Volvo XC90 2007-2013 LED DRL Turn Signal

Contents

LED DRL Turn Signal Daytime Running Light for Volvo XC90 (2007-2013)

Instruction Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your new LED Daytime Running Lights (DRL) and Turn Signal lamps. These lights are specifically designed to enhance the visibility and safety of your Volvo XC90 model years 2007-2013.

The product features high-luminance LEDs, a waterproof reflector for all weather conditions, and a long lifespan of up to 50,000 hours, ensuring minimal maintenance. The lights function as both white daytime running lights and amber flashing turn signals.

2. Setup and Installation

The LED DRL and Turn Signal lamps are designed for a direct replacement installation on the front left and right sides of your Volvo XC90 (2007-2013).

2.1 Pre-Installation Check

  • Verify that the product is compatible with your Volvo XC90 model (2007-2013).
  • Ensure all components listed in the package contents are present and undamaged.
  • Disconnect the vehicle's battery before beginning installation to prevent electrical shorts.

2.2 Installation Overview

While the design aims for easy installation, professional installation is highly recommended due to the electrical nature of the product and potential complexities with vehicle wiring and bumper removal. Incorrect installation can lead to damage to the product or your vehicle's electrical system.

The package includes one pair of LED Daytime Running Lights for the front left and right sides of the vehicle.

Pair of LED DRL and turn signal lights, uninstalled, with a Volvo XC90 in the background.

Figure 1: Uninstalled LED DRL and Turn Signal Light Pair

Close-up of the daytime running lights installed on a car bumper.

Figure 2: Daytime Running Lights installed on a vehicle bumper

3. Operating Instructions

These LED lights provide dual functionality:

  • Daytime Running Light (DRL) Mode: When activated, the lights emit a bright, cool white beam, significantly improving your vehicle's visibility to oncoming traffic during daylight hours. This enhances driving safety by allowing your vehicle to be seen from further distances.
  • Turn Signal Mode: When the turn signal is engaged, the lights switch to a flashing amber (yellow) signal, clearly indicating your intended direction to other drivers.
Image showing both 'Day travel white light' and 'Turning water yellow light' functions.

Figure 3: White DRL (top) and Amber Flashing Turn Signal (bottom)

Image showing the white DRL and yellow turn signal functions side-by-side.

Figure 4: Comparison of White DRL and Yellow Turn Signal functions

4. Maintenance

These LED DRL and Turn Signal lamps are designed for minimal maintenance due to their long lifespan of up to 50,000 hours and waterproof construction.

  • Cleaning: Periodically clean the light surfaces with a soft cloth and mild automotive cleaning solution to remove dirt and debris. Avoid abrasive cleaners or harsh chemicals that could damage the lens or housing.
  • Inspection: Regularly inspect the lights for any signs of damage, loose connections, or condensation. While the reflector is waterproof, extreme conditions or physical damage could compromise its integrity.
  • Replacement: Due to the integrated LED design, individual LED bulbs are not replaceable. If a light unit fails, the entire unit typically needs to be replaced.

5. Troubleshooting

If you experience issues with your LED DRL and Turn Signal lamps, consider the following basic troubleshooting steps:

  • Lights Not Functioning:
    • Check all electrical connections to ensure they are secure and properly seated.
    • Inspect the vehicle's fuse box for any blown fuses related to the DRL or turn signal circuits. Replace if necessary.
    • Ensure the vehicle's ignition is on and the DRL function is enabled (if applicable to your vehicle's settings).
  • Incorrect Color/Flashing:
    • Verify that the wiring for the DRL and turn signal functions is correctly connected according to the installation instructions.
    • If only one side is affected, check the wiring and connections for that specific unit.
  • Condensation Inside Lens:
    • Minor condensation can sometimes occur due to temperature changes and usually dissipates. If persistent or excessive, it may indicate a seal issue. Contact support if it does not clear.

If these steps do not resolve the issue, it is recommended to consult a professional automotive technician or contact customer support for further assistance.

6. Specifications

Feature Specification
Fitment Volvo XC90 (2007-2013)
Light Source LED
Item Type Day Light (DRL), Turn Signal
Special Features High Power, LED DRL
Emitting Color White (DRL), Yellow (Flashing Turn Signal)
Color Temperature White and Yellow
Wattage Approximately 5W
Voltage 12V
Lumens 800lm
Item Weight 0.8 KG (per pair)
Model Name Daytime Running Light
Housing Color Silver
Material ABS
Origin Mainland China
Package Contents 1 Pair * LED Daytime Running Lights (for front L/R)

7. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general advice for automotive lighting includes:

  • Always ensure your vehicle's lights are clean for optimal visibility.
  • Periodically check that both DRLs and turn signals are functioning correctly before driving.
  • If you notice any flickering or inconsistent light output, consult the troubleshooting section or a professional.

8. Warranty and Support

For any questions regarding the product, installation, or performance, please contact the seller directly. The seller provides professional after-sale service and is committed to assisting customers until a satisfactory resolution is found.

Please retain your purchase receipt or order details as proof of purchase for any warranty claims or support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.