigation, music, and calls. It features strong N52*20 magnets for a firm grip and a 360-degree swing arm for flexible viewing angles. This holder is compatible with MagSafe-enabled iPhones and can be used with other smartphones by attaching a metal ring.

2. Package Contents
- UGREEN Magnetic Car Phone Holder
- Metal Rings (for non-MagSafe phones)

3. Setup Instructions
Check Air Vent Compatibility
Ensure your car's air vent is compatible with the holder. The holder is designed for horizontal and vertical slat vents, including some round vents with horizontal slats. It is generally not compatible with round vents that have radial slats or certain vertical-only slat designs.

Air Vent Compatibility: Check your car's vent type. Install the Holder
Gently push the air vent clip onto one of your car's air vent slats until it is securely in place. Ensure the holder is stable and does not wobble.

Quick Install: Ready to Go! Prepare Your Phone
- **For iPhone 12/13/14/15 Series (MagSafe compatible):** Your phone can directly attach to the magnetic holder.
- **For Other Phones:** Attach one of the provided metal rings to the back of your phone or phone case. Ensure the ring is centered for optimal magnetic connection.

Phone Compatibility: MagSafe phones attach directly; others require a metal ring.
Watch this video for a visual guide on installation and usage:
4. Operating Instructions
Attaching Your Phone
Once the holder is installed and your phone is prepared, simply bring your phone close to the magnetic surface of the holder. The strong N52*20 magnets will automatically align and securely hold your device. The magnetic force is rated at 18N (1800g) to prevent falling off.

1s Quick Attach! Experience strong magnetic force. 
Strongest Magnetic Force: No More Falling off. Adjusting Viewing Angle
The holder features a 360-degree swing arm and a flexible ball joint, allowing you to adjust your phone to any desired vertical or horizontal viewing angle. The arm extends approximately 2.95 inches for optimal positioning.

360° Swing Arm for More Flexible viewing. 
More Angles for You: Adjust up, down, left, or right. Air Vent Clearance
The design ensures that the holder does not block your car's air vent, allowing for proper airflow and maintaining cabin comfort.

Never Blocking Air Vent. Signal and Wireless Charging
The magnetic design is engineered to not interfere with your phone's signal (5G) or wireless charging capabilities. Please note that this holder does not provide charging functionality itself.

No Effect On Signal And Wireless Charging (No Charging Function).
5. Maintenance
- Keep the magnetic surface clean and free from dust or debris to ensure optimal grip.
- Periodically check the air vent clip for tightness and adjust if necessary.
- Avoid exposing the holder to extreme temperatures for prolonged periods.
- Clean the holder with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
6. Troubleshooting
- Phone not holding securely:
- Ensure the magnetic surface on the holder and your phone/metal ring is clean.
- If using a metal ring, verify it is properly attached and centered on your phone/case.
- Check if your phone case is too thick, which might weaken the magnetic connection.
- Holder wobbles in the air vent:
- Ensure the air vent clip is fully inserted and tightened (if adjustable).
- Confirm your air vent type is compatible with the holder.
- Phone signal interference:
- The holder is designed not to interfere with signals. If you experience issues, try repositioning your phone or checking for other sources of interference.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Number | 35009 |
| Type | Car Holder |
| Features | Magnetic |
| Magnets | N52*20 |
| Holding Force | 18N (1800g) |
| Swing Arm Length | Approx. 2.95 inches |
| Has Speaker | No |
| Charger | No |
| Compatible Brand | Universal |
| Origin | Mainland China |
8. User Tips
- This holder is compatible with iPhone 13 and newer models that feature MagSafe technology.
- For optimal stability, ensure the air vent clip is firmly attached to a sturdy vent slat.
- When using the metal ring for non-MagSafe phones, place it on the outside of your phone case for the strongest magnetic connection.
9. Warranty and Support
For warranty information and customer support, please refer to the official UGREEN website or contact your retailer. Keep your purchase receipt for any warranty claims.