1. Introduction
The EARUELETRIC EAST2 is an intelligent digital thermostat designed for floor heating systems, suitable for both room temperature control and household temperature management. It controls the operating status of underfloor heating equipment by comparing ambient temperature with the set temperature, enhancing comfort while promoting energy efficiency.
This digital thermostat features microcomputer control technology and a full-screen touch button display, offering an elegant, user-friendly design. It includes manual and automatic functions, programmable settings, status memory, and a child lock. The WiFi-enabled model can also display real-time weather and humidity information.

2. Specifications
| Attribute | Value |
|---|---|
| Model Number | EAST2 |
| Brand Name | EARUELETRIC |
| Power Supply | AC90-240V, 50/60Hz |
| Wattage | 100-240V |
| Sensor | NTC10kB 25/50:3950K |
| Current Load | 16A (Electric Heating) / 3A (Water Heating, resistive) |
| Accuracy | ±1℃ |
| Set Temperature Range | 5-60℃ |
| Display Range | 0-50℃ |
| Self Consumption Power | less than 1W |
| Shell Material | PC+ABS (flame retardant) |
| Screen Type | LCD |
| Floor Heating Part Type | Floor Heating Thermostats |
| Compatibility | Android / iOS (Smart Phone), All Compatible |
| Size | 86*86*40mm (Mounting box 60mm) |
| Certification | CE |
| Origin | Mainland China |


3. Package Contents
Ensure all items are present and in good condition upon unpacking:
- 1 x EARUELETRIC EAST2 Thermostat
- 1 x Sensor Probe (included only with 16A electric floor heating models, cable length: 3M)
- 2 x Mounting Screws
- 1 x User Manual
4. Safety Information
- Installation should only be performed by a qualified electrician.
- Always disconnect power at the circuit breaker before installation or maintenance.
- Ensure the power supply voltage matches the thermostat's specifications (AC90-240V).
- Do not expose the thermostat to water or excessive humidity.
- Keep out of reach of children to prevent accidental tampering.
- This device is designed for indoor use only.
5. Installation
This product is designed for installation using a standard 86-type wall mounting box, in compliance with European regulations.
- Prepare the Wall Box: Install expansion screw cartridges into the wall with a spacing of 60mm.
- Separate Covers: Use a screwdriver to carefully separate the upper and lower covers of the thermostat.
- Thread Wires: According to the wiring diagram, thread the necessary wires through the back cover to the wire slot, leaving approximately 20cm of wire for connection.
- Mount Bottom Shell: Fix the bottom shell to the wall using the provided screws.
- Connect Wires: Connect the wires to the appropriate terminals as shown in the wiring diagram.
- Secure Front Shell: Align the buckle of the front shell with a 30-degree angle and fasten it securely to the bottom shell.

6. Wiring Diagrams
Ensure correct wiring according to your heating system type. Refer to the diagram below for electric floor heating (16A) connections.

7. Initial Setup & WiFi Pairing
7.1. Power On/Off
- Press the Power button (
) to turn the thermostat ON or OFF.
7.2. WiFi Networking Operation
To connect your thermostat to the Tuya Smart Life app:
- Ensure your thermostat is powered on.
- Open the Tuya Smart Life app on your Android or iOS smartphone.
- Follow the in-app instructions to add a new device. The app will search for nearby devices.
- Once discovered, select your thermostat and enter your WiFi network credentials.
- The device will be added to your app, allowing remote control and programming.


8. Operating Instructions
8.1. Screen Descriptions

8.2. Basic Operations
- Power On/Off: Press the Power button (
) to toggle power. - Adjust Temperature: Use the Up arrow (
) and Down arrow (
) buttons to adjust the set temperature. - Energy-Saving Mode: Press the Energy-saving mode button (
) to switch between manual and energy-saving modes. This mode typically runs for one time period. - Clock Settings: Press the Clock settings button (
) to enter clock settings. Use the Up/Down arrows to adjust the time.
8.3. Programming Instructions for Time Periods
The thermostat supports programmable time periods for customized heating schedules.
Panel Settings (for non-WiFi models or manual programming)
In the off state, simultaneously press and hold the Grid icon (
) and Down arrow (
) for 5 seconds to enter programming mode. Use the Grid icon to cycle through options and Up/Down arrows to adjust values.
| Key | Option | Icon | Adjust Time | Default Value | Adjust Temperature |
|---|---|---|---|---|---|
| Workday | 1 | ![]() | 06:00 | 20℃ | ![]() |
| 2 | ![]() | 08:00 | 15℃ | ![]() | |
| 3 | ![]() | 11:30 | 15℃ | ![]() | |
| 4 | ![]() | 12:30 | 15℃ | ![]() | |
| 5 | ![]() | 17:00 | 22℃ | ![]() | |
| 6 | ![]() | 22:00 | 15℃ | ![]() | |
| Holiday | 1 | ![]() | 08:00 | 22℃ | ![]() |
| 2 | ![]() | 23:00 | 15℃ | ![]() |
App Settings (for WiFi models)
If your thermostat is equipped with WiFi, programming can be performed directly on the Tuya Smart Life app. Navigate to the programming section within the device settings to customize weekday and day-off schedules.

8.4. Timed Shutdown/Startup
- Timed Shutdown: Long press the Power button (
) in power-on mode. - Timed Startup: Long press the Power button (
) while in shutdown mode.

9. Advanced Settings
To enter advanced options settings:
- In shutdown state, simultaneously press the Grid icon (
) and Down arrow (
) for 5 seconds. - Press the Grid icon to navigate to the next option.
- Use the Up arrow (
) and Down arrow (
) to make adjustments. - Press the Power button (
) to exit Advanced Options.
| Number | Advanced Option Name | Default | Option Range |
|---|---|---|---|
| 1 | Temperature Calibration | -2℃ | -9~9℃ |
| 2 | NTC Select | IN | IN:1;OUT:2;ALL |
| 3 | High Temperature Protection | 60℃ | 5~60℃ |
| 4 | Temperature Difference Start | 0.5℃ | 0.5~10℃ |
| 5 | Low Temperature Protection | On | 0:On;1:Off |
| 6 | Time Slot Programming | 5+2 | 0:Off;1:5+2;2:6+1;3:7 |
| 7 | Maximum Set Temperature | 40℃ | 5~60℃ |
| 8 | Minimum Set Temperature | 10℃ | 5~20℃ |
| 9 | Restore Factory | - | - |
| 10 | Backlight Brightness | 01 | 0~08 |
| 11 | Voice Room Settings | 1 | 1~6 |
| 12 | Button Brightness Adjustment | 07 | 01~08 |
| 13 | Energy Saving Mode Temperature Regulation | 18 | 5~60℃ |

10. Child Lock Function
The child lock feature prevents accidental changes to settings, ensuring consistent temperature control.
- Activate/Deactivate: Long press the Child Lock button (
) to enable or disable the child lock. - When activated, the screen will display a lock icon, and buttons will not respond to short presses.

11. Backlight Adjustment
You can adjust the backlight brightness of the thermostat for optimal visibility.
- Manual Adjustment: In shutdown state, simultaneously press the Grid icon (
) and Down arrow (
) for 5 seconds to enter advanced options. Navigate to the backlight brightness setting (Option 10) and use the Up/Down arrows to adjust. - App Adjustment: For WiFi models, backlight brightness can also be adjusted through the Tuya Smart Life app settings.

12. User Tips
- Sensor Cable Length: The included NTC sensor cable for 16A electric floor heating models is 3 meters long. If a longer cable is required, ensure it is compatible with NTC10kB 25/50:3950K specifications.
- WiFi Connectivity: The WiFi models offer advanced features like real-time weather display and humidity display, in addition to remote control and programming via the app. Ensure your WiFi network is stable for optimal performance.
- Programming Flexibility: Utilize the 5+2, 6+1, or 7-day programming options in advanced settings (Option 6) to tailor your heating schedule to your weekly routine.
13. Troubleshooting
- Thermostat not powering on: Check the power supply connection and ensure the circuit breaker is on. Verify wiring is correct.
- Temperature not adjusting: Ensure the child lock is not activated. If using the app, check app connectivity.
- WiFi connection issues: Ensure the thermostat is within range of your WiFi router. Verify correct WiFi password entry in the app. Try restarting both the thermostat and your router.
- Inaccurate temperature readings: Check the NTC sensor connection. If calibration is needed, use the temperature calibration setting (Option 1 in Advanced Settings).
- Programming not working: Ensure the correct time slot programming mode (Option 6 in Advanced Settings) is selected. For app programming, ensure settings are saved and synced.
14. Maintenance
- Cleaning: Wipe the thermostat screen and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Tuya Smart Life app for any available firmware updates for your thermostat to ensure optimal performance and access to new features.
- Sensor Care: Ensure the NTC sensor is not obstructed or damaged, as this can affect temperature accuracy.
15. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
