Refoss R10

Contents

Refoss R10 WiFi Smart Switch Module User Manual

Model: R10 | Brand: Refoss

1. Introduction

The Refoss R10 WiFi Smart Switch Module is designed to transform your traditional light switches into smart, controllable devices. Utilizing the ESP8266 chip solution, this module allows for remote control via the Refoss app, voice control through Amazon Alexa and Google Assistant, and integration with Home Assistant. It supports various types of single-pole switches and offers features like scheduling, timers, and energy monitoring to enhance your home automation experience.

Refoss R10 WiFi Smart Switch Module with terminal labels and compatibility logos

Figure 1: Refoss R10 WiFi Smart Switch Module

Video 1: Product demonstration showcasing features like safety design, Home Assistant compatibility, energy monitoring, timer/schedule, voice control, and remote control.

2. Safety Information

  • Electrical Safety: Never install or handle the device while it is electrified. Always ensure the power supply is turned off at the circuit breaker before any installation or maintenance.
  • Professional Assistance: If you lack the necessary installation knowledge or are unsure about any wiring procedures, please seek the assistance of a qualified professional electrician.
  • Wiring Precautions: Do not input AC high voltage into the DC 12V port, as this may cause severe damage to the device and pose a safety risk.
  • Debugging Port: The rubber plug on the back of the R10 covers the debugging serial port. It is essential not to remove this rubber plug during normal use to prevent any potential harm to personal safety.
  • Environmental Conditions: Ensure the device is installed in a dry environment, away from water and excessive humidity.

3. Specifications

AttributeValue
Brand NameRefoss
Model NumberR10
Communication MethodWi-Fi
Max Current10A
Dimensions (L x W x H)4.3 cm x 4.3 cm x 1.9 cm
Weight0.28 kg
OriginMainland China
CertificationCE, FCC, RoHS
High-concerned chemicalNone
Safety Design features and dimensions of the Refoss R10 module

Figure 2: Safety Design and Dimensions (10A Max, Pure copper terminal, PC flame retardant material, 4.3x4.3x1.9cm)

4. Setup and Installation

4.1 Pre-installation Checklist

  • Ensure you have a neutral wire (normally blue) available in your switch box. The R10 module requires a neutral wire for operation.
  • Turn off the power to the switch at the circuit breaker before beginning installation.
  • Confirm your existing switch is a single-pole type (Rocker, Reset, or Touch Light Switch).
Diagram showing compatibility with Rocker, Reset, and Touch Light Switches

Figure 3: Switch Compatibility with various single pole switches

4.2 Wiring Instructions

The compact design of the R10 module allows it to be placed directly into a standard switch box for intelligent control. Follow the wiring diagram carefully:

Wiring diagram for Refoss R10 module showing Live, Load-1, Neutral, and Switch-1 connections

Figure 4: Neutral Wire Required Wiring Diagram. Connect Live, Load-1, Neutral, and Switch-1 as shown.

Diagram showing the Refoss R10 module installed behind an existing light switch

Figure 5: Installation example of the R10 module behind an existing switch.

4.3 App and Smart Home Integration

  1. Refoss App Setup: Download the Refoss app from your smartphone's app store. Follow the in-app instructions to connect and configure the device's Wi-Fi.
  2. Web Portal Access: The device can also be configured and controlled through its web interface.
  3. Home Assistant Integration: You can integrate the R10 module directly into Home Assistant. After connecting the device to Wi-Fi via the Refoss app or web portal, find its IP address (usually in your router settings). Then, integrate the device into Home Assistant using this IP address.
  4. Alexa/Google Assistant: Once set up with the Refoss app, enable the Refoss skill in your Amazon Alexa or Google Home app to link your accounts and enable voice control.
Screenshot of Home Assistant interface on a monitor, indicating compatibility with Home Assistant and Web Portal

Figure 6: Compatible with Home Assistant and Web Portal for advanced integration.

5. Operating Instructions

5.1 Remote Control

Control your lights or fans from anywhere using the Refoss app on your smartphone, provided you have internet access. Ensure the Refoss app has permission to use mobile data.

Hand holding a smartphone with the Refoss app, showing remote control functionality

Figure 7: Remote Control via Refoss App.

5.2 Voice Control

Use voice commands with Amazon Alexa or Google Assistant for hands-free control of your connected devices. Simply say commands like "Alexa, turn on the light" or "Hey Google, turn off the bedroom light."

Woman using voice control with Alexa to turn on lights

Figure 8: Voice Control with Amazon Alexa and Google Assistant. Note: Apple HomeKit is NOT supported.

5.3 Schedules and Timers

Set custom schedules and auto-off timers to automate your lighting and save energy. These schedules can still perform even if your internet connection is temporarily down.

Diagram illustrating energy saving through sunrise/off and sunset/on schedules

Figure 9: Save Energy with Schedules and Timers.

5.4 Energy Monitoring

Track the power consumption of your connected devices through the Refoss app to help you live a low carbon footprint life.

6. Maintenance

  • Keep the device clean and dry. Avoid exposing it to moisture or extreme temperatures.
  • Do not attempt to disassemble or repair the device yourself, as this will void the warranty and could be dangerous.
  • Regularly check for firmware updates through the Refoss app to ensure optimal performance and security.

7. Troubleshooting

7.1 Device Not Responding / Connectivity Issues

  • Ensure the device is properly wired and receiving power.
  • Check your Wi-Fi network to ensure it is active and the device is within range.
  • Restart the device by turning off the power at the circuit breaker for a few seconds, then turning it back on.
  • Verify that the Refoss app is up to date and your smartphone has a stable internet connection.

7.2 Abnormal Temperature Readings (e.g., 80 or 100°C)

If your device shows abnormal temperature readings upon initial use, you can calibrate the temperature using the following command in the console (if accessing the web portal or debugging interface):

ADCParam1 2, 4000,80000,4250,1

Enter this exact command to recalibrate the temperature sensor.

8. User Tips

  • Home Assistant Integration: For seamless integration with Home Assistant, ensure you have configured the device's Wi-Fi first through the Refoss app or its web portal. The device's IP address, found in your router settings, is crucial for Home Assistant setup.
  • Debugging Serial Port: The R10 module features a debugging serial port (covered by a rubber plug) based on the ESP8266 chip. This port allows for advanced customization, such as integrating with various platforms or defining new functions. However, be aware that performing flashing operations (e.g., Tasmota firmware burning) will void the product's eligibility for after-sale return or exchange. Proceed with caution and only if you are experienced with such procedures.

9. Support

For any questions, technical assistance, or support regarding your Refoss R10 WiFi Smart Switch Module, please feel free to contact us at:

Email: support@refoss.net


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.