FGHGF Mic6 Microphone Array MSM261S4030H0

Contents

Mic6 Microphone Array Sound Source Location Tracking Module Expansion Board User Manual

Model: Mic6 Microphone Array MSM261S4030H0

1. Introduction

The Mic6 Microphone Array Module is an advanced expansion board designed for sound source localization, speech recognition, and beamforming applications. It is built around the MSM261S4030H0 digital microphone chip and features a ring array of 12 SK9822 LEDs for visual feedback. This module offers high voice recognition sensitivity and an excellent signal-to-noise ratio, making it suitable for various AI and audio processing projects.

2. Package Contents

Before you begin, please verify that all items listed below are included in your package:

  • 1 x Mic6 Microphone Array Module
  • 1 x Flexible Flat Cable (FPC)
  • 1 x DuPont Line (Female-to-female)
  • 4 x Screw + Nut set
Package contents including the microphone array, flexible flat cable, DuPont line, and screws/nuts.
Figure 2.1: Contents of the Mic6 Microphone Array Module package.

3. Setup and Connections

This section details the physical components and wiring instructions for the Mic6 Microphone Array Module.

3.1 Module Components

Diagram of the Mic6 Microphone Array Module with labeled components: 1. MEMS Mic, 2. SK9822 LED, 3. 10P FPC interface, 4. Level shift.
Figure 3.1: Key components of the Mic6 Microphone Array Module.

The module features:

  • MEMS Mics: 7 MSM261S4030H0 digital microphones for audio input.
  • SK9822 LEDs: 12 individually addressable LEDs arranged in a ring for visual feedback.
  • 10P FPC Interface: A flexible flat cable connector for data and power.
  • Level Shift: Circuitry for voltage level conversion.

3.2 Pin Definition

Understanding the pinout is crucial for proper connection to your development board.

Table showing module pin definitions: Pin serial number, Pin Name (VIN, GND, MIC_D0-D3, MIC_WS, MIC_CK, LED_CK, LED_DA), Type, and Pin description.
Figure 3.2: Module Pin Definitions.
Table 3.1: Module Pin Definitions
Pin No.Pin NameTypePin Description
1VINVCCModule power input positive
2GNDGModule power ground
3MIC_D0I/OSerial data output of I2S interface of microphone 0 and microphone 1
4MIC_D1I/OSerial data output of I2S interface of No. 2 microphone and No. 3 microphone
5MIC_D2I/OSerial data output of I2S interface of No. 4 microphone and No. 5 microphone
6MIC_D3I/OSerial data output of the I2S interface of the center microphone
7MIC_WSI/OSerial Data word selection for I2S interface
8MIC_CKI/OSerial Data clock for I2S interface
9LED_CKI/OLED IC interface serial data clock
10LED_DAI/OSerial data output of LED I/C interface

3.3 Wiring Instructions

Connect the Mic6 Microphone Array Module to your development board using the provided flexible flat cable and DuPont lines according to the following wiring diagram and pin definitions.

Wiring mode table showing connections between Microphone Array pins (VIN, GND, LED_CK, LED_DA, MIC_D0-D3, MIC_WS, MIC_CK), Corresponding pins on the Development Board (3.3v/5v, GND, I/O), and Parameters in the code (sk9822_clk, sk9822_dat, i2s_d0-d3, i2s_ws, i2s_sclk).
Figure 3.3: Wiring Mode Diagram.
Table 3.2: Wiring Mode
Microphone ArrayCorresponding pins on the Development BoardParameters in the code
VIN3.3v/5v—
GNDGND—
LED_CKI/Osk9822_clk
LED_DAI/Osk9822_dat
MIC_D0I/Oi2s_d0
MIC_D1I/Oi2s_d1
MIC_D2I/Oi2s_d2
MIC_D3I/Oi2s_d3
MIC_WSI/Oi2s_ws
MIC_CKI/Oi2s_sclk

Power Supply: The module requires a 5V power supply at 800mA. Ensure your development board or external power source can provide sufficient current.

Image showing the Mic6 Microphone Array Module connected to a flexible flat cable, illustrating a typical connection scenario.
Figure 3.4: Module connected via Flexible Flat Cable.

4. Operating Instructions

The Mic6 Microphone Array Module is designed for advanced audio processing tasks, primarily focusing on sound source localization and speech recognition.

4.1 Core Functionality

  • Sound Source Localization: The array of 7 MEMS microphones allows for determining the direction of incoming sound.
  • Speech Recognition Beamforming: By processing signals from multiple microphones, the module can enhance speech clarity and reduce noise from other directions.
  • High Sensitivity: The MSM261S4030H0 chips provide high sensitivity and signal-to-noise ratio for accurate audio capture.

4.2 LED Array (SK9822)

The 12 SK9822 LEDs form a ring array, providing visual feedback. These LEDs are cascaded through dual signal lines and offer:

  • 8-Bit (256 level) adjustable color.
  • 5-Bit (32 level) brightness adjustment.

This allows for dynamic visual indicators, such as showing the detected sound direction or system status.

4.3 Software Development

To utilize the full capabilities of the Mic6 module, software development is required. The module supports various development environments and programming languages:

  • Maix Py: Provides an interface to operate the microphone array, simplifying integration.
  • Development Environments: Maixpy IDE, Platformio IDE, Arduino IDE.
  • Programming Languages: C, C++, Micropython.

Refer to the specific documentation for your chosen development environment and programming language for detailed API usage and examples.

5. Maintenance

To ensure the longevity and optimal performance of your Mic6 Microphone Array Module, follow these general maintenance guidelines:

  • Handle with Care: This is a sensitive electronic component. Avoid dropping or subjecting it to physical shock.
  • Keep Dry: Protect the module from moisture and liquids. Water damage can lead to irreversible malfunction.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, store the module in an anti-static bag in a cool, dry environment.
  • Power Off Before Connecting/Disconnecting: Always ensure the power supply is disconnected before making or changing any electrical connections to prevent short circuits or damage.

6. Troubleshooting

If you encounter issues with your Mic6 Microphone Array Module, consider the following troubleshooting steps:

  • No Power/Module Not Responding:
    • Check all power connections (VIN, GND) to ensure they are secure and correctly polarized.
    • Verify that your power supply provides the required 5V and sufficient current (800mA).
    • Inspect the FPC cable for any damage or improper seating.
  • No Audio Input/Incorrect Readings:
    • Double-check the I2S data (MIC_D0-D3), word select (MIC_WS), and clock (MIC_CK) connections to your development board.
    • Ensure your software configuration matches the I2S parameters (e.g., clock frequency, data format).
    • Confirm that the microphones are not physically obstructed.
  • LEDs Not Functioning/Incorrect Display:
    • Verify the LED data (LED_DA) and clock (LED_CK) connections.
    • Check your software code for correct SK9822 LED control protocols (e.g., proper data transmission, color, and brightness values).
    • Ensure the power supply is stable, as LEDs can be sensitive to voltage fluctuations.
  • Software/Firmware Issues:
    • Ensure you are using the correct libraries and drivers for your development environment and board.
    • Consult the documentation for Maix Py, Platformio IDE, or Arduino IDE for common issues and solutions related to microphone arrays and LED control.
    • Try running example code provided by the module's manufacturer or community to isolate software-related problems.

If problems persist after following these steps, contact the seller for further assistance.

7. Specifications

Table 7.1: Technical Specifications
FeatureSpecification
MEMS Microphone Array7 x MSM261S4030H0 digital microphones
Sound Pressure Level (SPL)140 dB SPL
Sensitivity-26 dB (dBFS@1kHz, 1Pa)
Signal-to-Noise Ratio (SNR)57 dB (20 kHz bandwidth, A-weighted)
Total Harmonic Distortion (THD)< 1% (100dB SPL @1 KHz, S=Nom, Rload > 2k)
Clock Frequency1.0-4.0 MHz (normal mode); 150-800 kHz (low power consumption mode)
LEDs12 x SK9822 LEDs (8-Bit color, 5-Bit brightness)
Connectors2 x 5P 2.54mm terminal, 10P 0.5mm FPC connector
Supply Voltage5V @ 800mA
Dimensions78.1 x 88.8 mm
MaterialPCB
ColorBlack
Development EnvironmentsMaixpy IDE, Platformio IDE, Arduino IDE
Programming LanguagesC, C++, Micropython

8. User Tips

  • Stable Power Supply: Always use a stable and sufficient power supply (5V, 800mA) to prevent unexpected behavior or damage, especially when driving the LEDs.
  • Software Libraries: Leverage existing software libraries and examples for Maix Py or your chosen IDE to accelerate development and ensure correct interaction with the module's microphones and LEDs.
  • Environmental Considerations: For optimal sound capture, operate the module in a quiet environment and avoid placing it near sources of electromagnetic interference.
  • FPC Cable Handling: Be gentle when connecting and disconnecting the Flexible Flat Cable (FPC) to avoid damaging the delicate connector or the cable itself.
  • Experiment with LEDs: The SK9822 LEDs offer extensive customization. Experiment with different color patterns and brightness levels to create intuitive visual feedback for your applications.

9. Warranty and Support

For any technical support, warranty claims, or further inquiries regarding the Mic6 Microphone Array Module, please contact the seller directly through the platform where the product was purchased. Provide your order details and a clear description of the issue to facilitate a quicker resolution.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.