1. Introduction
This manual provides instructions for the RMF-TX810U replacement voice remote control. This remote is designed to be compatible with Sony 2023 Smart TVs and offers similar functionality to the original remote, including voice control via Bluetooth wireless communication. Please read this manual carefully before using the remote control.
Figure 1: Front View of RMF-TX810U Remote Control
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two (2) AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery cover securely.
Figure 2: Back View and Battery Compartment
2.2 Pairing with your Sony Smart TV (Bluetooth)
This remote control uses Bluetooth for wireless communication, especially for the voice function. Pairing is typically required for full functionality, including voice control.
- Ensure your TV is powered on.
- On your Sony Smart TV, navigate to the Settings menu.
- Look for options related to Remotes & Accessories or Bluetooth Settings.
- Select Add device or Pair new device.
- On the RMF-TX810U remote, press and hold the Volume Down (-) button and the Voice Assistant button (microphone icon) simultaneously for a few seconds until an indicator light on the remote (if present) flashes or the TV detects the remote.
- Select "RMF-TX810U" or a similar name from the list of available devices on your TV screen to complete the pairing process.
- Once paired, a confirmation message should appear on your TV.
Note: Specific pairing steps may vary slightly depending on your Sony TV model. Refer to your TV's user manual for detailed instructions if needed.
3. Operating the Remote Control
The RMF-TX810U remote control provides intuitive access to your Sony Smart TV's functions. Below are the primary button functions:
| Button | Function |
|---|---|
| Power (⏻) | Turns the TV on or off. |
| TV | Switches to TV input. |
| MENU | Accesses the TV's main menu. |
| Navigation Pad (Up/Down/Left/Right/Enter) | Navigates through menus and selects items. |
| Back (↩) | Returns to the previous screen or menu. |
| Home (⌂) | Goes to the TV's home screen. |
| Volume Up/Down (+/-) | Adjusts the TV volume. |
| Channel Up/Down (CH +/-) | Changes TV channels. |
| Mute (🔇) | Mutes or unmutes the TV sound. |
| Voice Assistant (Microphone icon) | Activates the TV's voice assistant for commands and search. (Requires Bluetooth pairing) |
| Netflix, Prime Video, Disney+, YouTube, Crunchyroll | Direct access buttons for popular streaming services. |
| Play/Pause, Fast Forward, Rewind | Media playback controls. |
3.1 Using Voice Control
To use the voice control feature, ensure the remote is successfully paired via Bluetooth (see Section 2.2). Press and hold the Voice Assistant button (microphone icon) and speak your command clearly into the remote. Release the button when you are finished speaking.
4. Maintenance
4.1 Battery Replacement
When the remote control's performance degrades or it stops responding, it's time to replace the batteries. Follow the steps in Section 2.1 to replace the two AAA batteries. Always replace both batteries at the same time with new ones.
4.2 Cleaning
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
5. Troubleshooting
- Remote not responding:
- Check if the batteries are correctly inserted and not depleted. Replace them if necessary.
- Ensure there are no obstructions between the remote and the TV's IR receiver (for basic functions) or that the remote is within Bluetooth range (for voice and advanced functions).
- Try re-pairing the remote control with your TV (see Section 2.2).
- Voice function not working:
- Verify that the remote is successfully paired with your TV via Bluetooth.
- Ensure your TV's voice assistant feature is enabled in its settings.
- Speak clearly and hold the Voice Assistant button while speaking.
- Certain buttons not working:
- Confirm that the replacement remote has the exact same buttons as your original TV remote. Some functions may not be supported if the button layout differs significantly.
- If only specific buttons are unresponsive, it might indicate a defect.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Remote Controller |
| Model | RMF-TX810U |
| Compatibility | Sony 2023 Smart TVs (replacement for RMF-TX810U original) |
| Wireless Communication | Bluetooth |
| Power Source | 2 x AAA batteries (not included) |
| Material | ABS |
| Dimensions (approx.) | Length: 25 cm, Width: 8 cm, Height: 8 cm |
| Weight (approx.) | 0.08 kg |
7. Warranty and Support
This product is a compatible replacement remote control, not a genuine/original Sony product. It is designed to replicate the functionality of the original RMF-TX810U remote.
If you encounter any issues with the product upon arrival, such as damage or non-functionality, please contact the seller for assistance. The seller is committed to resolving problems related to product defects or transit damage.
For further support or inquiries, please refer to the seller's contact information provided at the point of purchase.
8. User Tips
- Match Original Remote: For optimal compatibility and full functionality, ensure that the button layout of this replacement remote closely matches your original Sony TV remote control.
- Bluetooth Pairing for Voice: Remember that the voice control feature relies on Bluetooth. If voice commands are not working, re-check the Bluetooth pairing status in your TV's settings.
- Battery Quality: Use high-quality AAA batteries for consistent performance and longer battery life.
