Hantek 6074BE

Contents

Hantek USB Virtual Oscilloscope Instruction Manual

Models: 6074BE, 6074BC, 6074BD, 6254BD, 6254BE

1. Introduction

The Hantek USB Virtual Oscilloscope is a PC-based 4-channel digital storage oscilloscope designed for comprehensive automotive diagnostics and general electronic measurements. It offers high sampling rates, broad bandwidth, and compatibility with Windows operating systems, making it a versatile tool for professionals and enthusiasts alike.

2. Package Contents

Please verify that all items are present in your package:

  • Hantek USB Virtual Oscilloscope Unit (Model: 6074BE, 6074BC, 6074BD, 6254BD, or 6254BE)
  • Oscilloscope Probes (quantity may vary by model, e.g., 2 passive probes)
  • BNC to Clip Cables (e.g., 2 or 3 gator clip lines)
  • USB Cable
  • Software CD (contains drivers and user manual)
  • Specific automotive accessories (e.g., HT307, HT19, HT18A, HT30A, HT25, depending on model)
Hantek Oscilloscope and accessories
Figure 1: Hantek Oscilloscope and included accessories.

3. Product Overview

The Hantek USB Virtual Oscilloscope features a compact and durable design with an anodized aluminum casing for heat and abrasion resistance. It connects to your computer via a USB 2.0 interface, drawing power directly from the USB port, eliminating the need for an external power supply.

Side view of oscilloscope with labeled ports
Figure 2: Side view of the Hantek Oscilloscope with labeled ports.

Interface Description:

  • USBXI Interface: For connecting to the PC.
  • USB Interface: Standard USB connection for data and power.
  • CH1, CH2, CH3, CH4 Trigger Sources: BNC connectors for connecting probes to the measurement points.

4. Setup Instructions

4.1. Software Installation

  1. Insert the provided software CD into your computer's CD/DVD drive.
  2. Follow the on-screen instructions to install the Hantek oscilloscope software and drivers.
  3. Alternatively, download the latest software and drivers from the official Hantek website for compatibility with Windows 7, Windows 8, and Windows 10.

4.2. Hardware Connection

  1. Connect the Hantek oscilloscope unit to your computer using the supplied USB cable. The device is plug-and-play and does not require an external power supply.
  2. Attach the appropriate probes (e.g., passive probes, BNC-clip cables, or specialized automotive probes like HT307, HT19, HT18A, HT30A, HT25) to the CH1-CH4 trigger source inputs on the oscilloscope unit.
  3. Connect the other end of the probes to the desired measurement points on the circuit or vehicle component.
Oscilloscope connected to a car engine, displaying waveforms on a tablet
Figure 3: Hantek Oscilloscope connected for automotive diagnostics.

For a visual guide on connecting the oscilloscope for automotive testing, please refer to the demonstration video below:

Video 1: Demonstration of Hantek Oscilloscope setup for automotive ignition testing.

5. Operating Instructions

The Hantek software provides a user-friendly interface for various measurement and diagnostic tasks.

5.1. General Oscilloscope Functions

  • Waveform Display: View real-time waveforms on your computer screen.
  • Automatic Measurement: Access over 20 types of automatic measurement functions including Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, and Duty Cycle.
  • Trigger Function: Utilize resourceful trigger modes such as Edge, Pulse, Video, and Alternative to stabilize waveforms.
  • Cursor Tracking: Dynamic cursor tracking allows for precise measurement of waveform parameters.
  • Waveform Record & Replay: Capture and review waveform data for detailed analysis.
  • Waveform Processing: Perform mathematical operations (+,-,x,÷,FFT, Invert), adjust afterglow, and control lightness.
  • FFT Spectrum Analyzer: Analyze frequency components of signals.
Software interface displaying waveforms with high sampling rate
Figure 4: Software interface showing high sampling rate waveform display.
Software interface showing measurement options
Figure 5: Software interface with various measurement options.

5.2. Automotive Diagnostic Functions

The Hantek oscilloscope is equipped with over 80 types of automotive measurement functions, categorized as follows:

  • First Diagnosis: Intake manifold vacuum & ignition, petrol fumes adjusting valve vacuum & ignition, idle exhaust ignition, starting exhaust ignition.
  • Ignition: Primary and secondary ignition analysis.
  • Sensors: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position.
  • Bus Diagnosis: CAN bus data examination, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus.
  • Performer: Petrol/Diesel engine performance analysis.
  • Startup & Charge: Analysis of vehicle starting and charging circuits.
Software interface showing vehicle diagnosis menu
Figure 6: Software interface for vehicle diagnosis menu.
Diagram of a car with 'MORE THAN 80' CAR DIAGNOSTICS' text
Figure 7: The oscilloscope supports over 80 car diagnostic functions.

For a detailed demonstration of automotive diagnostic features, please watch the video below:

Video 2: Product demonstration video showcasing various features.

6. Specifications

Below are the general specifications for the Hantek 6000 Series USB Virtual Oscilloscopes. Specific models may have slight variations.

Hantek 6000 Series Selection Table
Figure 8: Hantek 6000 Series Selection Table.
Hantek 6074BE Specifications
FeatureSpecification
ModelHantek6074BE
Bandwidth70MHz
Channel4 CH
Real-time Sampling Rate1GSa/s
Memory Depth64K
Time Base Precision±50ppm
Time Base Range2ns/div-1000s/div (1-2-4 sequences)
Input Impedance1MΩ 25pF
Input Sensitivity2mV/div~10V/div
Vertical Resolution8Bit
Vertical Displacement Range2mV ~ 10V/div @ x1 probe; 20mV ~ 100V/div @ x10 probe; 200mV ~ 1000V/div @ x100 probe; 2V ~ 10000V/div @ x1000 probe
DC Gain Accuracy±3%
Bandwidth20MHz
Trigger ModeEdge, Pulse, Video, Alternative
Trigger SourceCH1, CH2, CH3, CH4
Waveform Signal Process+,-,x,÷,FFT, Invert
Cursors MeasurementCross, Trace, Horizontal, Vertical
Auto MeasurementVpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Volume175mm * 105mm * 25mm
Weight0.9KG

Note: The 6074BC model does not include the car test option function, but other features are identical to the 6074BE. The 6074BD model includes a 1CH signal generator.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid abrasive cleaners or solvents.
  • Storage: Store the oscilloscope in a cool, dry place away from direct sunlight and extreme temperatures.
  • Software Updates: Regularly check the Hantek website for software and driver updates to ensure optimal performance and access to new features.
  • Probe Care: Handle probes carefully. Avoid bending or stressing the cables excessively.

8. Troubleshooting

  • Software Not Recognizing Device: Ensure all drivers are correctly installed from the provided CD or the official Hantek website. Try connecting to a different USB port.
  • No Waveform Display: Check probe connections to both the oscilloscope and the measurement point. Verify that the input signal is within the device's measurement range.
  • Incorrect Readings: Calibrate the oscilloscope if available in the software settings. Ensure probes are correctly configured (e.g., 1x, 10x attenuation settings).
  • Software Language Issues: The software supports multiple languages. Navigate to the 'Utility' menu and select 'Language' to choose your preferred language.
Software interface showing language selection
Figure 9: Language selection in the Hantek software interface.

9. User Tips

  • Portability: The compact size and USB power make this oscilloscope ideal for mobile use and business trips.
  • Expandability: A single computer can connect with multiple Hantek oscilloscopes, allowing for easy expansion of channel numbers for complex measurements.
  • Software Development: For advanced users, a secondary development library (DLL) and examples for Labview, VB, VC, and QT are provided.
  • Attenuators: Some models come with attenuators (e.g., HT307, HT19, HT18A, HT30A, HT25) which are crucial for measuring higher voltages safely and accurately. Ensure you use the correct attenuator for your application.

10. Warranty and Support

Hantek products are factory brand new and genuine. For any product-related inquiries or technical support, please refer to the contact information provided on the official Hantek website or the documentation included with your product. Regular software updates are provided to enhance functionality and performance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.