1. Introduction
Thank you for choosing the YTYIN 12V 28000mAh Car Jump Starter. This multi-functional device is designed to provide emergency power for jump-starting vehicles, charging digital devices, and offering illumination. It features a digital display for battery status and is built to operate in a wide range of temperatures.
This manual provides essential information for the safe and effective use of your jump starter. Please read it thoroughly before operation and keep it for future reference.
Figure 1: YTYIN 12V 28000mAh Car Jump Starter with Digital Display showing 100% charge.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- Main Jump Starter Unit (Host)
- One-for-three Charging Cable
- Battery Clip (Jumper Cables)
- Storage Box
- Instruction Manual
- Type-C Cable
Figure 2: Included items: Main unit, storage box, jumper cables, Type-C cable, and manual.
3. Specifications
| Feature | Specification |
|---|---|
| Product Name | Car Emergency Start Power Supply |
| Product Size | 20*15*8 CM |
| Starting Current | 200 A |
| Peak Current | 400 A |
| Battery Capacity | 28000mAh (20000-30000mAh range) |
| Voltage | 12 V |
| Applicable Temperature | -40°C to +65°C |
| Input Port | 5V/1A |
| Output Port | 5V/2A, 12V |
| Special Features | USB, Lighting, Cigarette Lighter Starter, Wireless Charging, Compass, Safety Hammer |
| Conversion Rate | 85%~90% |
| Number of Built-in Batteries | 4 |
| External Testing Certification | CE |
Figure 3: The 6-in-1 multi-function jump starter is compatible with Gas 6.0L, Diesel 3.0L, Motorcycles, Yachts, and can charge USB devices, offer quick charge, LED lighting, SOS, and operates in severe temperatures.
Figure 4: The jump starter supports low-temperature starting, operating effectively from -40°C to +65°C.
4. Safety Information
- Always ensure the jump starter is fully charged before use.
- Do not short-circuit the positive and negative terminals of the battery clips.
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
- Keep out of reach of children.
- Do not disassemble the device.
- Ensure proper polarity when connecting to a vehicle battery (positive to positive, negative to negative).
- Only use the provided battery clips and cables.
- This device is suitable for approximately 2.0L low diesel vehicles and 6.0L low gas vehicles.
5. Setup
5.1 Initial Charging
Before first use, please fully charge the jump starter. Connect the provided charging cable to the input port (5V/1A) on the device and a suitable power source. The digital display will indicate the charging progress.
5.2 Device Overview
Figure 5: Key components of the jump starter include a safety hammer, compass, starting car port, 12-19V output, charging mouth, 4 USB outputs, function switch, voltage display, ON/OFF switch, and emergency light.
6. Operating Instructions
6.1 Jump Starting a Vehicle
- Before starting the car, ensure all in-car electrical equipment such as air conditioning and audio are temporarily turned off.
- Connect the battery clips to the jump starter's starting car port.
- Connect the red clamp to the positive (+) terminal of the vehicle's battery.
- Connect the black clamp to the negative (-) terminal of the vehicle's battery.
- Turn on the emergency power supply (jump starter).
- Enter the car and attempt to start the engine.
- Once the car successfully starts, remove the jump starter from the vehicle battery within 30 seconds.
Video 1: Demonstration of jump starting a car, using the flashlight, charging phones, and using the integrated air compressor.
Figure 6: The jump starter is powerful enough to start Gas 6.0L, Diesel 3.0L vehicles, motorcycles, and yachts in emergencies.
6.2 Using the LED Light
- Steady Light: Press and hold the power button for 3 seconds to turn on the steady LED light.
- Slow Flash: Single-click the power button again for a slow flash mode.
- SOS Slow Flash: Single-click the power button a third time for SOS slow flash mode.
- Warning Light: Double-click the power button to activate the warning light flash (red and blue flashing).
6.3 Charging Mobile Devices
The jump starter can charge multiple mobile devices simultaneously via its USB output ports or wirelessly.
- USB Charging: Connect your device's charging cable to one of the jump starter's Output USB ports (5V/2A).
- Wireless Charging: Place your compatible smartphone on the designated wireless charging area of the jump starter.
Figure 7: The jump starter can charge multiple mobile phones simultaneously via its USB ports.
6.4 Using the Air Compressor (if included in your kit)
If your kit includes an air compressor, follow these steps to inflate tires:
- Take out the air pump from the kit.
- Connect the air pump to the emergency power supply (jump starter).
- Connect the air pump nozzle to the tire valve.
- Turn on both the emergency power supply and the air pump.
- Monitor the pressure gauge. It is recommended that the inner circle value on the gauge does not exceed 2.5 bar.
7. Maintenance
- Store the jump starter in a cool, dry place away from direct sunlight and moisture.
- Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- Clean the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure all ports are free from dust and debris.
8. Troubleshooting
8.1 Device Not Turning On
- Check if the battery is charged. Recharge if necessary.
- Ensure the ON/OFF switch is in the 'ON' position.
8.2 Vehicle Not Starting
- Verify that the battery clips are securely connected to the correct terminals (red to positive, black to negative).
- Ensure the jump starter has sufficient charge.
- Confirm that all vehicle accessories (lights, radio, AC) are turned off.
- Check if your vehicle's engine size is within the supported limits (Gas 6.0L, Diesel 3.0L).
- If the vehicle still doesn't start after a few attempts, there might be another issue with the vehicle's battery or engine.
8.3 Digital Devices Not Charging
- Ensure the jump starter is turned on.
- Check the charging cable connection to both the jump starter and your device.
- Verify your device supports wireless charging if using that feature.
9. User Tips
- For motorcycle use, the number of starts will depend on the motorcycle's battery size and the jump starter's charge level. Always ensure the jump starter is fully charged for optimal performance.
- Keep the jump starter charged and readily accessible in your vehicle for emergencies.
10. Warranty & Support
For warranty information or technical support, please refer to the seller's policies or contact their customer service directly. Keep your purchase receipt as proof of purchase.