1. Introduction
The TINGEN Pro-05 WiFi Plug is designed to enable wireless monitoring and management of compatible hybrid inverters, including models HPS3KVA, SP3200VA, SP7000VA, and SP2200VA. This device facilitates seamless communication between your inverter and the SmartESS mobile application, allowing you to monitor system performance remotely.
Figure 1: TINGEN Pro-05 WiFi Plug
2. Installation
Follow these steps to correctly install the WiFi Plug onto your hybrid inverter.
2.1 General Installation Steps
- Align the serial port of the Wi-Fi Plug with the corresponding port on the inverter and plug it in tightly.
- Fasten the Wi-Fi Plug securely to the inverter using the provided screw.
- After installation, confirm the status of the LED lights. When all 4 LED lights remain on, it indicates normal working status.
2.2 Installation Methods by Datalogger Model
Refer to the table below to identify the correct interface code for your datalogger model, then follow the specific installation method.
Figure 2: Datalogger Interface Codes and Installation Methods
| Datalogger Model | Interface Code | Interface Icon |
|---|---|---|
| Wi-Fi PlugII - 01/11 (Method 1) | 1 | (Standard Serial Port) |
| Wi-Fi PlugII - 04 (Method 2) | 1 | (Standard Serial Port) |
| Wi-Fi PlugII - 02/10 | 2 | (Round Connector) |
| Wi-Fi PlugII - 07 | 3 | (USB-like Connector) |
| Wi-Fi PlugII - 03/05/06/08/12/13 | 4 | (Rectangular Connector) |
Method 1 (for Interface Code 1 - Standard Serial Port)
- Connect the 4PIN power cable of the Wi-Fi Plug to the inverter.
- Fasten the Wi-Fi Plug to the inverter with the screw.
Method 2 (for Interface Code 1 - Standard Serial Port)
- Connect the 2 PIN green interface of the Wi-Fi Plug to the RS-485 terminal of the inverter.
- Connect the 5PIN power cable of the Wi-Fi Plug to the inverter.
- Fasten the Wi-Fi Plug to the inverter with the screw.
For Interface Code 2 (Round Connector)
- Align the 4-hole aviation plug of the Wi-Fi Plug with the inverter and plug it in.
- Tighten the nut of the Wi-Fi Plug to the inverter.
3. Operating Instructions
After physical installation, connect the WiFi Plug to your wireless network and the SmartESS application.
Figure 3: Wireless Router Connection and App Setup
3.1 Download the SmartESS App
Scan the appropriate QR code from Figure 3 above to download the SmartESS application for iOS or Android.
3.2 Connect Wi-Fi Datalogger to App
- On your phone, go to WLAN settings and select the Wi-Fi network corresponding to your Wi-Fi Plug. The network name will typically include the Plug's PN (Product Number). The initial password is 12345678.
- Open the SmartESS application.
- Tap the Wi-Fi Config button within the app to proceed with the configuration.
- Follow the on-screen prompts in the app to complete the connection to your home or local wireless router.
4. Specifications
| Feature | Detail |
|---|---|
| Brand Name | TINGEN |
| Model | Pro-05 WiFi Plug |
| Type | DC/AC Inverter Accessory (WiFi Datalogger) |
| Compatibility | HPS3KVA, SP3200VA, SP7000VA, SP2200VA Hybrid Inverters |
| Connectivity | WiFi & GPRS (for iOS and Android app monitoring) |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (approx.) | 20 cm (L) x 20 cm (W) x 10 cm (H) |
| Package Weight (approx.) | 0.5 kg |
5. Maintenance
- Keep the WiFi Plug clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure the device is installed in a dry environment, away from direct moisture or extreme temperatures.
- Periodically check all cable connections to ensure they are secure.
6. Troubleshooting
- No LED lights / Device not powering on: Check the connection to the inverter. Ensure the inverter is powered on.
- Cannot find WiFi network: Ensure the WiFi Plug is correctly installed and powered. Try restarting the inverter and the WiFi Plug.
- Cannot connect to SmartESS app:
- Verify you have entered the correct initial password (12345678) for the WiFi Plug's network.
- Ensure your phone is connected to the WiFi Plug's network before attempting configuration in the app.
- Check your home router's settings to ensure it's broadcasting a compatible 2.4GHz Wi-Fi signal.
- Update the SmartESS app to the latest version.
- Inconsistent data or connection drops:
- Ensure the WiFi Plug is within range of your wireless router.
- Minimize interference from other electronic devices.
- Check your internet connection stability.
7. User Tips
No specific user tips were available from reviews or Q&A for this product. Always ensure a stable Wi-Fi connection for optimal performance.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the TINGEN customer service department. Keep your purchase receipt as proof of purchase.
