1. Introduction
Thank you for choosing the ORIA Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, along with weather forecasts, to help you monitor your environment effectively. Please read this manual carefully before use to ensure proper operation and maintenance.

Image 1: ORIA Wireless Weather Station Main Unit and Remote Sensor
2. Package Contents
Please check the package for the following items:
- 1 x Wireless Thermometer Weather Station (Main Unit)
- 1 x Wireless Sensor (Remote Sensor)
- 1 x Operation Instruction Manual

Image 2: Package Contents
3. Setup Guide
3.1. Unpacking and Checking
- Carefully remove the device from its packaging and remove all protective films. Keep packaging materials out of reach of children.
- Dispose of packaging materials according to local regulations.
- Verify that all included items are present and that the wireless thermometer shows no signs of damage.
3.2. Inserting Batteries
Ensure you have the required batteries (not included) before proceeding:
- For the Wireless Sensor: 2 x AAA (LR03) 1.5V batteries.
- For the Main Unit: 3 x AAA (LR03) 1.5V batteries.
- Wireless Sensor: Open the battery compartment. Insert 2 x AAA batteries, paying close attention to correct polarity (+/-). The red LED indicator will flash briefly when the sensor transmits data.
- Main Unit: Open the battery compartment. Insert 3 x AAA batteries, ensuring correct polarity (+/-). Close the battery compartment.
Note: The main unit's display screen will turn off after 10 seconds of inactivity to save power. Press the LIGHT button to activate the backlight and display.
3.3. Setting Temperature Unit and Weather Symbol
Upon first power-on after battery installation, the main unit will enter setup mode:
- Temperature Unit: The °C/°F symbol will start flashing (default is °F). Press the SET button to toggle between Celsius (°C) and Fahrenheit (°F). Press the MIN/MAX button to save your selection and proceed.
- Weather Symbol: The weather symbol will start flashing (default is half sunny). This symbol adjusts automatically based on barometric pressure. To manually adjust or shorten calibration time, press the SET button repeatedly to cycle through available weather icons: Sunny, Partly Cloudy, Overcast, Rain, Thunderstorm, Snow, and Snowstorm. Press the MIN/MAX button to save your selection.
3.4. Pairing the Outdoor Sensor
The main unit will automatically attempt to pair with the outdoor sensor for 3 minutes after battery installation. If pairing does not occur automatically:
- Ensure both the main unit and the outdoor sensor are set to the same channel (if you have multiple sensors, see section 3.6).
- Press the CHANNEL button on the main unit to select the desired channel (e.g., CH1).
- Press and hold the CHANNEL button on the main unit until the sensor receiving icon (signal bars) starts flashing. This indicates it is searching for the sensor.
- Once connected, the sensor receiving icon will become stable.
Note: If you replace the sensor batteries or if the RF signal is lost, you may need to press and hold the CHANNEL button on the main unit again to re-establish the connection.
3.5. Placement Guidelines

Image 3: Flexible Placement Options
3.5.1. Outdoor Sensor Placement
- The sensor can be hung or placed. For best results, place it under a porch or eaves to protect it from direct rain and sunlight.
- Ensure the sensor is positioned vertically to allow for proper moisture drainage.
- The maximum transmission range is 100 meters (328 feet) in an open area.
- Avoid placing the sensor near large metal objects, thick walls, or other obstructions that can block the signal.
- Keep the sensor away from direct heat sources or vents.
- In extremely low winter temperatures, battery performance may be reduced, affecting transmission range.
3.5.2. Main Unit Placement
- Place the main unit on a flat surface using its desktop stand, or mount it on a wall using the hanging holes on the back.
- Position the main unit at least 6 feet (2 meters) away from electronic devices such as cordless phones, gaming systems, televisions, microwaves, and Wi-Fi routers, as these can cause interference.
- Ensure the main unit is within the transmission range of the outdoor sensor (up to 100 meters / 328 feet in open air).
- Avoid placing the main unit directly on the floor, as this can restrict its range.
3.6. Adding Extra Sensors (Optional)
The weather station supports up to three wireless sensors. To add additional sensors:
- For each new sensor, open its battery compartment and locate the sliding switch (1, 2, or 3). Set each sensor to a different channel (e.g., CH1 for the first, CH2 for the second, CH3 for the third).
- Insert batteries into the new sensor(s).
- On the main unit, press the CHANNEL button to cycle to the corresponding channel for the new sensor (e.g., CH2 for the second sensor).
- Press and hold the CHANNEL button on the main unit until the signal icon flashes, indicating it is searching for the new sensor.
- Once connected, the signal icon will become stable. Repeat for any other additional sensors.
4. Operating Instructions
4.1. Display Overview
The LCD display provides comprehensive information:

Image 4: Easy-to-Read Display
- Weather Forecast Icon: Displays predicted weather conditions.
- Sensor Channel: Indicates the currently displayed outdoor sensor channel (CH1, CH2, or CH3).
- Outdoor Low Battery Indicator: Appears when the outdoor sensor's batteries are low.
- Outdoor Temperature Trend: Shows if the outdoor temperature is rising, falling, or constant.
- Outdoor Temperature: Current temperature reading from the outdoor sensor.
- Outdoor Humidity Trend: Shows if the outdoor humidity is rising, falling, or constant.
- Outdoor Humidity: Current humidity reading from the outdoor sensor.
- Indoor Humidity: Current humidity reading from the main unit.
- Indoor Low Battery Indicator: Appears when the main unit's batteries are low.
- Stored MAX/MIN Indoor Temperature and Humidity: Displays the highest/lowest recorded indoor values.
- Indoor Temperature: Current temperature reading from the main unit.
- Stored MAX/MIN Outdoor Temperature and Humidity: Displays the highest/lowest recorded outdoor values.
- Temperature Alarm (Ice Alert): Snowflake icon indicates risk of frost.
4.2. Button Functions
- MIN/MAX Button:
- Press once to display the maximum (MAX) recorded indoor and outdoor temperature/humidity values.
- Press again to display the minimum (MIN) recorded indoor and outdoor temperature/humidity values.
- Press a third time to return to current readings.
- Press and hold to clear the stored MAX/MIN values.
- LIGHT Button: Short press to activate the backlight for 10 seconds.
- CHANNEL Button:
- Press to cycle through data from different outdoor sensors (CH1, CH2, CH3).
- Press and hold to initiate a search for outdoor sensors (for pairing or re-pairing).
- SET Button: Press and hold to enter temperature unit and weather symbol setting mode.
4.3. Daily Stored MIN/MAX Temperature and Humidity
The MAX/MIN temperature and humidity records automatically reset every 24 hours after power-on. You can manually view and clear them as described in the MIN/MAX button functions above.
4.4. Backlight Activation
A short press of the LIGHT button will illuminate the display for 10 seconds, making it easy to read in low-light conditions.
4.5. Low Battery Indicator
When the batteries in either the main unit or the outdoor sensor are running low, a battery icon will appear on the display. Replace the batteries in the affected device as soon as possible to ensure accurate readings and proper transmission. After replacing batteries, you may need to restart the wireless thermometer or re-pair the sensor.
4.6. Weather Trend
The display shows arrows indicating the trend for both temperature and humidity:
- ↗: Rising
- →: Constant
- ↘: Falling
4.7. Weather Forecast Icons
The weather station predicts conditions for the next 12-24 hours based on its built-in barometric pressure sensor. Allow 7-10 days for initial calibration. The accuracy of the forecast is approximately 75%.
- Icons include: Sunny, Partly Cloudy, Overcast, Rain, Thunderstorm, Snowfall, Heavy Snowfall.
- Ice Alert: If the outdoor temperature is between 1°C (33.8°F) and -1°C (30.2°F), a snowflake symbol will flash, indicating a risk of frost. If the temperature drops below -1°C, the snowflake symbol will be constantly displayed.
- Snow Forecast: If the outdoor temperature is below -1°C (30.2°F) and the forecast is for Rain or Thunderstorm, the station will display Snow.
5. Maintenance and Safety
5.1. Care and Maintenance
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Always use the correct size and type of batteries recommended for this device.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and the device contacts prior to battery installation.
- Ensure batteries are installed with correct polarity (+ and -).
- Remove batteries from the equipment if it will not be used for an extended period.
- Promptly remove expired batteries.
- Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
5.2. Safety Information
- This device can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they have been given supervision or instruction concerning safe use and understand the hazards involved.
- Keep the device away from children under the age of 8.
- Cleaning and user maintenance should not be performed by children without supervision.
- Children should be supervised to ensure they do not play with the device.
- Do not immerse the device in water or other liquids. Electric shock hazard! Do not use the device in areas where it may be wet, such as near a sink.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Outdoor temperature or humidity shows "---" (dash icon) | This indicates wireless interference or a lost connection. Remove and reinsert batteries in both the outdoor sensor and the main unit. Place them close together (within a couple of feet) for about 20 minutes to re-establish a strong connection. Ensure no major obstructions are between them. |
| Display screen not working | Check battery polarity and ensure batteries are fresh and correctly inserted in both units. Replace batteries if necessary. |
| Inaccurate temperature or humidity readings |
|
| Difficulty opening outdoor unit battery cover | Apply gentle, firm pressure and slide the cover. If it's stiff, try using a small, flat tool (like a coin) in the designated slot to pry it open carefully. |
7. Specifications
| Feature | Main Unit (Display Console) | Wireless Sensor (Remote) |
|---|---|---|
| Power Supply | 3 x AAA (LR03) 1.5V (not included) | 2 x AAA (LR03) 1.5V (not included) |
| Temperature Range | -9.9°C ~ 50°C (14.2°F ~ 122°F) | -50°C ~ 70°C (-40°F ~ 158°F) |
| Humidity Range | 1% - 99% RH | 10% - 99% RH |
| Temperature Accuracy | ±1°C (±1.8°F) for 0°C~40°C; ±2°C (±3.6°F) otherwise | |
| Humidity Accuracy | ±5% RH (40%-80%); ±8% RH (20%-39% & 81%-95%) | |
| Resolution | 0.1°C / 1% RH | |
| Data Refresh Rate | Every 30 seconds | CH1: 31s; CH2: 32s; CH3: 33s |
| Transmission Frequency | 433 MHz | |
| Transmission Range | Up to 100 meters (328 feet) in open area | |
| Protection Type | N/A | IPX4 (Splash water protection) |
| Dimensions | 9.5 x 7.8 cm | 7.5 x 6 cm |
| Battery Life | N/A | Min. 12 months |

Image 5: Precision and Sensitivity Details
8. User Tips
- Optimal Placement: For best outdoor readings, place the sensor in a shaded, well-ventilated area, protected from direct rain and sun. Many users find placing it under eaves or a porch works well.
- Range Check: The sensor has a good range (up to 35m reported by users), but ensure there are no major obstructions like thick walls or large metal objects between the sensor and the main unit.
- Easy to Use: The display is clear and the device is generally straightforward to set up and operate.
- Battery Cover: Some users found the outdoor unit's battery cover a bit stiff to open initially. Apply gentle, firm pressure or use a small tool if needed.
- Versatile Use: This weather station is suitable for various environments, including homes, offices, gardens, baby rooms, greenhouses, and warehouses.
9. Frequently Asked Questions (FAQ)
- Q: Which season is this product suitable for?
- A: This product is designed for outdoor use and is suitable for all seasons.
- Q: In which scenes can this product be used?
- A: This product can be used in various scenes such as home, office, garden, baby room, greenhouse, and warehouse.
- Q: Where can this product be placed?
- A: The remote sensor is designed for outdoor placement, while the main unit is typically placed indoors for easy viewing.
- Q: What is the product category?
- A: It falls under the category of Temperature Humidity Meters.
- Q: How can this product be used?
- A: This wireless weather station is used to measure and display indoor and outdoor temperature and humidity.
10. Warranty and Support
For warranty information and customer support, please refer to the seller's terms of service or contact your point of purchase. Keep your purchase receipt as proof of purchase.