SMART SENSOR ST8100A

Contents

Oxygen Gas Detector Instruction Manual

Model: ST8100A | Brand: SMART SENSOR

1. Introduction

The SMART SENSOR ST8100A is a precision oxygen concentration instrument designed for detecting the presence of oxygen (O₂) gases in various environments. Utilizing an advanced electrochemical sensor, this device provides quick and accurate measurements of oxygen concentration. It features a large LCD screen for clear display of results, including gas concentration and temperature, and incorporates audible and visual alarms for safety. Its portable and rechargeable design makes it suitable for a wide range of applications, from industrial settings to personal use.

2. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

  • 1 x Oxygen Detector (Model ST8100A)
  • 1 x USB Charging Cable
  • 1 x Hose
  • 1 x Carrying Case
  • 1 x User Manual (English)
Oxygen Detector ST8100A with included accessories: USB cable, hose, carrying case, and user manual.
Figure 2.1: Oxygen Detector and accessories

3. Product Overview

Familiarize yourself with the components and controls of your Oxygen Gas Detector:

Labeled diagram of the Oxygen Detector showing Sensor, LCD Display, Mode Button, Down/Backlight Button, Charging Indicator, ON/OFF Switch, Unit Button, Up/Sound Button, Buzzer, and Alarm Indicator.
Figure 3.1: Main components and controls of the ST8100A Oxygen Detector
  • Sensor: Located at the top, responsible for detecting oxygen levels.
  • LCD Display: Large screen displaying O₂ concentration, temperature, humidity, battery status, and alarm indicators.
  • Mode Button: Used to cycle through different operating modes or settings.
  • ON/OFF Switch: Powers the device on or off.
  • Unit Button: Changes the unit of measurement (if applicable).
  • Up/Sound Button: Adjusts settings upwards or controls sound features.
  • Down/Backlight Button: Adjusts settings downwards or controls the display backlight.
  • Charging Indicator: LED or icon indicating charging status.
  • Buzzer: Emits audible alarms.
  • Alarm Indicator: Visual indicator for alarms (e.g., flashing light).
Close-up of the oxygen sensor probe at the top of the device.
Figure 3.2: Sensor Probe
Close-up of the comfortable rubber control buttons on the device.
Figure 3.3: Control Buttons
Close-up of the micro USB charging port on the side of the device.
Figure 3.4: USB Charging Port
Close-up of the reserved interface for a back stand on the device.
Figure 3.5: Back Stand Interface

4. Setup

4.1. Charging the Device

The ST8100A is equipped with a built-in 3.7V rechargeable lithium battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

  1. Connect the micro USB end of the charging cable to the USB charging port on the device.
  2. Connect the standard USB end to a compatible power source, such as a phone power adapter, computer USB port, or power bank.
  3. The charging indicator will illuminate to show that the device is charging.
  4. Once fully charged, the indicator may change color or turn off (refer to the device's specific charging behavior).

The device can be used while charging.

5. Operating Instructions

5.1. Powering On/Off

  1. To power on, press and hold the ON/OFF Switch button until the LCD screen illuminates.
  2. To power off, press and hold the ON/OFF Switch button again until the screen turns off.

5.2. Oxygen Measurement

Once powered on, the device will automatically begin detecting oxygen concentration. The current O₂ percentage will be displayed prominently on the LCD screen.

Oxygen Detector in use, showing a reading of 21.1% O2, with features like audible and visual alarm, sensitive response, and measurement with pump highlighted.
Figure 5.1: Oxygen Detector in operation
  • Ensure the sensor probe is exposed to the environment where oxygen concentration needs to be measured.
  • For measurements in confined or hard-to-reach spaces, attach the provided hose to the sensor inlet.
  • The device provides a sensitive and fast response, with readings stabilizing within 15 seconds.

5.3. Alarm Settings

The ST8100A features a dual acoustic and light alarm system. You can manually set high and low alarm thresholds.

Oxygen Detector displaying a Beep/Flash Double Alarm, with icons for beep alarm and flash alarm.
Figure 5.2: Beep/Flash Double Alarm
  1. Press the MODE button to enter the alarm setting interface.
  2. Use the Up/Sound Button and Down/Backlight Button to adjust the desired high and low alarm values.
  3. Press the MODE button again to confirm and save the settings, or to exit the setting mode.
  4. When the O₂ concentration reaches or exceeds the set alarm level, the device will emit an audible beep and flash its alarm indicator.

5.4. Changing Units and Backlight

  • Press the UNIT button to cycle through available measurement units (if applicable).
  • Short press the Down/Backlight Button to toggle the LCD backlight on or off for better visibility in different lighting conditions.

6. Maintenance

6.1. Cleaning

  • Wipe the device exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Keep the sensor area clean and free from dust or debris to ensure accurate readings.

6.2. Storage

  • When not in use for extended periods, store the detector in its carrying case in a cool, dry place.
  • Avoid extreme temperatures and high humidity.

6.3. Battery Care

  • To prolong battery life, avoid fully discharging the battery frequently.
  • Charge the device regularly, even if not in constant use.

No user-serviceable parts inside. Do not attempt to open or repair the device yourself.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Battery is depleted.Charge the device using the provided USB cable.
Inaccurate or fluctuating readings.Sensor is dirty or obstructed; device not calibrated (factory calibrated); extreme environmental conditions.Clean the sensor area. Ensure stable environmental conditions. If issues persist, contact support.
Alarm not sounding/flashing.Alarm settings are off or set too high/low; battery low.Check and adjust alarm settings. Ensure battery is charged.
LCD display is dim or not working.Backlight is off; battery low; display malfunction.Toggle backlight using the Down/Backlight button. Charge the device. If problem persists, contact support.

8. Specifications

FeatureDetail
Model NumberST8100A
Detecting GasOxygen (O₂)
Measuring Range0~100% VOL
Resolution0.1%
Basic Error≤±3% F·S
Temperature Range-10℃~50℃
Humidity Range1%RH~99%RH
Response Time≤15 seconds
Recovery Time≤15 seconds
Sensor PrincipleElectrochemical principle
DisplayLarge screen segment type liquid crystal display (LCD)
Alarm ModeAcoustic and light double alarm (user-settable values)
Battery3.7V Rechargeable lithium battery
Operation Time>90 Hours (Continuous working)
Working Temperature-10℃~50℃
Working Humidity0-95%RH (non-condensing)
Item Size205.2 x 63.8 x 33.3 mm (8.07 x 2.51 x 1.31 in)
Item Weight205 g (7.23 oz)
Package Size25.5 x 21 x 6 cm (10.04 x 8.26 x 2.36 in)
Package Weight669 g (23.59 oz)
Diagram showing the dimensions of the Oxygen Detector: 205.2mm (8.07in) length, 63.8mm (2.51in) width, and 33.3mm (1.31in) thickness.
Figure 8.1: Device Dimensions

9. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general best practices for gas detectors include:

  • Always ensure the device is fully charged before critical measurements.
  • Perform regular visual inspections of the sensor and housing for any damage or obstructions.
  • Understand the specific oxygen concentration limits for your application to set appropriate alarm thresholds.
  • Avoid exposing the device to harsh chemicals or extreme physical shock.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

© 2024 SMART SENSOR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.