UGREEN CM383/CM477

Contents

UGREEN USB External Sound Card Audio Adapter

Models: CM383 / CM477

Introduction

The UGREEN USB 2-in-1 Sound Card Audio Adapter is designed to provide an external audio solution for devices with a broken sound card or a single audio jack. It easily adds a 3.5mm TRRS port (integrated audio-in and audio-out interface) to your Laptop, PC, PS4, PS5, or Nintendo Switch via an available USB interface, restoring audio functionality without the need for costly repairs.

UGREEN 2-in-1 USB Sound Card Audio Adapter
UGREEN 2-in-1 USB Sound Card Audio Adapter

Key Features

  • 2-in-1 Functionality: Integrates audio-in (microphone) and audio-out (headphone) into a single 3.5mm TRRS jack.
  • Universal Compatibility: Plug and play with Windows, Mac OS, Linux, Chrome OS, PS4, PS5, Nintendo Switch, Laptops, PCs, and Smartphones (with OTG support).
  • High-Quality Audio: Built-in SSS1700 smart chip ensures minimal distortion and clear sound with a SNR of >95dB.
  • Ultra-Slim Design: At 18mm width, it fits snugly without blocking adjacent USB ports.
  • Durable Construction: Features an aluminum unibody case that is ultra-compact, light, oxidation-resistant, and scratch-resistant.
  • Driver-Free Installation: No additional drivers required for most operating systems.
Close-up of UGREEN sound card highlighting aluminum unibody case, compact size, oxidation resistance, and scratch resistance.
Durable Aluminum Unibody Case
Internal view of the UGREEN sound card showing the SSS1700 chip and emphasizing good sound quality.
Advanced SSS1700 Smart Chip for Superior Sound

Compatibility

The UGREEN USB External Sound Card is designed for broad compatibility:

  • Operating Systems: Windows, Mac OS, Linux, Chrome OS, iOS, Android.
  • Devices: Laptops, Desktop PCs, PS5, PS4, Nintendo Switch, Raspberry Pi 4, Smartphones (with OTG function).
  • Audio Peripherals: Headphones, Microphones, Speakers, Earphones with a 3.5mm TRRS interface.

It supports automatic recognition of both CTIA (American Standard) and OMTP (National Standard) headsets.

Diagram illustrating universal compatibility with Windows, Mac OS, Linux, PS4/PS5, PC, Laptop, Raspberry Pi 4, and various audio peripherals like headphones, microphones, speakers, and earphones.
Universal Compatibility Overview
Diagram showing the pin configurations for American Standard (CTIA) and National Standard (OMTP) 3.5mm TRRS jacks, detailing left channel, right channel, ground line, and microphone connections.
CTIA and OMTP Standard Headset Compatibility

Setup Instructions

The UGREEN USB External Sound Card is designed for plug-and-play functionality, requiring no additional drivers for most systems.

  1. Connect to USB Port: Insert the USB-A male connector of the sound card into an available USB port on your computer, game console, or smartphone (with OTG adapter).
  2. Connect Audio Device: Plug your 3.5mm TRRS headset, earphones, or microphone into the 3.5mm TRRS female port on the sound card.
  3. System Recognition: Your operating system should automatically detect the new audio device.
  4. Configure Audio Settings (if necessary): In your computer's sound settings or control panel, ensure the UGREEN USB Audio Device is selected as the primary playback and recording device.
UGREEN sound card connected to a laptop with earphones, demonstrating TRRS compatibility.
Connecting the Sound Card to a Laptop

Operation

Once connected and recognized by your system, the UGREEN USB External Sound Card functions as your primary audio input and output device.

  • Audio Playback: All audio from your device will be routed through the sound card to your connected headphones or speakers.
  • Microphone Input: Your connected microphone will be used for audio input, such as for calls, gaming, or recording.
  • Volume Control: Adjust volume directly on your computer or through your connected audio device.
User playing a video game on a PS4/PS5 with the UGREEN sound card connected, demonstrating its wide application for gaming.
Gaming with the UGREEN Sound Card on PS4/PS5

Maintenance

To ensure the longevity and optimal performance of your UGREEN USB External Sound Card:

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
  • Store in a safe place when not in use to prevent physical damage.
User placing the compact UGREEN sound card into a wallet, illustrating its portability.
Compact and Portable Design for Easy Storage

Troubleshooting

If you encounter issues with your UGREEN USB External Sound Card, please refer to the following solutions:

  • Device Not Recognized (Windows):
    1. Check "Device Manager" to see if the sound card is recognized.
    2. If it appears as an unknown device, try updating the driver online.
    3. Consider using driver repair software if issues persist.
  • No Audio/Microphone Function:
    1. Ensure the USB audio adapter is set as the primary playback and recording device in your system's sound settings.
    2. Verify that your headset uses a 3.5mm TRRS interface. This adapter does not work with headsets that have separate 3.5mm ports for headphone and microphone.
    3. The external sound card will only be displayed on the computer when a headset is connected.
  • Compatibility Issues:
    • PS3: This adapter does not work with PS3, as its USB interface does not carry an audio signal.
    • PS4/PS5: For PS4/PS5, the output sound for the Left and Right channels may be reversed. This is due to the adapter's higher sampling rate (192K/24BIT) compared to PS4/PS5 compatibility (48K/16BIT).
    • Smartphones: Ensure your smartphone supports the OTG (On-The-Go) function for the adapter to work correctly.
    • TV/Car: This adapter is not designed for use with TVs or cars.
  • General Troubleshooting:
    • Try connecting the sound card to a different USB port.
    • Test the sound card with another compatible device to rule out device-specific issues.
    • Test with a different headset to ensure the issue is not with your audio peripheral.
Visualizing common audio problems the sound card solves: damaged original sound card, PS4/PS5 inability to connect external audio, and single-hole laptops not supporting microphones.
Common Audio Problems Solved by the UGREEN Sound Card

Specifications

Feature Detail
Product Name UGREEN 2-in-1 Sound Card Audio Adapter
Model CM383 / CM477
Chip SSS1700
SNR (Signal-to-Noise Ratio) >95dB
Sampling Rate (Microphone Input) Up to 16bit/48KHz
Sampling Rate (Headphone Output) Up to 24bit/96KHz
Frequency Response 20 - 20KHz
Driver Requirement No driver required for Windows/Mac OS/Linux/Chrome OS/iOS/Android
Computer Connector USB Male
Headset Connector 3.5mm TRRS Female
Dimensions (LxWxH) 34 x 18 x 9mm
Package UGREEN retail box
Product specification table for UGREEN 2-in-1 Sound Card Audio Adapter, detailing product name, model, chip, SNR, sampling rate, frequency response, driver, computer connector, headset connector, and compatible devices.
Detailed Product Specifications

Comparison with Other UGREEN Sound Cards

For a detailed comparison of this model with other UGREEN sound cards, refer to the table below:

Feature CM129 US205 CM383
Product Image UGREEN CM129 Sound Card UGREEN US205 Sound Card UGREEN CM383 Sound Card
Port Headphone Port, Microphone Port, 3.5mm Port Headphone Port, Microphone Port 3.5mm Port
Cable Length 15cm, 100cm 15cm / (Adapter type)
Systems Windows 10/8/8.1/7/XP, Linux, macOS, iOS, Android Windows 10/8/8.1/7/XP, Linux, macOS, Android Windows 10/8/8.1/7/XP, Linux, macOS, iOS, Android
Free Drive √ √ √
Game Console PS4, PS5, Nintendo Switch, PS4 Pro PS4, PS5, Nintendo Switch PS4, PS5, Nintendo Switch
Laptop & Desktop √ √ √
Smartphone USB-C Smartphone (Adapt OTG Adapter) USB-C Smartphone (Adapt OTG Adapter) USB-C Smartphone (Adapt OTG Adapter)
Indicator Light √ × ×
CTIA or OMTP CTIA only / CTIA & OMTP
Sampling Rate 16bit/48KHz 16bit/48KHz 16bit/48KHz (Mic), 24bit/96KHz (Headphone)

User Tips

  • For optimal sound quality, ensure your system's audio settings prioritize the UGREEN USB Audio Device.
  • When using with smartphones, confirm that your phone supports OTG functionality for proper operation.
  • If you experience reversed left/right audio channels on PS4/PS5, this is a known compatibility characteristic due to differing sampling rates.
  • The ultra-slim design is intended to prevent blocking adjacent ports; ensure it's inserted correctly to take advantage of this feature.
  • Always connect your headphones or microphone to the adapter before plugging the adapter into your computer's USB port to ensure proper detection.
Comparison showing the ultra-slim design of the UGREEN sound card (≤18mm) compared to a wider adapter (>18mm), demonstrating it won't block adjacent ports.
Ultra-Slim Design Prevents Port Blocking

Warranty and Support

UGREEN products are designed for reliability and performance. For warranty information, technical support, or further assistance, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.

For any product-related inquiries or issues not covered in this manual, please reach out to UGREEN customer support.

© 2024 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.