1. Introduction
Thank you for choosing the feyree EVSE Wallbox EV Charger. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before using the product and retain it for future reference.
This charging station is designed for reliable and fast charging of electric vehicles equipped with a Type 2 IEC62196-2 standard charging port. It offers a 7KW single-phase charging solution with a 32A current capacity and a 5-meter cable.
2. Important Safety Information
WARNING: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Waterproof Protection: The unit has an IP65 rating, allowing for normal operation in rainy conditions.
- Temperature Protection: Features intelligent temperature protection. Charging stops automatically if the internal temperature reaches 85°C and resumes when it drops to 65°C.
- Overcurrent Protection: Protects against excessive current flow.
- Over-voltage Protection: Safeguards against voltage surges.
- Under-voltage Protection: Protects against insufficient voltage.
- Grounding Protection: Ensures proper electrical grounding for safety.
- Overload Protection: Prevents damage from excessive load.
- Short Circuit Protection: Automatically disconnects power in case of a short circuit.
- Leakage Protection: Detects and prevents electrical leakage.
- Lightning Protection: Provides protection against lightning strikes.
- Low Temperature Protection: Ensures safe operation in cold environments.
In case of emergency, press the red reset button on the side of the unit to immediately turn off the device.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.
- feyree EVSE Wallbox EV Charger Unit with integrated 5m cable (Type 2 IEC62196-2 plug)
- Wall mounting screws and anchors
- EV Charger Holder (free gift)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Charging Type | Type2 IEC62196-2 |
| Current | 32A |
| Phase | 1 Phase |
| Capacity | 7KW |
| Voltage | 220V ±20% |
| Cable | 3G 6mm² + 1x0.5mm² |
| Protection Degree | IP65 |
| Operating Temperature | -30°C to +55°C |
| Cable Length | 5m |
| Dimensions (H x W x D) | 239mm x 151mm x 78mm |
| Standby Power Consumption | As low as 3W |
| Material | Copper alloy, silver plating (pins), TPU (cable insulation), Aluminum alloy body |
5. Installation
IMPORTANT: Installation must be carried out by a certified electrician to ensure compliance with all safety standards and local electrical codes.
- Choose Location: Select a suitable indoor or outdoor location for the charging station. Ensure it is a flat, stable surface, preferably a wall, and within reach of your vehicle's charging port. The unit is designed for indoor/outdoor use in any climate.
- Mounting: Use the provided mounting screws and anchors to securely attach the charging station to the wall. Ensure the mounting surface can support the weight of the unit and the cable.
- Electrical Connection: The charger requires a single-phase 220V ±20% power supply. The electrician will connect the charger to your electrical panel, ensuring proper grounding and circuit protection.
- Cable Management: After installation, use the provided EV charger holder to neatly store the charging cable and plug when not in use. This prevents damage and keeps the area tidy.
6. Operation
The feyree EVSE Wallbox EV Charger is designed for simple and straightforward use, featuring a button start mode without the need for an app or RFID cards.
- Connect to Vehicle: Open the charging port cover on your electric vehicle. Take the Type 2 plug from the charging station and firmly insert it into your vehicle's charging port.
- Start Charging: Press the start button on the charging station. The indicator light will illuminate, indicating that charging has begun.
- Monitor Charging: The charging process is automatic. The device will automatically power off once your vehicle's battery is fully charged.
- Stop Charging (Emergency): In an emergency or if you need to stop charging manually, press the red reset button located on the side of the control box.
- Disconnect: Once charging is complete or stopped, disconnect the Type 2 plug from your vehicle.
- Store Cable: Neatly coil the charging cable and place the plug in the EV charger holder to protect it from dust and damage.
7. Maintenance
To ensure the longevity and optimal performance of your feyree EVSE Wallbox EV Charger, follow these maintenance guidelines:
- Regular Cleaning: Periodically wipe the exterior of the charging station and the cable with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Inspect Cable and Plug: Regularly check the charging cable and plug for any signs of wear, cuts, or damage. Do not use the charger if the cable or plug is damaged.
- Keep Socket Clean: The special socket design helps prevent dust, but occasional inspection and gentle cleaning of the EV charger interface can ensure optimal connection.
- Store Properly: Always use the EV charger holder to store the cable and plug when not in use. This protects them from environmental elements and accidental damage.
- Environmental Conditions: The charger is designed for indoor/outdoor use in various climates, including sun and rain. However, avoid prolonged exposure to extreme conditions if possible.
8. Troubleshooting
If you encounter issues with your charging station, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Red light flashing after 30 seconds of charging | Indicates an error or safety protection activation. This could be due to overcurrent, over/under voltage, overheating, leakage, or grounding fault. | 1. Disconnect the charger from the vehicle and power supply. 2. Check the charging cable and plug for any visible damage. 3. Ensure the electrical supply is stable and within the specified voltage range (220V ±20%). 4. Allow the unit to cool down if it has been operating in high temperatures. 5. Press the red reset button on the side of the control box. 6. Reconnect and attempt to charge again. If the issue persists, contact a qualified electrician or customer support. |
| Charger does not start | No power supply, incorrect connection, or internal fault. | 1. Ensure the charger is properly connected to the main power supply. 2. Verify that the circuit breaker for the charger is ON. 3. Ensure the charging plug is fully inserted into the vehicle's port. 4. Press the start button on the charger. |
| Slow charging speed | Vehicle's battery management system (BMS) limiting charge, or external factors. | 1. Check your vehicle's settings for any charging limits. 2. Ensure the charger is receiving full power from the electrical grid. |
9. User Tips
- Frequency Compatibility: This charger supports both 50 Hz (220V/230V) and 60 Hz (110V/120V) AC frequencies, making it versatile for different electrical systems.
- Simplicity of Use: The charger operates on a direct button-start system, meaning there is no need for a monitoring app or RFID cards for basic functionality. This simplifies the charging process.
- Automatic Disconnect: The charger is designed to automatically disconnect power once the vehicle is fully charged, preventing overcharging and conserving energy.
10. Warranty and Support
feyree products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or contact feyree customer support. Keep your purchase receipt as proof of purchase.
For technical assistance, troubleshooting, or any questions regarding your feyree EVSE Wallbox EV Charger, please contact feyree customer service through the official channels provided at the time of purchase.
