Introduction
This manual provides detailed instructions for the installation and configuration of the PHYEE Wiring Harness with CAN Bus Decoder and RCA Connector. This product is designed to integrate an aftermarket Android head unit with your vehicle's existing electrical system, enabling features such as steering wheel controls, reverse camera input, and maintaining communication via the CAN Bus system.
Please read this manual thoroughly before installation to ensure correct setup and optimal performance.

Figure 1: Overview of the PHYEE wiring harness kit, including the main harness with 16-pin connector, RCA cables, CAN Bus decoder, and the blue and green 12-pin and 32-pin connectors.
Specifications
| Attribute | Detail |
|---|---|
| Model Name | 16P2FIAT12P32PCAN |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Material | Copper |
| Item Weight | 0.12 kg |
| Item Size | CAN BUS Harness Adapter |
| Connectors | 16 Pin Plug, 12 Pin and 32 Pin Connector |
| CAN Bus Decoder | Included (Hiworld brand) |
Compatible Car Models:
- Fiat Strada (2020 - Present)
- Fiat Toro (2020 - Present)
- Fiat Mobi (2020 - Present)
- Fiat Pulse (2021 - Present)
- Fiat Ducato (2023)
- Fiat Egea (2020 - Present)
Important: Due to regional differences, the above compatibility is for reference only. You must confirm that your car's original wire harness plug matches our wiring harness socket before purchasing and installation.
Packaging List
- 16 pin harness adapter * 1 piece
- CAN Bus decoder * 1 piece
- FAKRA male car antenna cable * 1 piece (Optional, depending on package)
Setup Instructions
Before beginning installation, ensure your vehicle's ignition is off and the battery is disconnected to prevent electrical damage.
1. Identify Vehicle Connectors
Locate the original wiring harness connectors behind your car's factory radio. The PHYEE harness is designed to connect to the 12-pin and 32-pin connectors in compatible Fiat models.

Figure 2: Example of car radio back panel showing the 32-pin (blue) and 12-pin (green) connection points for the harness.

Figure 3: Close-up of the 32-pin (blue) and 12-pin (green) connectors on the PHYEE harness.
2. Connect the Harness
- Connect the blue 32-pin connector from the PHYEE harness to the corresponding port on your vehicle's wiring.
- Connect the green 12-pin connector from the PHYEE harness to its corresponding port.
- Connect the 16-pin plug of the PHYEE harness to the 16-pin socket on your Android head unit.
- Connect the RCA cables (red, white, yellow) from the PHYEE harness to the appropriate audio/video input/output ports on your Android head unit.
- Connect the CAN Bus decoder to its designated port on the harness.
- If included and applicable, connect the FAKRA male car antenna cable.

Figure 4: Key components of the wiring harness: 16-pin plug for the Android unit, the CAN Bus decoder, and RCA connectors for audio/video.

Figure 5: The wiring harness fully connected to the back of a car Android head unit.
3. Wiring Diagram (16-Pin Connector)
Refer to the following diagram for the pinout and function of the 16-pin connector:

Figure 6: Detailed wiring diagram for the 16-pin connector, showing wire colors and their functions.
- White, White/black striped: Front speaker L
- Gray, Gray/black striped: Front speaker R
- Green, Green/black striped: Rear speaker L
- Purple, Purple/black striped: Rear speaker R
- Black: GND (Ground Wire / B-)
- Yellow: BATTERY (Constant Power Supply +12V)
- Red: ACC (Ignition Switch)
- Orange: ILLUMINATION (Illuminate Backlight)
- Pink: REVERSE (Reversing camera control line)
- Brown/white: KEY2 (Steering Wheel Control 2)
- Brown: KEY1 (Steering Wheel Control 1)
- Blue: ANT (Auto Antenna Power)
Operating Instructions
1. Initial Power-Up
After connecting all components and reconnecting the vehicle battery, turn on your car's ignition. Your Android head unit should power on.
2. CAN Bus Settings Configuration
The CAN Bus decoder requires configuration within your Android head unit's settings to properly communicate with your vehicle's systems. Follow these steps:
- Enter the Android system's factory settings menu. (Consult your Android unit's manual for how to access this menu, often requiring a specific password).
- Locate and select the 'CAN Bus decoder type' option.
- Choose the correct 'car brand' (e.g., Fiat).
- Select the specific 'car model and year' that matches your vehicle (e.g., Strada 2020).

Figure 7: Screenshot illustrating the CAN Bus setting operation within an Android head unit's factory settings.
3. Functionality Check
Once configured, test the following functions:
- Steering Wheel Controls: Verify that volume, track skip, and other programmed buttons on your steering wheel function correctly with the Android unit.
- Reverse Camera: If connected, ensure the reverse camera automatically displays when shifting into reverse gear.
- Illumination: Check that the head unit's backlight adjusts with your vehicle's dashboard illumination.
- Power On/Off: Confirm the head unit powers on and off with the vehicle's ignition.
Maintenance
The PHYEE Wiring Harness and CAN Bus Decoder are designed for durability and require minimal maintenance. To ensure longevity:
- Ensure all connections are secure and free from moisture or excessive heat.
- Avoid pulling on the wires directly; always grasp the connector when disconnecting.
- Periodically check for any signs of wear or damage to the cables and connectors.
Troubleshooting
- No Power to Android Unit:
- Check all power connections (Yellow for constant +12V, Red for ignition switch).
- Ensure the 16-pin plug is fully seated in the Android unit.
- Verify vehicle battery is connected and charged.
- Steering Wheel Controls Not Working:
- Confirm the CAN Bus decoder is correctly connected and configured in the Android unit's factory settings (refer to Operating Instructions, step 2).
- Ensure the correct car brand, model, and year are selected in the CAN Bus settings.
- Check the Brown (KEY1) and Brown/white (KEY2) wires for secure connection.
- No Sound or Distorted Audio:
- Verify all speaker wires (White, Gray, Green, Purple and their striped counterparts) are correctly connected to the Android unit and speakers.
- Check RCA audio connections if using external amplifiers or components.
- Reverse Camera Not Activating:
- Ensure the Pink (REVERSE) wire is correctly connected to the reversing camera control line.
- Verify the camera itself is powered and functioning.
- Compatibility Issues (e.g., Fiat Argo):
- This harness is specifically designed for the listed Fiat models (Strada, Toro, Mobi, Pulse, Ducato, Egea). It is NOT compatible with models like the Fiat Argo. Always verify your car's original harness plug matches the product's sockets before purchase and installation.
User Tips
- Verify Compatibility: Always double-check your vehicle's original wiring harness connectors against the product images (Figure 2 and Figure 3) to ensure a perfect match before attempting installation. Regional variations can exist.
- CAN Bus Configuration is Key: Proper functionality of steering wheel controls and other integrated features heavily relies on correctly setting up the CAN Bus decoder type, car brand, model, and year within your Android head unit's factory settings. Do not skip this step.
- Professional Installation Recommended: If you are unsure about any part of the installation process, it is highly recommended to seek assistance from a qualified car audio technician.
Warranty and Support
This PHYEE product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact the seller directly through your purchase platform. Provide your order number and a detailed description of the issue for prompt service.
For further information or to view product videos, please refer to the official product page or contact customer service.
Video 1: Product overview demonstrating the physical components of the wiring harness kit.