KCEVE HDMI USB 3.0 KVM Switch

Contents

KCEVE HDMI USB 3.0 KVM Switch User Manual

Model: HDMI USB 3.0 KVM Switch

1. Introduction

The KCEVE HDMI USB 3.0 KVM Switch is designed to allow three desktop or laptop computers to share three monitors and four USB 3.0 peripheral devices. This device helps to streamline your workspace, making it tidy and efficient, especially for home office setups. It supports high-resolution video output and offers flexible switching options between connected computers.

KCEVE HDMI USB 3.0 KVM Switch with cables and monitors
Figure 1: KCEVE HDMI USB 3.0 KVM Switch with connected devices, highlighting 8K@60Hz capability.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x Triple Monitor USB 3.0 HDMI+DP KVM Switch
  • 3 x USB 3.0 Cables (1.5m/4.9ft)
  • 1 x Wired Remote Controller (1.52m/5ft)
  • 1 x 12V Power Adapter (1.52m/5ft)
  • 1 x User Manual (this document)
Package contents of the KVM switch including the switch, cables, remote, and power adapter.
Figure 2: Contents included in the KVM Switch package.

3. Specifications

Feature Description
Product Type Triple Monitor USB 3.0 KVM Switch (3x3)
Inputs 3 x PC (2x DisplayPort 1.4, 1x HDMI 2.1, 1x USB 3.0 per PC)
Outputs 3 x Monitors (2x DisplayPort, 1x HDMI), 4 x USB 3.0 Ports
DisplayPort Resolution Up to 8K@30Hz, 4K@144Hz, 4K@120Hz (backward compatible)
HDMI Resolution Up to 8K@60Hz, 4K@120Hz, 4K@60Hz (backward compatible)
USB Data Transfer Rate USB 3.0: Up to 5Gbps (USB 2.0: 480Mbps)
Switching Methods Physical button on panel, Wired remote controller
Operating Systems Linux, Windows, Chrome OS, Mac OS
Dimensions (L x W x H) 12cm (4.72in) x 6.6cm (2.59in) x 4.4cm (1.73in)
Detailed resolution specifications for DisplayPort and HDMI outputs.
Figure 3: Resolution and refresh rate capabilities of the KVM Switch.
Comparison of USB 3.0 and USB 2.0 data transfer speeds.
Figure 4: USB 3.0 offers significantly faster data transfer rates.

4. Setup Instructions

Before connecting, ensure your computer supports triple display output. You can test this by connecting your PC directly to three monitors (not via the KVM switch). If all three monitors display a screen, your computer supports multi-monitor display.

  1. Power Off Devices: Ensure all computers and monitors are powered off before beginning the connection process.
  2. Connect Monitors to KVM Output: Connect your three monitors to the KVM switch's output ports (OUT A, OUT B, OUT C). Use DisplayPort cables for DP outputs and HDMI cables for HDMI outputs.
  3. Connect Computers to KVM Input: For each computer (PC1, PC2, PC3) you wish to connect:
    • Connect the video outputs (2x DisplayPort 1.4 and 1x HDMI 2.1) from your computer to the corresponding INPUT ports (INPUT A, INPUT B, INPUT C) on the KVM switch.
    • Connect one USB 3.0 cable from your computer to the corresponding USB 3.0 INPUT port on the KVM switch (e.g., PC1's USB to KVM's USB 3.0 INPUT A).
    • Important: Ensure all 2 DP+HDMI cables and the USB cable are connected from each computer to the KVM INPUT for proper triple screen display and USB device recognition. If the input USB 3.0 ports are not connected or connected incorrectly, the output USB devices will not be recognized.
    • For computers with discrete and integrated graphics cards, both 2 DP+HDMI ports must belong to the discrete graphics card.
  4. Connect USB Peripherals: Connect your keyboard, mouse, printer, scanner, or other USB 3.0 devices to the 4 USB 3.0 ports on the KVM switch.
  5. Connect Wired Remote (Optional): Plug the wired remote controller into the designated port on the KVM switch.
  6. Power On: Connect the 12V Power Adapter to the KVM switch and then plug it into a power outlet. Power on your monitors and then your computers.
Detailed wiring diagram for connecting three PCs and three monitors to the KVM switch, including USB peripherals.
Figure 5: Connection diagram for PCs, monitors, and USB devices.

5. Operating Instructions

Switching Between Computers

The KVM switch offers two convenient methods for switching between connected computers:

  • Physical Button Switch: Press the PC1, PC2, or PC3 buttons on the front panel of the KVM switch to select the desired computer. The corresponding color light will indicate the active computer.
  • Wired Remote Switch: Use the included wired remote controller to switch between computers. Press the numbered buttons (1, 2, or 3) to select the corresponding PC.
Illustration of physical button switching and wired remote switching methods.
Figure 6: Two methods for switching between computers.

Display Modes (Extend Mode & Copy Mode)

After connecting correctly, you can configure your display mode using your computer's operating system settings. For Windows, press Windows + P on your keyboard to open the display projection menu. From there, you can choose between:

  • Extend Mode: In this mode, your three monitors will display independent images, extending your desktop across all screens. You can drag windows between the three monitors.
  • Copy Mode (Duplicate Mode): In this mode, all three monitors (A, B, C) will display the same image, duplicating your primary display.
Diagram showing Extend Mode and Copy Mode for triple monitor setups.
Figure 7: Visual representation of Extend Mode and Copy Mode.
Video 1: Demonstration of switching between Extend and Duplicate display modes using Windows+P.

6. Compatibility

The KVM switch is designed for broad compatibility with various operating systems and devices:

  • Operating Systems: Driver-free and plug-and-play with Linux, Windows, Chrome OS, and Mac OS.
  • Peripherals: Compatible with standard USB keyboards, mice, printers, scanners, and other USB 3.0 devices.

Important Compatibility Notes:

  • MAC M1/M2: Only supports one external screen; multi-screen output is not supported due to chip limitations.
  • MST Multi-Screen Docking Station: If using an MST multi-screen docking station, the computer's CPU typically requires support for 11th generation or newer for optimal performance.
Operating system compatibility for the KVM switch, including Linux, Windows, Chrome OS, and Mac OS.
Figure 8: KVM Switch is compatible with multiple operating systems.

7. Troubleshooting

If you encounter issues with your KVM switch, please refer to the following common troubleshooting steps:

  • No Display on Monitors:
    • Ensure all video cables (DisplayPort and HDMI) are securely connected from your computers to the KVM switch and from the KVM switch to your monitors.
    • Verify that each connected PC has the ability to support multi-display output. Test by connecting monitors directly to the PC.
    • Check that the KVM switch is powered on and the correct input (PC1, PC2, or PC3) is selected.
    • Use high-quality HDMI 2.1 and DisplayPort 1.4 cables. Shorter cables are generally better for maintaining signal integrity, especially at higher resolutions.
  • USB Devices Not Recognized:
    • Confirm that the USB 3.0 cables are correctly connected from each computer to the corresponding USB 3.0 INPUT ports on the KVM switch.
    • Ensure the USB peripherals are properly plugged into the KVM switch's USB 3.0 output ports.
    • Try connecting the USB device directly to the computer to rule out device issues.
  • Display Mode Issues (Extend/Copy):
    • For Windows, press Windows + P and select the desired display mode (Extend or Duplicate).
    • Ensure your graphics card drivers are up to date.
  • Intermittent Signal/Flickering:
    • Check all cable connections for looseness.
    • Reduce cable length if possible.
    • Ensure your graphics card and monitors support the selected resolution and refresh rate.

8. User Tips

  • Cable Quality: Always use high-quality HDMI 2.1 and DisplayPort 1.4 cables to ensure stable performance, especially when running at 8K or 4K high refresh rates. Shorter cables are generally recommended.
  • Multi-Display Support: Before purchasing or setting up, confirm your computer's graphics card and operating system can natively support the number of monitors you intend to use in an extended or duplicate configuration.
  • DisplayPort 1.2 Compatibility: While the KVM switch supports DisplayPort 1.4, it is generally backward compatible with DisplayPort 1.2, allowing you to connect devices using older DP standards, though resolutions and refresh rates will be limited by the older standard.
  • USB Connections: Ensure all USB 3.0 input cables from your PCs to the KVM are connected. Without these, your shared USB peripherals will not function.

9. Maintenance

To ensure the longevity and optimal performance of your KCEVE KVM Switch, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or aerosols, which may damage the unit.
  • Ventilation: Ensure the KVM switch is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Management: Keep cables organized and untangled to prevent damage and ensure proper connections.

10. Warranty and Support

KCEVE is committed to providing high-quality products and excellent customer service. As a technology product, some compatibility errors may occur. We offer comprehensive after-sales support, including product replacement and technical assistance.

For any questions, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the product. Look for the "Ask a question" option on the seller's store page.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.