1. Introduction
Thank you for choosing the TESSAN TS-1013-GR USB Power Strip. This device is designed to provide convenient and safe power distribution for your home, office, or dorm. It features multiple AC outlets, USB charging ports, individual switches for energy saving, and robust surge protection to safeguard your electronic devices.
Figure 1: TESSAN TS-1013-GR USB Power Strip
Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.
2. Safety Instructions
- Do not exceed the maximum power rating of 1875W or 15A. Overloading may cause damage to the unit and connected devices, and could lead to fire.
- This product is for indoor use only. Do not expose to moisture or use in wet environments.
- Do not disassemble, modify, or attempt to repair the unit. Refer all servicing to qualified personnel.
- Keep away from children and pets.
- Ensure the plug is fully inserted into the wall outlet.
- Do not use with extension cords that are not properly grounded or rated for the power strip's capacity.
- Avoid placing the power strip near heat sources or in direct sunlight.
- If the overload protection switch trips, reduce the load by unplugging some devices before resetting the switch.
3. Product Features
- 12 AC Outlets & 3 USB Ports: Provides ample power for multiple devices simultaneously.
- 6 Individual Switches: Each switch controls a pair of AC outlets, allowing you to power on/off specific devices to save energy.
- 1700 Joules Surge Protection: Protects connected electronics from power surges and spikes.
- Multiple Safety Protections: Includes Over-Load, Over-Current, Short-Circuit protection, and is made from 1782°F heat-resistant material.
- Widely Spaced Outlets: Designed with 1.55-inch spacing between outlets and a double inclined design to accommodate bulky power adapters without blocking adjacent ports.
- 6ft Long Extension Cord with Flat Plug: The 6-foot cord offers flexibility in placement, and the 45-degree angled flat plug (0.67 inches thick) fits easily behind furniture or in tight spaces.
- Wall Mountable Design: Features 4 keyholes on the back for secure installation on walls, workbenches, or under counters.
- Rubber Mats: Equipped with 4 rubber mats on the bottom for stability and to prevent sliding.
Figure 2: Widely Spaced Outlets for Bulky Adapters
Figure 3: Surge Protection and Safety Features
Figure 4: Flat Plug Design for Tight Spaces
Figure 5: Wall Mountable Design and Stability Features
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | TS-1013-GR |
| Brand Name | TESSAN |
| Type | Extension Socket |
| Plug Type | US |
| Rated Voltage | 125V |
| Rated Current | 15A |
| Rated Power | 1875W |
| Outlets Number | 12 |
| USB Ports Number | 3 |
| USB Total Power | 15W |
| Single USB Max Output | 5V 2.4A |
| Extension Cable Length | 1.8m (6ft) |
| Surge Protector | Yes (1700 Joules) |
| Overload Protection | Yes |
| Sub-control Switch | Yes (6 individual switches) |
| Grounding | Standard Grounding |
| WIFI | No |
| Application | Residential / General-Purpose |
| Certification | CE, RoHS |
5. Setup
- Unpack: Carefully remove the power strip and any accessories from the packaging. Retain packaging for future storage or transport.
- Placement: Choose a dry, indoor location for the power strip. Ensure it is away from direct sunlight, heat sources, and moisture. The unit can be placed on a flat surface or mounted to a wall/workbench using the integrated keyholes.
- Wall Mounting (Optional): If wall mounting, use appropriate screws (not included) for your wall type. Align the keyholes on the back of the power strip with the screws.
- Plug In: Insert the power strip's flat plug into a standard US 3-prong grounded wall outlet.
- Connect Devices: Plug your AC-powered devices into the 12 AC outlets and your USB-powered devices into the 3 USB ports.
Video 1: TESSAN Power Strip Product Demonstration
6. Operating Instructions
- Master Power Switch: The main power switch controls the entire power strip. Press it to turn the unit on or off.
- Individual Outlet Control: The power strip features 6 individual switches. Each switch controls a pair of AC outlets. Press an individual switch to power on or off the devices connected to its corresponding outlets. This allows for selective power control and energy saving.
- Indicator Lights:
- "Grounded" Indicator (Green Light): Illuminates when the power strip is properly grounded.
- "Protected" Indicator (Red Light): Illuminates when the surge protection is active and functioning. If this light goes out, the surge protection has been compromised and the unit should be replaced.
- USB Charging: The 3 USB ports provide a total output of 15W (5V/3A total, 2.4A max per port). Simply plug your USB charging cables into these ports to charge compatible devices.
Figure 6: Individual Outlet Control and Indicator Lights
Figure 7: USB Charging Ports in Use
7. Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use and replace the unit.
- Storage: When not in use for extended periods, store the power strip in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
- No Power to Devices:
- Ensure the power strip's plug is fully inserted into the wall outlet.
- Check if the master power switch is ON.
- Verify that the individual switch for the specific outlets is ON.
- Check if the circuit breaker (overload protection switch) has tripped. If so, unplug some devices and press the reset button.
- Test the wall outlet with another device to ensure it is functioning.
- USB Devices Not Charging:
- Ensure the power strip is powered on.
- Check the USB cable for damage and ensure it is properly connected to both the power strip and the device.
- Try a different USB port or cable.
- Ensure your device is compatible with 5V/2.4A charging.
- "Protected" Indicator Light is Off: This indicates that the surge protection component has absorbed a significant surge and is no longer providing protection. The power strip will still function as an extension cord, but it is recommended to replace the unit to maintain surge protection for your devices.
9. User Tips
- Utilize the individual switches to turn off devices that are not in use, reducing phantom power consumption and saving energy.
- The widely spaced outlets are ideal for accommodating large power bricks without obstructing other outlets. Plan your device placement to make the most of this feature.
- The flat plug and 6ft cord make this power strip versatile for use behind furniture or in areas where standard plugs would protrude too much.
- Consider wall-mounting the power strip in workshops, garages, or under desks to keep cords organized and surfaces clear.
10. Warranty and Support
TESSAN products are designed for reliability and performance. For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
