1. Introduction
This manual provides detailed instructions for the RMT-AH240E and RMT-AH240U remote controls. These remotes are designed to operate various Sony AV systems, offering convenient control over your audio and video experience. Please read this manual thoroughly before using your remote control.

Figure 1: RMT-AH240E (left) and RMT-AH240U (right) Remote Controls
2. Safety Information
- Do not expose the remote control to direct sunlight, heat sources, or extreme humidity.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not attempt to disassemble or modify the remote control.
- Battery Safety:
- Use only the specified battery type (AAA).
- Ensure batteries are inserted with correct polarity (+/-).
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Dispose of used batteries according to local regulations.
3. Package Contents
- 1 x Remote Control (RMT-AH240E or RMT-AH240U)
Note: Batteries are not typically included and must be purchased separately.
4. Setup
4.1. Battery Installation
- Open the battery compartment cover on the back of the remote control by sliding it downwards.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks.

Figure 2: Battery Compartment
4.2. Initial Use (Infrared - IR)
The remote control primarily operates via infrared (IR) signals. For most compatible Sony AV systems, no special setup is required after battery installation. Simply point the remote control directly at your AV system's IR receiver and press the desired function button.
- Ensure there are no obstructions between the remote control and the AV system.
- Maintain a reasonable distance for optimal performance.
4.3. Bluetooth Pairing (If Applicable)
Some advanced Sony AV systems may support Bluetooth control. If your system requires Bluetooth pairing for enhanced functionality (e.g., voice control), follow these general steps:
- Ensure your Sony AV system is powered on and in Bluetooth pairing mode (refer to your AV system's manual for specific instructions).
- On the remote control, press and hold the PAIRING button (often located near the colored buttons) for a few seconds until an indicator light on the remote (if present) or a message on your AV system confirms pairing mode.
- Follow any on-screen prompts on your AV system to complete the pairing process.
5. Operating Instructions
The remote control features a variety of buttons for controlling your Sony AV system. Refer to the images below for button layouts.

Figure 3: RMT-AH240E Button Layout

Figure 4: RMT-AH240U Button Layout
5.1. Button Functions
| Button | Function |
|---|---|
| I/O (Power) | Turns the AV system on or off (standby). |
| INPUT | Selects the input source (e.g., HDMI 1, HDMI 2, TV). |
| CLEAR AUDIO+ | Activates or deactivates ClearAudio+ sound mode. |
| SOUND FIELD | Cycles through various sound field modes. |
| DISPLAY | Shows or hides on-screen display information. |
| VOICE | Activates voice control (if supported by your AV system and paired via Bluetooth). |
| NIGHT | Activates Night Mode for optimized sound at low volumes. |
| DIMMER | Adjusts the brightness of the AV system's display. |
| RED / GREEN / YELLOW / BLUE | Context-sensitive function buttons, often used for interactive menus or specific app functions. |
| MIRRORING | Initiates screen mirroring (if supported). |
| PAIRING | Used for Bluetooth pairing (see Section 4.3). |
| Navigation Buttons (Up/Down/Left/Right/Center) | Navigates through menus and confirms selections. |
| BACK | Returns to the previous menu or screen. |
| OPTIONS | Displays context-sensitive options menu. |
| HOME | Accesses the main home screen or menu of the AV system. |
| VOL +/- | Adjusts the master volume level. |
| Mute (Speaker icon with cross) | Mutes or unmutes the audio output. |
| SW +/- | Adjusts the subwoofer volume level. |
| Playback Controls (|<<||/>/>/>|) | Rewind, Play/Pause, Fast Forward, Previous Track, Next Track. |
| AUDIO | Selects audio tracks or audio output modes. |
| RX/TX | Receiver/Transmitter function (specific to certain AV systems, refer to your system's manual). |
| Bluetooth Icon | Activates Bluetooth function or switches to Bluetooth input. |
6. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical detergents, as these can damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote control's range decreases, or it becomes unresponsive. Always replace both batteries at the same time.
- Storage: If not used for an extended period, remove the batteries to prevent leakage and store the remote control in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not work. |
|
|
| Specific buttons are not responding. |
|
|
| Bluetooth functions (e.g., Voice) not working. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand (Remote Manufacturer) | XSRUPB |
| Compatible Brand | Sony |
| Models | RMT-AH240E, RMT-AH240U |
| Wireless Communication | Infrared (IR), Bluetooth (for specific functions/models) |
| Use | Audio / Video Players |
| Power Supply | 2 x AAA Batteries (not included) |
| Certification | CE, FCC |
| Package | Yes |
| Form-factor | Others (Standard Remote) |
9. User Tips
- Line of Sight: For IR operation, always ensure a clear line of sight between the remote control and your Sony AV system.
- Battery Orientation: Double-check battery polarity when installing new batteries to ensure proper function and prevent damage.
- System Compatibility: While this remote is broadly compatible, some advanced functions (like Voice or Mirroring) may require specific AV system models or configurations. Refer to your Sony AV system's manual for full compatibility details.
10. Warranty and Support
This product is typically covered by the seller's return policy and any implied warranties. For specific warranty details, return procedures, or technical support, please contact the original seller or retailer from whom you purchased this remote control.
Keep your purchase receipt as proof of purchase for any warranty claims.