PowMr POW-HVM4.2M-24V-N

Contents

PowMr 4.2KW 24V MPPT Hybrid Solar Inverter Instruction Manual

Model: POW-HVM4.2M-24V-N

1. Introduction

This document provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the PowMr 4.2KW 24V MPPT Hybrid Solar Inverter. This multi-function inverter/charger combines the capabilities of an inverter, solar charger, and battery charger to deliver uninterrupted power. It features a user-friendly LCD display for configuring settings such as battery charging current, AC/solar charger priority, and acceptable input voltage ranges, adapting to various application needs.

2. Key Features

  • Pure sine wave inverter output.
  • Configurable input voltage range for home appliances and personal computers via LCD settings.
  • Configurable battery charging current based on applications via LCD settings.
  • Configurable AC/Solar Charger priority via LCD settings.
  • Compatible with mains voltage or generator power.
  • Automatic restart upon AC recovery.
  • Comprehensive protection: Overload, Over temperature, and Short circuit protection.
  • Smart battery charger design for optimized battery performance.
  • Cold start function.
  • Suitable for both grid-connected and off-grid applications.
  • Dual AC Output for enhanced power supply stability.
  • MPPT tracking voltage range: 60-500VDC.
  • Maximum charging current: 120A (AC charger plus solar charger).
  • Rated output power: 4.2KW.
  • Supports WIFI monitoring (for models with WIFI).

3. Product Overview and Components

The PowMr 4.2KW 24V MPPT Hybrid Solar Inverter is designed for robust performance and ease of use. Below are visual representations and descriptions of the unit and its functionalities.

Video: Unboxing and overview of the PowMr 4.2KW 24V MPPT Hybrid Solar Inverter, highlighting its features and components.

PowMr 4.2KW 24V MPPT Hybrid Solar Inverter front view with key features

Image: Front view of the PowMr 4.2KW 24V MPPT Hybrid Solar Inverter, showcasing its 230Vac output, 4.2KW 24V pure sine wave, 120A charge current, and 60-500VDC PV array voltage range. Also indicates EU stock availability and 1-year warranty.

PowMr 4.2KW 24V MPPT Hybrid Solar Inverter dimensions and specifications

Image: Detailed view of the inverter with dimensions (approximately 16.65in H x 13.15in W x 4.33in D) and key specifications: 4200W MPPT Hybrid Inverter, 230Vac±5% output, 120A Max. Charge Current, 6200W Max. PV Array Power, 60VDC-450VDC PV Array MPPT Voltage Range. Supports Pure Sine Wave, 50/60Hz Auto, and Lithium/Lead-Acid batteries.

Hybrid Power System diagram for PowMr Solar Inverter

Image: Diagram illustrating the Hybrid Power System. The inverter connects to Solar Power (Max. VOC: 500V DC, PV Array MPPT Voltage Range: 60-450V DC, Max. PV Array Power: 6200W), Utility, and/or a Generator. It charges a 24V Lithium or Lead-Acid battery and provides single-phase 230V output to home appliances.

Charging and Output Modes for PowMr Solar Inverter

Image: Diagram showing four charging modes (Solar first, Utility first, Solar and Utility, Only Solar) and three load output working modes (Utility first, Solar first, SBU first).

Battery compatibility and charging current for PowMr Solar Inverter

Image: Illustration of battery compatibility and charging current. The inverter supports GEL, FLD, LI-ion, and USER-defined 24V battery types. Max Charging Current (AC+PV) is 120A, configurable from 10-120A (default 60A).

360-degree protection features of PowMr Solar Inverter

Image: Diagram highlighting the 360-degree protection features: Short Circuit Protection, Over Current Protection, Over Voltage Protection, Under Voltage Protection, Over-Load Protection, Backfill Protection, Over-Temperature Protection, and Over Charge Protection.

Various views of the PowMr Solar Inverter

Image: Multiple product views showing the front, back, top, and side panels of the inverter, including connection ports for AC IN, MAIN OUT, SECOND OUT, COMM, BATTERY, and PV IN.

Multiple Charging and Output Modes for PowMr Solar Inverter

Image: Detailed diagram of multiple charging and output modes. Three Battery Charging Modes: Solar priority, Solar+Utility, Only solar. Output Modes: Solar priority, Utility priority, SBU mode.

Battery compatibility for PowMr Solar Inverter

Image: Visual representation of battery compatibility, showing support for AGM, GEL, FLD, LI, SLD, and USER-defined battery types. Notes that setting battery type to LIB activates lithium batteries by solar energy after 3 seconds.

4. Specifications

Detailed technical specifications for the PowMr 4.2KW 24V MPPT Hybrid Solar Inverter are provided in the tables below.

Table 1: Line Mode Specifications

ParameterSpecification
INVERTER MODELPOW-HVM4.2M-24V-N
Input Voltage WaveformPure Sine Wave (Utility or Generator)
Nominal Input Voltage230Vac
Max AC Input Voltage300Vac
Efficiency (Line Mode)>95% (Rated R load, battery full charged)
Transfer Time10ms typical (UPS); 20ms typical (Appliances)

Table 2: Inverter Mode Specifications

ParameterSpecification
Rated Output Power4.2KW
Output Voltage WaveformPure Sine Wave
Output Voltage Regulation230Vac±5%
Output Frequency50HZ/60HZ
Peak Efficiency0.93
Overload Protection3s@≥150% load; 5s@101%~150% load
Surge Capacity2* rated power for 5 seconds
Nominal DC Input Voltage24Vdc
Cold Start Voltage23.0Vdc
No Load Power Consumption30W

Table 3: Charge Mode Specifications

Utility Charging Mode

ParameterSpecification
Charging Algorithm3-Step
AC Charging Current (Max)100A

MPPT Solar Charging Mode

ParameterSpecification
Max. PV Array Power6200W
Nominal PV Voltage240Vdc
PV Array MPPT Voltage Range60Vdc~450Vdc
Max. PV Array Open Circuit Voltage500Vdc
Max Charging Current (AC charger plus solar charger)120A

Table 4: Two Load Output Power

ParameterSpecification
Full Load4200W
Maximum Main Load4200W
Maximum Second Load (battery model)1400W
Main Load Cut Off Voltage26VDC
Main Load Return Voltage27VDC

5. Setup Instructions

Proper installation is crucial for the safe and efficient operation of your PowMr Hybrid Solar Inverter. Please follow these steps carefully.

5.1 Safety Precautions

  • Ensure all power sources (AC, PV, Battery) are disconnected before installation or maintenance.
  • Only qualified personnel should perform electrical installations.
  • Wear appropriate personal protective equipment (PPE).
  • Verify correct polarity for all DC connections.
  • Ensure adequate ventilation around the inverter.

5.2 Mounting the Inverter

The inverter should be mounted vertically on a sturdy, non-flammable surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure there is sufficient clearance around the unit for airflow.

  • Mark the mounting points on the wall using the inverter's dimensions (approx. 300x100x400 mm or 16.65in H x 13.15in W x 4.33in D).
  • Drill appropriate holes and insert wall anchors if necessary.
  • Securely fasten the inverter to the wall using suitable screws.

5.3 Wiring Connections

Refer to the connection diagram below and the labels on the inverter's back panel for accurate wiring.

Back panel connections of PowMr Solar Inverter

Image: Rear view of the inverter showing connection terminals: AC IN (L, N), MAIN OUT (L, N), SECOND OUT (L, N), COMM port (RJ45), Battery terminals (+, -), and PV IN terminals (+, -).

  1. Battery Connection: Connect the battery cables to the BATTERY terminals (+ and -). Ensure correct polarity. The inverter is compatible with Lifepo4, Lithium, and Lead-Acid batteries (24Vdc nominal).
  2. PV Array Connection: Connect the solar panel array cables to the PV IN terminals (+ and -). Ensure the PV array voltage is within the MPPT range of 60Vdc-450Vdc and the open circuit voltage does not exceed 500Vdc.
  3. AC Input Connection: Connect the AC utility grid or generator power to the AC IN terminals (L and N).
  4. AC Output Connection: Connect your loads to the MAIN OUT and SECOND OUT terminals (L and N). The inverter provides dual AC outputs.
  5. Communication (COMM) Port: Use the RJ45 port for communication, potentially for WIFI monitoring or other external devices.
  6. Grounding: Ensure the inverter is properly grounded according to local electrical codes.

5.4 Initial Power-Up

  1. After all connections are secure and verified, switch on the battery breaker.
  2. Switch on the PV array breaker (if applicable).
  3. Switch on the AC input breaker (if applicable).
  4. Finally, switch on the inverter's power button.
  5. Observe the LCD display for status indicators and any error messages.

6. Operating Instructions

The inverter's LCD display and buttons allow for easy configuration and monitoring of its operation.

6.1 LCD Display and Button Operation

The comprehensive LCD display provides real-time information and allows access to various settings. Use the buttons (typically UP, DOWN, ENTER, ESC) to navigate menus and adjust parameters.

  • Monitoring: View input/output voltage, current, frequency, battery status, and load percentage.
  • Settings: Access menus to configure charging current, charger priority, output priority, and other system parameters.

6.2 Configurable Settings

The inverter offers several user-configurable settings to optimize performance for your specific setup.

  • Battery Charging Current: Adjust the maximum charging current (10-120A) to suit your battery bank's specifications and desired charging speed.
  • AC/Solar Charger Priority:
    • Solar First: Prioritizes solar power for charging batteries and supplying loads.
    • Utility First: Prioritizes AC utility power for charging and loads.
    • Solar and Utility: Uses both solar and utility for charging.
    • Only Solar: Charges only from solar power.
  • Output Source Priority (Load Output Working Modes):
    • Utility First: Loads are primarily powered by the utility grid.
    • Solar First: Loads are primarily powered by solar energy.
    • SBU Mode (Solar-Battery-Utility): Loads are powered by solar, then battery, then utility as a last resort.
  • Input Voltage Range: Select between a narrow range for sensitive electronics (UPS mode) or a wider range for appliances (APL mode).
  • Battery Type: Configure the inverter for the specific battery chemistry (GEL, FLD, LI-ion, USER). For Lithium batteries, ensure the correct setting for activation.

6.3 Cold Start Function

The cold start function allows the inverter to be powered on directly from the battery without an AC input, useful in off-grid scenarios or during power outages.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter, especially the ventilation openings, to prevent dust buildup and ensure proper heat dissipation. Use a dry, soft cloth. Do not use liquid cleaners.
  • Connection Inspection: Annually inspect all electrical connections (AC, DC, battery, PV) for tightness, corrosion, or damage. Tighten any loose connections.
  • Battery Maintenance: Follow the manufacturer's recommendations for your specific battery type. This may include checking electrolyte levels (for flooded lead-acid batteries), terminal cleaning, and periodic capacity testing.
  • Environmental Check: Ensure the installation environment remains within the specified temperature and humidity ranges.

8. Troubleshooting

This section provides guidance on common issues you might encounter with your inverter. For more complex problems, contact technical support.

8.1 Common Issues and Solutions

ProblemPossible CauseSolution
Inverter does not power onNo battery connection, low battery voltage, faulty power button.Check battery connections and voltage. Ensure battery breaker is ON. Press power button firmly.
No AC outputOverload, short circuit, over-temperature, battery low, AC input fault.Reduce load. Check for short circuits. Allow inverter to cool. Check battery voltage. Verify AC input.
Battery not charging from solarPV array disconnected, low PV voltage, incorrect MPPT settings, solar charger priority not set.Check PV connections. Verify PV voltage is within range. Check LCD settings for solar charger priority.
Battery not charging from ACAC input disconnected, AC input voltage out of range, incorrect AC charger priority.Check AC input connections. Verify AC input voltage. Check LCD settings for AC charger priority.
Overload warning/shutdownConnected load exceeds inverter capacity.Reduce the total load connected to the inverter. Restart the inverter if it shut down.
Over-temperature warning/shutdownInsufficient ventilation, high ambient temperature, blocked fan.Ensure adequate clearance around the inverter. Clean ventilation openings. Relocate if ambient temperature is too high.

8.2 Error Codes (General Guidance)

The LCD display may show specific error codes. Consult the full user manual (if available) for a complete list and their meanings. Generally, error codes indicate specific faults such as over-voltage, under-voltage, over-current, or internal system errors. Record the error code and contact support if the issue persists after basic troubleshooting.

9. Warranty and Support

Your PowMr Hybrid Solar Inverter comes with a commitment to quality and customer satisfaction.

  • Warranty: This product includes a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
  • Free Returns: Enjoy free returns within 15 days of delivery.
  • Fast Delivery Guarantee: The product is eligible for fast delivery. In case of delayed delivery, a $1.00 coupon code may be provided. Refunds are also available if the package is lost or items are damaged during transit.
  • Security & Privacy: PowMr ensures safe payments and secure handling of personal details, not sharing them with third parties without consent.
  • Technical Support: For technical assistance, warranty claims, or any operational questions not covered in this manual, please contact PowMr customer support through your purchase platform or the official PowMr website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.