1. Introduction
The IRXON BT578 V3 Serial Bluetooth adapter is designed to provide wireless connectivity for serial devices. It connects to a serial device via a DB9 serial port and communicates with a mobile phone or computer using either Classic Bluetooth Serial Port Profile (SPP) or Bluetooth Low Energy (BLE). This adapter eliminates the need for conventional RS232 serial cables, offering a convenient and flexible wireless link for serial communication.
2. Package Contents
Please verify that all items listed below are included in your package:
- BT578_V3 Serial Bluetooth adapter x1
- DB9 male to female gender changer x1
- USB to Type-C power/charging cable x1
- User Guide (Electronic edition, available for download at irxon.com/pdf/docs/BT578_V3_EN.pdf)

3. Product Overview and Features
The BT578 V3 adapter offers enhanced performance and modern connectivity:
- Bluetooth Dual Mode: Supports both Classic Bluetooth Serial Port Profile (SPP) and the newer Bluetooth Low Energy (BLE).
- Versatile Connectivity: Can connect to computers or Android phones via SPP, and to Android or iOS phones via BLE.
- Improved Performance: Features lower power consumption (approximately 8 mA average) and a longer communication distance (up to 50 meters line of sight) compared to previous versions.
- Modern Charging: Utilizes a Type-C interface for power supply and charging.
- Flexible Serial Connection: Can be connected to either female or male serial port devices using the included DB9 connector or gender changer.
- Status Indicator: A green LED indicates TX/RX activity for RS232 serial communication.
- Multiple Power Options: Supports Pin 9 power supply (connect pin 9 to 4-6V and pin 5 to GND) in addition to Type-C.
- Integrated Battery: Built-in battery and charging circuit provide over 24 hours of usage time.
- Configurable: Supports AT commands for setting parameters such as device name and baud rate.




4. Setup
- Connect to Serial Device: Attach the BT578 V3 adapter to the RS232 serial port of your target device. If the gender of the port does not match, use the provided DB9 male to female gender changer. Ensure a secure connection.
- Power the Adapter:
- Via Type-C: Connect the supplied USB to Type-C cable to the adapter's Type-C port and a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Via Pin 9: If your serial device provides power on Pin 9, connect Pin 9 to 4-6V and Pin 5 to GND on the serial port. The adapter has a built-in battery for standalone operation, providing over 24 hours of usage.
- Power On: Locate the power switch on the adapter and slide it to the 'On' position. The power indicator LED should illuminate.
- Bluetooth Pairing:
- On your mobile phone or computer, enable Bluetooth and search for available devices.
- The adapter will appear as 'BT578_SPP' (for Classic Bluetooth) or 'BT578_BLE' (for Bluetooth Low Energy).
- Select the appropriate device and pair. No PIN is typically required for pairing.
5. Operating Instructions
Once the BT578 V3 adapter is connected to your serial device and paired with your host device (computer or mobile phone), you can begin wireless serial communication.
- Establish Connection: After pairing, open a serial terminal application on your host device (e.g., PuTTY, RealTerm on PC; a Bluetooth serial app on mobile).
- Select Bluetooth Port: In your serial terminal application, select the virtual COM port associated with the Bluetooth connection (for SPP) or the specific BLE service.
- Configure Baud Rate: Ensure the baud rate in your terminal application matches the baud rate configured on the BT578 V3 adapter and your serial device. The default baud rate is 9600 bps.
- Data Transmission: You can now send and receive data wirelessly between your host device and the serial device connected to the BT578 V3. The green LED on the adapter will flash to indicate serial data activity (TX/RX).
6. Configuration (AT Commands)
The BT578 V3 adapter supports configuration via AT commands to customize settings such as device name and baud rate. It is important to note the following:
- Physical Connection Required: BT578 V3 does not support AT command configuration via a Bluetooth connection. You must send AT commands via a direct RS232 physical connection.
- Computer Connection: Connect the BT578 V3 to a serial port on your computer. If your computer lacks a physical serial port, a USB-RS232 cable is required to add a virtual COM port.
- Command Format: Some AT commands for BT578 V3 require a carriage return and line feed (CR+LF) to be added at the end of the command for proper execution. Refer to the detailed electronic user guide for a complete list of AT commands and their specific formats.
7. Specifications
| Feature | Specification |
|---|---|
| Standard | Bluetooth v3.0 (SPP) + Bluetooth v4.2 (BLE) |
| Selectable Serial Baud Rate | 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200 bps |
| Serial Communication BLE Characteristic | 0000ffe1-0000-1000-8000-00805f9b34fb |
| Typical Bluetooth Coverage | 30 meters (line of sight) - up to 50 meters observed |
| TX Power | 5dBm |
| RX Sensitivity | -95dBm |
| Typical Working Current | 8 mA |
| Dimensions | 78 x 34 x 16 mm |
| Weight | 30g |
| Type | Module |
| Origin | Mainland China |
| Condition | New |
8. Troubleshooting
8.1. No Reply to AT Commands via Bluetooth App
Problem: When attempting to configure the adapter (e.g., change baud rate) using an Android app connected via Bluetooth (BT578_BLE), AT commands are sent but receive no reply. The power light is on, the Bluetooth light is solid, and the Serial Data Activity LED briefly flashes.
Solution: The BT578 V3 adapter does not support AT command configuration via a Bluetooth connection. To send AT commands, you must establish a direct RS232 physical connection. Connect the BT578 V3 to a serial port on your computer. If your PC does not have a built-in serial port, you will need to purchase and use a USB-RS232 cable to create a physical COM port for this purpose. Ensure that a carriage return and line feed are added at the end of each AT command.
9. User Tips
- AT Command Configuration: Always use a direct RS232 physical connection to your computer for AT command configuration. Bluetooth-based AT command configuration is not supported on the BT578 V3.
- AT Command Termination: When sending AT commands, remember to append both a carriage return and a line feed (CR+LF) at the end of each command for proper execution.
- Power Options: Take advantage of the built-in battery for portable use, or power directly via the Type-C port or Pin 9 of the RS232 interface for continuous operation.
10. Maintenance
To ensure the longevity and optimal performance of your IRXON BT578 V3 adapter, follow these maintenance guidelines:
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the adapter. Avoid using harsh chemicals or abrasive materials.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% and recharge every few months.
- Avoid Physical Damage: Handle the adapter with care to prevent drops or impacts that could damage internal components or connectors.
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official IRXON website or the electronic user guide available for download at irxon.com/pdf/docs/BT578_V3_EN.pdf. This document contains comprehensive instructions and contact information for further assistance.