ORIA GM18013

Contents

ORIA Projection Alarm Clock User Manual

Model: GM18013

Introduction

Thank you for choosing the ORIA Projection Alarm Clock. This digital clock features a large LED display, time projection, adjustable brightness, and multiple alarm modes to enhance your daily routine. This manual provides detailed instructions for setup, operation, and maintenance to ensure you get the most out of your device.

Package Contents

  • 1 x ORIA Projection Alarm Clock
  • 1 x USB Power Cable (1.5m)
  • 1 x User Guide
  • 1 x CR2032 Button Cell Battery (for memory function)
ORIA Projection Alarm Clock package contents including clock, USB cable, manual, and button cell battery.
Figure 1: Package Contents

Product Overview

Familiarize yourself with the various components and controls of your alarm clock.

Diagram of ORIA Projection Alarm Clock showing front display and rear buttons. Front: Alarm clock icon, PM indicator, 12/24 hour icon. Rear buttons: DOWN, UP, SNOOZE/LIGHT, ALARM, SET, PROJECT. Also labeled are Projection lamp, Speaker, CR2032 battery compartment, and Power port.
Figure 2: Front and Rear View with Labeled Controls
  • Front Display: Shows time, alarm status, 12/24 hour format, and temperature.
  • Projection Lamp: Projects time onto a surface.
  • Buttons (Top/Rear):
    • DOWN: Adjusts values downwards, changes temperature unit.
    • UP: Adjusts values upwards, changes time format.
    • SNOOZE/LIGHT: Activates snooze, adjusts screen brightness.
    • ALARM: Sets alarm, checks alarm time, turns alarm on/off.
    • SET: Enters time setting mode.
    • PROJECT: Adjusts projection brightness.
  • Speaker: Emits alarm sound.
  • CR2032 Battery Compartment: Houses the backup battery.
  • Power Port: Connects to USB power cable.

Setup

Power Connection

  1. Connect the provided USB power cable to the power port on the back of the alarm clock.
  2. Plug the other end of the USB cable into a USB power adapter (not included) or a powered USB port.
  3. The LED screen will illuminate once power is connected.

Note: The clock requires continuous USB power for the display to remain on. A pre-installed CR2032 button cell battery provides memory backup for time and alarm settings during power outages or temporary disconnections, but does not power the main display.

Video: Demonstrates connecting the USB power cable to the alarm clock and a power source.

Operating Instructions

1. Time Setting

  1. Long press the "SET" button to enter time setting mode.
  2. Press "SET" again to toggle between 12-hour and 24-hour format. Use "UP" or "DOWN" to adjust.
  3. Press "SET" to adjust the hour. Use "UP" or "DOWN" to change the hour.
  4. Press "SET" to adjust the minute. Use "UP" or "DOWN" to change the minute.
  5. Press "SET" to confirm and exit time setting mode.
Video: Demonstrates setting the time on the alarm clock.

2. Alarm Setting

  1. Press the "ALARM" button to check the current alarm time. Press again to turn the alarm on/off.
  2. Long press the "ALARM" button to enter alarm setting mode.
  3. Press "ALARM" to adjust the hour. Use "UP" or "DOWN" to change the hour.
  4. Press "ALARM" to adjust the minute. Use "UP" or "DOWN" to change the minute.
  5. Press "ALARM" to set the snooze time (1-60 minutes). Use "UP" or "DOWN" to adjust.
  6. Press "ALARM" to choose the alarm mode (1-7 for everyday, 1-6 for Mon-Sat, 1-5 for Mon-Fri). Use "UP" or "DOWN" to select.
  7. Press "ALARM" to confirm and exit alarm setting mode.
Image showing three alarm modes: 1-5 (Monday to Friday), 1-6 (Monday to Saturday), and 1-7 (Everyday).
Figure 3: Available Alarm Modes
Video: Demonstrates setting the alarm on the alarm clock.

3. Screen Brightness Adjustment

Press the "SNOOZE/LIGHT" button repeatedly to cycle through 4 levels of screen brightness: Bright, Medium, Low, and OFF. The screen will automatically dim from 18:00 to 7:00 in night mode, which can be customized.

Image showing four levels of screen brightness: Bright Light, Medium Light, Low Light, and OFF.
Figure 4: Adjustable Screen Brightness Levels
Video: Demonstrates adjusting the screen brightness.

4. Projection Brightness Adjustment

Press the "PROJECT" button repeatedly to cycle through 3 levels of projection brightness: Bright, Low, and OFF. The time can be projected onto the ceiling or wall from 1.6 to 16 feet (0.5 to 5 meters).

Image showing projection distance from 1.6ft-16ft, 180° flip projection, and three levels of projection brightness.
Figure 5: Projection Features and Brightness Levels
Video: Demonstrates adjusting the projection brightness.

5. Snooze Function

When the alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. This will provide an extra 5 minutes (default) of sleep. The snooze duration can be set between 1 and 60 minutes during alarm setup.

Image showing a person sleeping with the alarm clock displaying 6:30 and a 'SNOOZE LIGHT' button, indicating the easy snooze function.
Figure 6: Easy Snooze Function

6. Temperature Display

The clock displays the indoor temperature. Press the "DOWN" button to switch between Celsius (°C) and Fahrenheit (°F).

Maintenance

  • Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Keep the device away from water and high humidity.
  • Avoid exposing the clock to direct sunlight or extreme temperatures.
  • Ensure the projection lens is clean for clear time projection.

Troubleshooting

  • Display is off: Ensure the USB power cable is securely connected to both the clock and a power source. The clock requires continuous USB power for the display to be on.
  • Projection is upside down: The projector clock is designed to project towards the back. If projected forward, the numbers will appear upside down. Adjust the clock's orientation or the projection angle accordingly.
  • Time/Alarm settings lost after power disconnection: Check if the CR2032 button cell backup battery is correctly installed and has sufficient charge. This battery saves settings during power interruptions.
  • Alarm not sounding: Ensure the alarm is turned on (check the alarm icon on the display) and the volume is not set to zero (if applicable, though not explicitly mentioned for this model, it's a common alarm clock issue). Verify the alarm time and mode are correctly set.
  • Projection is blurry: Adjust the focus of the projection lens by rotating it gently. Ensure the projection surface is within the optimal distance of 1.6 to 16 feet (0.5 to 5 meters).

Specifications

FeatureDetail
Brand NameORIA
Model NumberGM18013
TypeAlarm Clocks
Display TypeDIGITAL (LED)
Motivity TypeDigital
Screen TypeLED
FormSingle Face
FunctionProjection, Temperature Display, Snooze
StyleModern Style
Length195mm (7.7 inches)
Height63.5mm (2.5 inches)
Weight120g
OriginMainland China
Battery IncludedNo (CR2032 for backup only)
Is Smart DeviceNo
High-concerned chemicalNone
Package Length20 cm
Package Width4 cm
Package Height8 cm
Package Weight0.21 kg
Image showing the dimensions of the alarm clock: 7.7 inches length and 2.5 inches height, along with icons for Time & Alarm, 12/24H, Snooze, Projection function, 4-level brightness, and Temperature.
Figure 7: Product Dimensions and Key Features

User Tips

  • For optimal projection clarity, ensure the projection surface is smooth and free from obstructions.
  • Experiment with different projection distances and brightness levels to find what works best for your room.
  • Utilize the weekday alarm modes to avoid unnecessary alarms on your days off.
  • Keep the USB power connected to maintain continuous display and avoid relying solely on the backup battery for daily operation.

Warranty and Support

For any issues with product operation, function, or if the product is defective or damaged, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific warranty terms and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.