1. Introduction
This manual provides essential information for the safe and efficient operation of your SUMRY MPS-VIII ECO Series Hybrid Solar Inverter. Please read this manual thoroughly before installation and use. This inverter is a pure sine wave, on/off grid solar inverter designed for various applications. Key features include the ability to work without a battery, a high PV input voltage range (60-500VDC), a built-in 120A MPPT solar charger, smart battery charge design to optimize battery life, dual communication ports, and dual output.

2. Safety Information
Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury to persons:
- Ensure all wiring is performed by qualified personnel.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Keep the inverter away from flammable materials and moisture.
- Ensure proper ventilation around the inverter to prevent overheating.
- Disconnect all power sources (PV, AC, Battery) before performing any maintenance or wiring.
The inverter is equipped with comprehensive protections:

3. Package Contents
Upon opening the package, please verify that all items are present and undamaged:
- SUMRY MPS-VIII ECO Series Hybrid Solar Inverter Unit
- User Manual (this document)
- PV Cover
- Communication Cables (e.g., RS-232, USB)
- Mounting Hardware (screws, brackets)
4. Product Overview
The SUMRY MPS-VIII ECO Series Hybrid Solar Inverter features a robust design with a user-friendly interface. Below are the key components and their functions:



4.1. LCD Display and Function Buttons

The LCD display provides real-time operational status. Use the function buttons to navigate menus and configure settings:
- ESC: To exit setting mode.
- UP: To go to previous selection.
- DOWN: To go to next selection.
- ENTER: To confirm the selection in setting mode or enter setting mode.
4.2. LED Indicators
- INV/AC (Green Solid On): Output is powered by utility in Line Mode.
- INV/AC (Green Flashing): Output is powered by battery or PV in battery mode.
- CHG (Solid On): Battery is fully charged.
- CHG (Flashing): Battery is charging.
- FAULT (Red Solid On): Fault occurs in the inverter.
- FAULT (Red Flashing): Warning condition occurs in the inverter.
4.3. Dimensions and Communication Ports

The inverter has dimensions of 420mm (D) x 310mm (W) x 110mm (H). It features dual communication ports for Battery communication (RS 485, RS 232) and Wifi communication.
5. Setup and Installation
Follow these steps for proper installation and connection of your hybrid solar inverter. Refer to the product video for a visual guide.
5.1. Basic System Architecture

5.2. Wiring Instructions
- Prepare the Inverter: Carefully remove the inverter from its packaging. Unscrew and remove the PV cover from the rear panel.
- Connect Solar Panels (PV Input): Connect your solar panels to the PV1+ and PV1- terminals, and PV2+ and PV2- terminals. Ensure solar panels are recommended in series. The maximum PV input power is 6500W (for 6.2KW model) with a maximum PV input voltage of 500VDC.
- Connect AC Input: Connect the AC input from your utility grid or generator to the 'AC IN' terminals (L, N, Ground). The maximum AC input current is 40A.
- Connect Main AC Output: Connect your main household loads to the 'MAIN OUT' terminals (L, N).
- Connect Second AC Output: For additional loads, connect them to the 'SECOND OUT' terminals (L, N).
- Connect Batteries: Connect your 24V or 48V battery bank to the 'BATTERY' terminals (+, -). Ensure correct polarity. The inverter supports various battery types including Flooded, GEL, Lithium-iron phosphate, Lithium-ion, AGM/Sealed, and user-customized batteries.

Important: Ensure all connections are secure and properly insulated. Double-check all wiring before powering on the inverter.
6. Operating Instructions
Once all connections are made and verified, you can power on your inverter. The LCD display will show the operational status, and the LED indicators will provide quick visual feedback.
6.1. Powering On
After connecting all necessary cables, switch on the battery breaker first, then the AC input breaker (if connected to utility/generator), and finally the inverter's power switch. The inverter will perform a self-test and then begin operation.
6.2. Monitoring and Control (Smartess App)
The inverter supports remote monitoring and control via the Smartess App. This feature allows for effortless real-time monitoring of your solar system's performance.

Download the Smartess App from your device's APP store (iOS) or Google Play (Android). Connect the optional WiFi dongle to the inverter's communication port for wireless connectivity.
6.3. Powering Appliances
The inverter is capable of powering a wide range of home and office appliances, providing reliable pure sine wave AC power.

7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter:
- Cleaning: Keep the inverter's exterior clean and free from dust. Use a dry cloth for cleaning.
- Ventilation: Ensure that the ventilation openings are not blocked to allow for proper airflow and prevent overheating.
- Connections: Periodically check all electrical connections (PV, AC, Battery) for tightness and signs of corrosion. Tighten any loose connections.
- Environment: Ensure the inverter is installed in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
8. Troubleshooting
If you encounter issues with your inverter, refer to the LED indicators and the following general troubleshooting steps:
- Red Solid On FAULT LED: Indicates a fault. Check all connections, input/output voltages, and battery status. Consult the detailed error codes in the full user manual (if available) for specific fault identification.
- Red Flashing FAULT LED: Indicates a warning condition. This might be due to an abnormal operating condition that is not yet critical. Check system parameters on the LCD display.
- No Power Output: Verify AC input, battery connection, and PV input. Ensure the inverter is powered on and not in a fault state.
- Battery Not Charging: Check PV input voltage and current. Ensure solar panels are clean and properly connected. Verify battery health and connections.
For persistent issues, contact qualified technical support.
9. Specifications
Detailed technical specifications for the SUMRY MPS-VIII ECO Series Hybrid Solar Inverter:
| INVERTER MODEL | MPS-VIII ECO 4.2KW 24VDC | MPS-VIII ECO 6.2KW 48VDC |
|---|---|---|
| Line Mode Specifications | ||
| Input Voltage Waveform | Pure Sine Wave (Utility or Generator) | |
| Nominal Input Voltage | 230Vac | |
| Max AC Input Voltage | 300Vac | |
| Efficiency (Line Mode) | >95% (Rated R load, battery full charged) | |
| Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) | |
| Inverter Mode Specifications | ||
| Rated Output Power | 4.2KW | 6.2KW |
| Output Voltage Waveform | Pure Sine Wave | |
| Output Voltage Regulation | 230Vac±5% | |
| Output Frequency | 50HZ | |
| Peak Efficiency | 0.93 | |
| Overload Protection | 3s@≥150% load; 5s@101%~150% load | |
| Surge Capacity | 2* rated power for 5 seconds | |
| Nominal DC Input Voltage | 24Vdc | 48Vdc |
| Cold Start Voltage | 23.0Vdc | 46.0Vdc |
| No Load Power Consumption | 30W | 50W |
| Charge Mode Specifications | ||
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) | 100A | 100A |
| Max. PV Array Power | 6200W | 6500W |
| Nominal PV Voltage | 240Vdc | 360Vdc |
| PV Array MPPT Voltage Range | 60Vdc~500Vdc (Battery Connected) 120Vdc~500Vdc (Battery Disconnected) | |
| Max. PV Array Open Circuit Voltage | 500Vdc | |
| Max Charging Current (AC charger plus solar charger) | 120A | 120A |
| Grid-Tie Operation | ||
| Nominal Output Voltage | 220/230/240VAC | |
| Feed-in Grid Voltage Range | 195-253VAC | |
| Feed-in Grid Frequency Range | 49-51±1Hz/59-61±1Hz | |
| Nominal Output Current | 18.2A | 26.9A |
| Maximum Conversion Efficiency (DC/AC) | 97% | |
| Two Load Output Power | ||
| Full Load | 4200W | 6200W |
| Maximum Main Load | 4200W | 6200W |
| Maximum Second Load (battery model) | 1400W | 2066W |
| Main Load Cut Off Voltage | 26VDC | 52VDC |
| Main Load Return Voltage | 27VDC | 54VDC |
Additional Specifications:
- Size: 55cm x 43cm x 22cm
- Weight: 11KG - 13KG
- Certification: CE, FCC, RoHS
- Supported Battery Types: LiFePO4 Batteries, Lithium Batteries, Lead-acid, Gel, AGM/Sealed, User custom Battery.
- Work without battery: Yes
10. User Tips
- The SUMRY MPS-VIII ECO series inverter is designed to operate as a hybrid system and can function without batteries, offering flexibility in system design.
- Ensure the output voltage (220-240V AC) is compatible with your region's electrical standards before connecting appliances.
- For enhanced monitoring capabilities, consider models equipped with Wi-Fi for real-time data access via the Smartess App.
- This inverter is versatile and suitable for various applications, including PV systems, home use, RVs, boats, and outdoor activities.

11. Warranty and Support
This SUMRY MPS-VIII ECO Series Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact your authorized dealer or refer to the official SUMRY website for further information.