1. Product Overview
The Smartour AHD 1080P 3D 360 Degree HD Bird View System is a comprehensive car parking and surveillance solution featuring four AHD 1080P cameras, a 4-channel video recorder (DVR), and a wireless knob for control. It offers multiple viewing modes to enhance driving safety and parking assistance.
Key Features:
- 3D and 2D view modes optional
- Wireless knob remote control
- Automatic circular display after car start, with adjustable angle via remote
- Support for multiple view models including Width Limiting Mode and Streaming Media
- Support CVBS, AHD, HDMI, VGA video formats, and 16:9 / 24:9 wide screen view
- Recorder resolution: 1920x1080P; Camera pixel: 1080P
- Support for full-automatic calibration (calibration cloth sold separately)
- 4-way video recording and playback in MOV format
- Circular recording: new files automatically overwrite old files
- Ability to save important videos to prevent loss
- Support for U disk 8G-32G (3.0-3.5 flash, FAT32 format)
- Special Features: Waterproof, Cyclic Recording, Real Time Surveillance, NIGHT VISION, Motion Detection, Cycle Recording
2. Setup and Installation
2.1 Wiring Diagram
The following diagram illustrates the connections for the Smartour 360 Degree HD Bird View System. Ensure all connections are secure and correctly matched.
- Front Camera: Connect to the designated front camera input.
- Rear Camera: Connect to the designated rear camera input.
- Left Camera: Connect to the designated left camera input.
- Right Camera: Connect to the designated right camera input.
- Reversing Light Positive: Connect to the vehicle's reversing light positive for reverse gear detection.
- Turn Signal Positive: Connect to the vehicle's turn signal positive wires for left and right turn signal detection.
- 12V & ACC 12V: Connect to constant 12V power and Accessory 12V power respectively.
- Ground: Connect to a reliable vehicle ground point.
- USB Interface: For connecting a U disk for recording.
- Video Output: AHD, CVBS, HDMI, VGA outputs are available for connecting to a compatible monitor.
2.2 Camera Placement
Proper placement of the four cameras is crucial for an accurate 360-degree bird view. The system includes front, rear, left, and right view cameras.
2.3 Calibration
The system supports full-automatic calibration for precise 360-degree view stitching. A calibration cloth is required and needs to be purchased separately.
The calibration process typically takes about 10 seconds once the cloth is correctly positioned.
3. Operating Instructions
3.1 Menu Interface
The main menu provides access to various functions:
- Driving Record (Record List, Record Set)
- Video Settings (Control Set)
- Control Settings
- Panorama Adjustment (AVM Adjust)
- Display Settings (Display Set)
- System Settings (System Set)
- Version Information (Version Info)
3.2 Wireless Knob Control
The wireless knob provides intuitive control over the system's functions:
- Short Press:
- If 360 panorama is off, short press to turn it on.
- If 360 panorama is on, short press acts as the 'OK' button on the remote control.
- Left Rotation: When 360 panorama is open, rotate left to switch to the related left view.
- Right Rotation: When 360 panorama is open, rotate right to switch to the related right view.
- Long Press (1 second): When 360 panorama is on, long press to return to the previous menu, acting as the 'Return' key on the remote control.
- Sleep Mode: If the knob is not operated for a period, it will enter sleep mode to save power. Briefly press 'OK' or rotate left/right to wake it up.
3.3 Activating the 360 Bird View
The 360-degree bird view can be activated in several ways:
- Press the remote control button.
- Double-press the car's hazard emergency light button.
- Trigger by lamp signal (e.g., reverse gear, turn signals).
3.4 Driving Assistance Modes
The system offers various display modes to assist driving and parking:
- 3D Look Around
- Forward-looking Streaming
- Forward Vision Zone Trajectory
- Front View Enlarged View
- Car Roof Look Around
- Rear View Streaming
- Rear View Belt Trajectory
- Rear View Zoom
- Front Wheel Narrow Track Mode
- Narrow Track Mode for Front and Rear Wheels
- 3D Left View
- 3D Right View
3.5 Control Settings (Menu Options)
Access the 'Control Set' menu to configure various system behaviors:
- Boot Mode:
- Automatic start: 360 system starts automatically after each ignition.
- Background start: 360 system does not start automatically after ignition. User must activate by reverse gear, turn signal, or P key.
- Emergency Light Control:
- Simultaneous display of left and right: Displays left and right camera views when emergency lights are on.
- Streaming media: Displays front and rear streaming media when emergency lights are on.
- Off: 360 display will not switch when emergency lights are on.
- Turn Signal Control:
- On: Turn signal can activate 360 panorama.
- Off: Turn signal cannot activate 360 panorama.
- Vehicle Speed Control: Automatically turns off 360 panorama when the vehicle speed exceeds a set limit.
- Square Control: Toggles the original car button function.
- P Key Control: Toggles the P key function.
- Front and Rear View:
- Original View: Displays the original view before and after.
- Correction View: Displays the corrected front and rear view.
- Turn Signal Display:
- Corrected Rear View: Displays corrected left and right rear views when turn signals are active.
- 3D View: Displays left and right 3D views when turn signals are active.
- Original View: Displays left and right original views when turn signals are active.
- Self-test Delay: After booting, the system will automatically exit 360 if the set delay time is exceeded.
- Foresight Delay: After exiting reverse gear, the system will automatically exit 360 after the set delay time.
- Steering Delay: After turning off the steering, the system will automatically exit 360 after the set delay time.
- Display Delay: After cutting out 360 with double flash, the system will automatically exit 360 after the set delay time.
- Phase Selection: Select the appropriate output video signal phase.
4. Maintenance
4.1 Recording Management
The system features 4-way video recording. Recordings are saved as MOV files on a U disk (8G-32G, FAT32 format).
- Circular Recording: The system automatically overwrites the oldest files when the storage is full.
- Saving Important Videos: Ensure important video segments are manually saved or backed up to prevent them from being overwritten.
4.2 System Settings
The 'System Set' menu allows for system upgrades, parameter management, and factory resets.
The factory has pre-configured the system. It is recommended not to arbitrarily change the internal settings unless necessary.
5. Troubleshooting
- No Image Display:
- Check all video cable connections (AHD, CVBS, HDMI, VGA) to ensure they are secure.
- Verify that the monitor is compatible with the selected video output format.
- Ensure the system is receiving proper power (12V and ACC 12V).
- System Not Responding to Turn Signals/Reverse:
- Confirm that the turn signal positive and reversing light positive wires are correctly connected to the vehicle's signals.
- Check the 'Control Set' menu to ensure 'Turn Signal Control' and 'P Key Control' are enabled if you intend to use them for activation.
- Some vehicles may require a CAN bus adapter for proper signal integration. Consult a professional installer if issues persist.
- Incorrect 360-Degree View:
- Perform system calibration using the dedicated calibration cloth. Incorrect calibration can lead to distorted or misaligned views.
- Ensure cameras are securely mounted and not obstructed.
- How to Reset to Factory Settings:
- Navigate to the 'System Set' menu.
- Select 'Factory set'.
- The unified password for accessing settings is 666888.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SMARTOUR |
| Model | AHD 1080P 3D 360 Degree HD Bird View System |
| Recorder Resolution | 1920x1080P |
| Camera Pixel | 1080P |
| Number Of Lenses | 4 |
| Max External Memory | 32G (U disk, FAT32 format) |
| Video Format Support | CVBS, AHD, HDMI, VGA |
| Display Size | No (Monitor sold separately or integrated with vehicle system) |
| Interface | AV-Out |
| Special Features | Waterproof, Cyclic Recording, Real Time Surveillance, NIGHT VISION, Motion Detection, Cycle Recording |
| Certification | CE |
| Origin | Mainland China |
| Package Weight | 1.1 kg |
| Package Dimensions | 30cm x 18cm x 9cm |
7. User Tips
- Calibration is Key: For the most accurate and seamless 360-degree view, invest in the calibration cloth and perform the automatic calibration process.
- Wiring Considerations: Pay close attention to the wiring for turn signals and reverse lights. If your vehicle uses a CAN bus system, you might need a compatible adapter for full functionality.
- Factory Settings: The system comes pre-configured. Avoid changing settings in the 'System Set' menu unless you are familiar with their function, as this can affect performance.
- Monitor Compatibility: While the system provides video output, ensure you have a compatible monitor (AHD, CVBS, HDMI, VGA) for display, as a monitor is not included with all SKUs.
8. Warranty and Support
For technical support, troubleshooting assistance, or warranty claims, please contact Smartour customer service or your authorized dealer. Refer to the official Smartour website for the most up-to-date support information.
A detailed user manual in PDF format may be available for download from the manufacturer's website. (Reference: User manual (PDF))
9. Product Demonstration Video
Watch this video for a visual demonstration of the Smartour 360 Degree HD Bird View System's features and operation.