SUMRY MPS V-MAX 10.2kw

Contents

SUMRY MPS-V MAX Series 10.2KW Hybrid Solar Inverter User Manual

Model: MPS V-MAX 10.2kw

1. Introduction

The SUMRY MPS-V MAX Series 10.2KW Hybrid Solar Inverter is a versatile and powerful solution for both on-grid and off-grid solar energy systems. Featuring pure sine wave technology, it ensures a stable and continuous power supply, protecting sensitive appliances. This inverter is designed to convert reliable, clean, and quiet AC energy, providing an efficient power source for your home or office, helping you say no to power cuts.

Key features include an output power factor of 1.0, WiFi & GPRS connectivity for iOS and Android, the ability to run without a battery, one-key restoration to factory settings, and built-in lithium battery automatic activation. It also boasts a built-in 160A MPPT solar charger, a high PV input voltage range (90-500VDC), a built-in anti-dust kit for harsh environments, smart battery charge design, dual output, and dual PV input.

2. Setup and Installation

2.1 Unboxing and Initial Inspection

Carefully unbox the inverter and inspect for any signs of damage. Ensure all components are present as per the packing list.

Video: Unboxing and initial overview of the SUMRY Hybrid Solar Inverter.

2.2 System Architecture Overview

The inverter supports a hybrid system architecture, integrating solar panels, a generator or utility grid, and a battery bank to power home appliances.

Basic System Architecture Diagram
Figure 1: Basic System Architecture showing connections between solar power, generator/utility, battery, inverter, and home appliances.

2.3 Physical Dimensions and Interface

The inverter features a touch button interface and multiple connection ports on the rear panel.

Inverter Dimensions and Touch Button
Figure 2: Inverter dimensions (D*W*H 530*420*160mm) and location of the touch button interface.
Inverter Rear Panel Connections
Figure 3: Rear panel connections including AC In, Main Out, Second Out, PV1 and PV2 inputs, Battery input, WiFi communication (RS-232) port, and Battery communication (RS-485) port.

2.4 Wiring Connections

Follow these steps for proper wiring. Always ensure power is disconnected before making any connections.

  1. PV Input Connection: Connect your solar panels to the PV1+ and PV1- terminals, and PV2+ and PV2- terminals. Solar panels are recommended to be connected in series. The inverter supports a high PV input voltage range of 90-500VDC.
  2. AC Input Connection: Connect the AC input from your utility grid or generator to the AC IN (L, N) terminals.
  3. Battery Connection: Connect your 48V battery bank (Lithium, Lead-acid, LiFePO4, etc.) to the BATTERY + and - terminals. Ensure correct polarity.
  4. AC Output Connection: Connect your main load to the MAIN OUT (L, N) terminals and secondary load to the SECOND OUT (L, N) terminals. The inverter provides dual AC output.
  5. Communication Ports: Connect RS232/RS485 cables for battery communication and WiFi/GPRS modules for remote monitoring via the Smart App.
Dual Communication Ports and Dual Output
Figure 4: Detailed view of dual communication ports (RS232, RS485, WiFi, BMS) and dual AC outputs (Main Out, Second Out).
Battery Connection Diagram
Figure 5: Example diagram for connecting multiple 12V batteries in series to achieve a 48V battery bank for the inverter.

The inverter is compatible with multiple battery types including Flooded, Gel, Lithium-ion phosphate, Lithium-ion, AGM/Sealed, and user-customizable battery settings.

Battery Compatibility
Figure 6: Supported battery types: Flooded, Gel, Lithium-ion phosphate, Lithium-ion, AGM/Sealed, and User custom Battery.

3. Operating Instructions

3.1 LCD Display and Function Buttons

The inverter features an LCD display and touch buttons for easy operation and monitoring.

LCD Display and Function Buttons
Figure 7: LCD Display and Function buttons (ESC, UP, DOWN, ENTER) for navigation and settings.

Function Keys:

  • ESC: To exit setting mode.
  • UP: To go to previous selection.
  • DOWN: To go to next selection.
  • ENTER: To confirm the selection in setting mode or enter setting mode.

3.2 LED Indicators

The LED indicators provide quick status updates:

LED IndicatorColorStatusMessage
INV/ACGreenSolid OnOutput is powered by utility in Line mode.
FlashingOutput is powered by battery or PV in battery mode.
CHGGreenSolid OnBattery is fully charged.
FlashingBattery is charging.
FAULTRedSolid OnFault occurs in the inverter.
FlashingWarning condition occurs in the inverter.

3.3 Powering Appliances

This inverter is capable of powering a wide range of home and office appliances, providing reliable energy when needed.

Appliances Powered by Inverter
Figure 8: Examples of appliances that can be powered by the inverter, including kitchen appliances, air conditioning, and power tools.

3.4 Remote Monitoring

Monitor and control your inverter via the Smart App available for iOS and Android devices. An optional WiFi/GPRS module is required for this functionality.

Smart App Monitoring
Figure 9: Monitor and control your inverter using the Smart App on your mobile device (optional WiFi module shown).

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your SUMRY Hybrid Solar Inverter.

  • Cleaning: Periodically clean the exterior of the inverter, especially the ventilation grilles, to prevent dust buildup. The built-in anti-dust kit helps in harsh environments, but regular cleaning is still recommended.
  • Connections Check: Annually inspect all wiring connections (PV, AC, Battery, Load) to ensure they are secure and free from corrosion.
  • Battery Health: The inverter features smart battery charge design to optimize battery life and built-in lithium battery automatic activation. For other battery types, follow the manufacturer's guidelines for maintenance.
  • Firmware Updates: Check for available firmware updates via the Smart App or manufacturer's website to ensure your inverter has the latest features and bug fixes.

5. Troubleshooting

This section provides guidance on common issues. Refer to the LED indicators for initial diagnosis.

5.1 Common Issues and Solutions

  • No Power Output: Check AC input, battery connection, and PV input. Ensure all circuit breakers are on. Refer to the INV/AC LED indicator.
  • Battery Not Charging: Verify PV input and AC input connections. Check the CHG LED indicator. Ensure solar panels are receiving adequate sunlight.
  • Fault/Warning Indication: If the FAULT LED is solid red or flashing, refer to the detailed error codes in the full manual (if available) or contact technical support.

5.2 Comprehensive Protections

The inverter is equipped with multiple protection features to ensure safe operation:

Comprehensive Protections
Figure 10: Inverter protection features including Overload Protection, Overheating Protection, High/Low Voltage Protection, Battery Protection, Short Circuit Protection, Overcurrent Protection, Anti Reverse Protection, and Power Failure Protection.

6. Specifications

Detailed technical specifications for the SUMRY MPS-V MAX Series 10.2KW Hybrid Solar Inverter:

Product Data Sheet Part 1
Figure 11: Product Data Sheet (Part 1) covering PV Input (DC), Grid Output (AC), Efficiency, and Two Load Output Power.
Product Data Sheet Part 2
Figure 12: Product Data Sheet (Part 2) covering Off-Grid Operation, AC Input, PV Input (DC), Battery Mode Output (AC), Battery & Charger, General, Interface, Environment, and Standard.
FeatureSpecification
ModelMPS V-MAX 10.2kw
Rated Output Power10200W / 10200VA
Max. PV Input Power10200W (5400W + 5400W)
Nominal DC Voltage (PV Input)360VDC
Max. DC Voltage (PV Input)500VDC
MPPT Voltage Range90-450VDC
Max. Solar Charging Current160A
Nominal Output Voltage (AC)220/230/240VAC
Output Voltage Range (AC)195-253VAC
Nominal Output Current44.3A
Output Frequency50/60Hz (Auto sensing)
Wave FormPure Sine Wave
Max. Conversion Efficiency (DC/AC)98%
Battery Nominal DC Voltage48VDC
Max. AC Charging Current140A
Dimensions (D*W*H)530*420*160mm
Net Weight14.7 kg
Operating Temperature-10°C to 50°C
Humidity5% to 95% Relative Humidity (Non-condensing)
CertificationCE, FCC, RoHS
Is Smart DeviceYes

7. Warranty and Support

7.1 Warranty Information

Specific warranty terms and conditions for the SUMRY MPS-V MAX Series 10.2KW Hybrid Solar Inverter should be obtained directly from the seller or manufacturer at the time of purchase. Please retain your proof of purchase for warranty claims.

7.2 After-Sales Service

For technical support, troubleshooting assistance, or any product-related inquiries, please contact the SUMRY Official Store directly through the platform where you made your purchase.

Additional services provided by the seller include:

  • Free Returns: Free returns are available within 15 days of delivery.
  • Fast Delivery Guarantee: The seller offers a fast delivery service. A $1.00 coupon code may be provided if delivery is delayed.
  • Refunds for Issues: Refunds are available if the package is lost or if items are damaged upon arrival. A full refund is also offered if no delivery occurs within 60 days.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.