Hotpoint-Ariston WMSG 8019 B 6204+6205 2RS

Contents

Hotpoint-Ariston WMSG 8019 B Washing Machine Bearing and Seal Kit

Instruction Manual

1. Product Overview

This kit provides essential replacement parts for the Hotpoint-Ariston WMSG 8019 B washing machine, specifically designed to address issues related to drum bearings and the main shaft seal. The kit includes two high-quality bearings (6204 2RS and 6205 2RS), a durable oil seal with precise dimensions (30x52x8.5/10.5), and a specialized HYDRA-2 universal lubricant to ensure proper installation and extended lifespan of the components.

Overview of the bearing and seal kit with lubricant. Includes two bearings (6204 and 6205 2RS), a seal (30x52x8.5/10.5), and a 2ml syringe of HYDRA-2 universal lubricant, specifically for the oil seal. Guaranteed 100% quality.
Overview of the bearing and seal kit with lubricant. Includes two bearings (6204 and 6205 2RS), a seal (30x52x8.5/10.5), and a 2ml syringe of HYDRA-2 universal lubricant, specifically for the oil seal. Guaranteed 100% quality.

2. Specifications

FeatureDetail
Compatible Washing Machine ModelHotpoint-Ariston WMSG 8019 B
TypeWashing Machine Parts (Bearing and Seal Kit)
Bearings Included1x 6204 2RS, 1x 6205 2RS
Oil Seal Dimensions30x52x8.5/10.5 mm
Lubricant TypeHYDRA-2 Universal Lubricant (specifically for oil seals)
Lubricant Volume2 ml
OriginMainland China
Package Weight0.3 kg
Package Dimensions (L x W x H)10 cm x 6 cm x 13 cm

3. Package Contents

Upon opening the package, please verify that all the following components are present and undamaged:

  • 1x Bearing 6204 2RS
  • 1x Bearing 6205 2RS
  • 1x Oil Seal 30x52x8.5/10.5
  • 1x Syringe of HYDRA-2 Universal Lubricant (2ml)
Alternative view of the bearing and seal kit components, including bearings, seal, and lubricant syringe.
Alternative view of the bearing and seal kit components, including bearings, seal, and lubricant syringe.

4. Setup and Installation

Important: Replacing washing machine bearings and seals is a complex task that requires specialized tools and technical knowledge. It is highly recommended that this procedure be performed by a qualified technician to ensure proper installation and prevent further damage to the appliance.

  1. Disassembly: Disconnect the washing machine from power and water supplies. Carefully disassemble the washing machine to access the drum and its bearing housing. This typically involves removing the top, front, and sometimes the back panels, then separating the drum halves.
  2. Remove Old Components: Extract the old, worn-out bearings and oil seal from the drum shaft and housing. Clean the bearing housing thoroughly, removing any rust, debris, or old grease.
  3. Install New Bearings: Carefully press the new 6204 2RS and 6205 2RS bearings into their respective positions in the drum housing. Ensure they are seated correctly and evenly.
  4. Lubricate the Oil Seal: Before installing the new oil seal, apply the provided HYDRA-2 lubricant generously to the inner lip of the seal. This is crucial for reducing friction and preventing premature wear and leaks.
Detailed view demonstrating the proper method for lubricating the oil seal.
Detailed view demonstrating the proper method for lubricating the oil seal.
  1. Install New Oil Seal: Carefully install the lubricated oil seal into its housing, ensuring it is flush and properly oriented to protect the bearings from water ingress.
  2. Reassembly: Reassemble the washing machine by reversing the disassembly steps. Ensure all connections are secure and panels are correctly fitted.
  3. Testing: Before full operation, perform a test cycle (e.g., a short wash without laundry) to check for leaks, unusual noises, or vibrations.

5. Operating Instructions

This kit consists of replacement parts for a washing machine. Once correctly installed, the washing machine should operate as intended by its manufacturer. The bearings facilitate the smooth rotation of the drum, while the oil seal prevents water from reaching and damaging the bearings. No specific operating instructions apply directly to these parts beyond their proper installation.

6. Maintenance

The bearings and oil seal in this kit are designed for long-term performance once installed correctly. The primary maintenance consideration for these components is ensuring proper lubrication of the oil seal during installation. The provided HYDRA-2 lubricant is formulated for this purpose. No further routine maintenance is typically required for these specific parts after installation, as they are sealed units.

7. Troubleshooting

If issues arise after the installation of the bearing and seal kit, consider the following common problems and potential causes:

  • Loud Noise/Grinding: This often indicates improper bearing installation, damaged bearings (during installation), or an issue with the drum shaft itself. Ensure bearings are fully seated and not damaged.
  • Water Leakage: Leaks around the drum shaft area typically point to an improperly installed or damaged oil seal. Verify the seal's orientation, ensure it is flush, and confirm adequate lubrication was applied.
  • Vibration: Excessive vibration can be caused by unbalanced drum components, but also by improperly seated bearings or a bent drum shaft.

If these issues persist, it is strongly advised to consult a professional appliance repair technician.

8. User Tips

  • Cleanliness is Key: During installation, ensure the work area and all components are meticulously clean to prevent dirt or debris from compromising the new bearings and seal.
  • Gentle Handling: Bearings and seals are precision components. Avoid using excessive force or impact tools directly on the bearing races or seal lips during installation, as this can cause damage.
  • Verify Compatibility: Always double-check the model number of your washing machine and the specifications of the kit to ensure full compatibility before starting the repair.

9. Warranty and Support

For any questions regarding the product, installation, or potential defects, please contact the seller directly through the platform where the purchase was made. Keep your order details and any relevant product information handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.