1. Introduction
Thank you for choosing the MEKEDE 12.5 Inch Android Multimedia Head Unit. This intelligent multimedia system is designed to enhance your driving experience with advanced features like Android 13, Snapdragon 680 processor, Carplay, Android Auto, DSP, 4G LTE, and more. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and safety.

Figure 1: MEKEDE 12.5 Inch Android Multimedia Head Unit installed in an Audi dashboard.
2. Vehicle Compatibility
This multimedia head unit is specifically designed for Audi A6, A6L, A7, C7, RS6, RS7, S6, and S7 models manufactured between 2012 and 2018. It is engineered to integrate seamlessly with your vehicle's existing systems.
- Compatible with cars both with and without an original screen.
- Compatible with cars both with and without original navigation function.
- Compatible with cars both with and without optic fiber.
- Supports factory Canbus, iDrive control, steering wheel controls, and displays original car information.
- Supports the original radio and built-in Bluetooth.
- Supports original rear view camera and parking trajectory/radar.
- Supports automatic AUX switching.
- Allows switching back to display the original screen and functions.

Figure 2: Visual comparison of the dashboard before and after installing the MEKEDE head unit.

Figure 3: Detailed compatibility information for various Audi models and years.
3. Package Contents
Please check the package carefully to ensure all items are present:
- Host Equipment (Main Head Unit)
- Power Cable
- Base
- GPS Antenna
- AUX Cable
- 4G Antenna
- MIC
- Cable with 4G Card Slot

Figure 4: All components included in the package.
4. Installation Notes
Professional installation is highly recommended to avoid damage to the device or your vehicle. Before installation, please note the following:
- AUX/AMI Port Check: Confirm whether your car has an AUX or AMI port before purchase. If your car has AMI but not AUX, you may need to purchase an AMI cable separately.
- Right-Hand Drive Vehicles: If your car is a right-hand drive model, please contact the seller separately as additional frames may be required.
- Version Check: Before installation, click the "Setup" icon, then open the "Setup MMI" menu to check if your car system is "RMC", "HN+R", or "MHI2". This is crucial for proper integration.

Figure 5: Instructions for checking AUX or AMI input.

Figure 6: Note regarding right-hand drive vehicle compatibility.

Figure 7: Guide to choosing the correct MMI version.
5. Key Features
The MEKEDE Multimedia Head Unit offers a rich set of features:
- Operating System: Android 13
- Processor: Qualcomm Snapdragon 680, 8-Core
- Memory: 8GB RAM + 256GB ROM
- Display: 12.5-inch HD screen (1920*720 resolution), optional blue anti-glare HD screen available.
- Connectivity: Built-in 4G LTE, Wi-Fi, Bluetooth 5.1.
- Audio: DSP (Digital Sound Processor) for enhanced sound effects.
- Integration: Wireless Carplay & Android Auto (no additional dongle needed for built-in option), Mirror Link (wired and wireless for iPhone and Android).
- Navigation: Built-in GPS with support for various map applications (iGO, Navitel, Sygic, Yandex, Google, Waze, AMAP).
- Safety Features: Supports AHD 1080P rear view camera, ADAS DVR anti-collision warning driving recorder (DVR not included), original parking trajectory/radar display.
- User Interface: Three customizable UI styles.
- Multitasking: Split-screen functionality to run two applications simultaneously.
- Car Information: Displays speed, fuel level, oil pressure, and safety warnings on the dashboard.
- Voice Control: Intelligent voice control for hands-free operation (optional).
- AV Output: Full AV output to connect to headrest displays for rear passengers.
- Extensible Functions: Support for optional OBD II, DAB+, and TPMS (accessories not included).

Figure 8: Core specifications of the head unit.

Figure 9: Customizable UI options.

Figure 10: Split-screen functionality.

Figure 11: Carplay and Android Auto integration.

Figure 12: 4G LTE and WiFi connectivity.

Figure 13: Bluetooth 5.1 features for calls and music.

Figure 14: DSP processor for enhanced audio.

Figure 15: AHD 1080P rear view camera display.

Figure 16: ADAS DVR anti-collision warning system.

Figure 17: Built-in GPS navigation.

Figure 18: Full AV output for rear displays.

Figure 19: Optional OBD II and DAB+ modules.

Figure 20: Optional TPMS support.

Figure 21: Processor comparison for different versions.
6. Operating Instructions
6.1 Basic Navigation and UI
The head unit features a responsive touchscreen interface. You can navigate through menus by swiping and tapping. The system offers three distinct UI styles that can be changed according to your preference. The factory setting code for UI switching is 1314.

Figure 22: UI1 Interface Example.

Figure 23: UI2 Interface Example.

Figure 24: UI3 Interface Example.
6.2 Media Playback
The unit supports various digital media formats including MP3, MP4, WMA, and JPEG. You can play videos and music from local storage or connected devices.
6.3 Bluetooth Connection
To connect your phone via Bluetooth 5.1:
- Go to the Bluetooth settings on the head unit.
- Enable Bluetooth on your mobile phone and search for available devices.
- Select "FSC-CARKIT" (or similar name) from the list and enter the PIN (default: 1234).
- Once connected, you can make hands-free calls, sync contacts, and stream music.
6.4 Wi-Fi and 4G LTE
To connect to Wi-Fi:
- Go to Settings > Network > Wi-Fi.
- Turn on Wi-Fi and select your desired network.
- Enter the password if prompted.
The built-in 4G module allows for cellular data connectivity. Insert a compatible 4G SIM card into the designated slot to access mobile data.
6.5 Carplay & Android Auto
If your unit has the built-in Carplay option, it supports both wireless Carplay and Android Auto. To connect:
- Ensure Bluetooth is enabled and paired.
- Open the "ZLINK5" application on the head unit and wait for connection.
- Alternatively, Carplay can also be connected via a USB cable.
6.6 Split Screen
To use the split-screen feature, open an application, then use the multitasking view to drag another application to the side of the screen. This allows two applications to be displayed and operated simultaneously.
6.7 Voice Control (Optional)
If your unit supports voice control, activate it by saying the designated wake-up phrase or tapping the voice assistant icon. You can then issue commands for navigation, music, calls, and more, enhancing driving safety.
6.8 Car Information Display
Access the "Car Info" or "Dashboard" application to view real-time vehicle data such as speed, fuel level, oil pressure, and safety warnings.

Figure 25: Car information display.
6.9 Video Demonstration
Video 1: Demonstration of UI navigation, media playback, equalizer, split screen, Bluetooth, Wi-Fi, web browsing, file management, and dashboard display.
7. Specifications
| Feature | Description |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Android 13 |
| Processor | Qualcomm Snapdragon 680 (8-Core) |
| RAM | 8G |
| ROM | 256G |
| Display Size | 10.25 inch, 12.5 inch |
| Resolution | 1920*720 (for both 10.25 and 12.5 inch) |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.8kg |
| Max External Memory | 256GB |
| TF/Micro SD Slot | 0 |
| Din | Double Din |
| Interface | Plug and play |
| Special Features | Built-In Speaker/Microphone, Wi-Fi function, Steering Wheel Control, 3G/4G Network Support, Can-Bus Support, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Chinese Simplified/Traditional, Arabic, German, Russian, French, English, etc.) |
| Certification | CE |
| Material | Good quality materials |
| Built-in DVD Player | No |
| Built-in CD player | No |
8. Troubleshooting
If you encounter issues with your MEKEDE Multimedia Head Unit, please refer to the following common problems and solutions:
- No Power/Unit Not Turning On:
- Check all power cable connections to ensure they are secure.
- Verify the car's fuse related to the head unit.
- No Sound:
- Ensure the volume is not muted or set too low.
- Check AUX cable connection if using external audio input.
- Verify speaker connections.
- If using original radio, ensure AUX switching is functioning correctly.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on both the head unit and your phone.
- Delete previous pairings and try reconnecting.
- Restart both devices.
- Wi-Fi/4G Connectivity Problems:
- For Wi-Fi, ensure the password is correct and the signal is strong.
- For 4G, ensure the SIM card is correctly inserted and activated, and check network coverage.
- System Slow/Freezing:
- Close unnecessary background applications.
- Clear cache from time to time.
- If the issue persists, a factory reset might be necessary (see User Tips).
- GPS Not Working/Inaccurate:
- Ensure the GPS antenna is properly installed and has a clear view of the sky.
- Check GPS settings in the system.
- Screen Not Responding:
- Perform a soft reset by pressing the RST button (if available) or restarting the car.
9. User Tips
- Verify Car System: Always confirm your car's MMI version (RMC, HN+R, or MHI2) before installation to ensure proper compatibility and functionality.
- AUX/AMI Check: Double-check if your vehicle has an AUX or AMI port. This is crucial for audio integration.
- Utilize Split-Screen: Take advantage of the split-screen feature for enhanced multitasking, such as running navigation and music simultaneously.
- Explore UI Options: Experiment with the three different UI styles to find the one that best suits your preference.
- Voice Control for Safety: If equipped, use the intelligent voice control feature to manage functions hands-free, promoting safer driving.
- Regular Updates: Keep an eye out for firmware and software updates from MEKEDE to ensure you have the latest features and performance improvements.
10. Warranty and Support
Your MEKEDE Multimedia Head Unit comes with a 1-year factory warranty. This warranty covers manufacturing defects and ensures the quality of the product. In addition, MEKEDE provides free updates for firmware, software, UI, and GPS navigation maps.
For any issues or support inquiries, please contact MEKEDE customer service. If a product problem occurs within 365 days of receipt, you may be eligible for a free return and refund within 15 days, or a direct replacement of the unit. Please contact customer service to communicate any issues before initiating a return or dispute.

Figure 26: MEKEDE Service Guarantees.