1. Introduction
The Signal Fire ZS-20C-V20 is a compact and versatile fiber optic tool kit designed for FTTH (Fiber To The Home) applications. It integrates multiple essential functions including an Optical Power Meter (OPM), Visual Fault Locator (VFL), LED flashlight, and RJ-45 cable test capabilities. This manual provides detailed instructions for the safe and efficient use of your device.
2. Safety Information
- Do not look directly into the VFL output port or any fiber connected to it, as the laser light can cause eye damage.
- Keep the device away from water and high humidity environments.
- Avoid dropping or subjecting the device to strong impacts.
- Use only the specified Type-C cable for charging.
- Ensure connectors are clean before use to prevent inaccurate readings and damage.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
3. Package Contents
Please check the contents of your package. If any items are missing or damaged, contact your supplier.
- ZS-20C-V20 Main Unit (OPM/VFL/LED/Cable Tester) x1
- User Manual x1
- Type-C Charging Cable x1
- Lanyard x1
- Storage Box x1

4. Product Overview
The ZS-20C-V20 features a compact design with a 4.7-inch body, making it highly portable. It includes a clear display for readings and intuitive button controls.

4.1 Key Features
- Optical Power Meter (OPM): High-precision measurements across multiple wavelengths (850/1300/1310/1490/1550/1625nm) with ±0.2dB accuracy.
- Visual Fault Locator (VFL): Stable and strong light source (20mW) for easily penetrating long-distance optical fibers.
- LED Flashlight: Built-in high-brightness LED for working in dark environments.
- RJ-45 Cable Test: Integrated remote cable module for network cable testing.
- Data Storage: 500 loop coverage for storing and reviewing measurement records.
- Wavelength Memory: Remembers the last used wavelength upon power-on.
- Energy Saving: Automatic shutdown after 10 minutes of inactivity.
- User Self-Calibration: Allows for DIY adjustment of offset settings.
- Type-C Interface: Convenient charging.
- Compact Body: 100mm x 59mm x 28mm, weighing only 95g.

5. Setup
5.1 Charging the Device
The ZS-20C-V20 is equipped with a Type-C interface for charging. Connect the provided Type-C cable to the device's USB port and plug the other end into a compatible USB power adapter (not included).
- A full charge takes approximately 3 hours.
- The device offers up to 60 hours of use (OPM only) and 90 days of standby in full power shutdown state.

5.2 Connecting Fiber Optic Cables
The OPM and VFL ports use a 2.5mm universal connector, compatible with FC/SC/ST adapters. Ensure the fiber optic connector is clean before insertion.
- Remove the protective cap from the OPM or VFL port.
- Clean the fiber optic connector end-face using appropriate cleaning tools.
- Carefully insert the fiber optic connector into the corresponding port until it clicks into place.

5.3 Cable Test Module
The device features a built-in remote cable module for RJ-45 cable testing.
- To detach the remote module, press the lock key located on the side of the device and pull the module out.
- To re-attach, align the module with the main unit and push it in until it locks tightly.

6. Operating Instructions
6.1 Power On/Off and Energy Saving
- Power On: Short press the ON/OFF button to turn on the device.
- Auto-Off: The device has an auto-off function and will automatically shut down after 10 minutes of inactivity to conserve battery.
- Disable Auto-Off: If continuous operation is needed, long press the ON/OFF button until a clock icon appears on the screen when turning on the device.
- Power Off: Short press the ON/OFF button to turn off the device.

6.2 Optical Power Meter (OPM) Operation
- Select Wavelength: Short press the Wavelength button to cycle through the available calibrated wavelengths (850/1300/1310/1490/1550/1625nm). The device will remember the last used wavelength.
- Switch Unit/Check Reference: Short press the REF button to switch between dBm, dB, and mW units, or to check the reference (REF) value.
- Set Reference (REF) Value: Long press the REF button to set the current power reading as the reference value.
- Measurement: Connect the fiber optic cable to the OPM port. The device will display the optical power in the selected unit and wavelength.
6.3 Visual Fault Locator (VFL) Operation
- Activate VFL: Short press the VFL button to activate the Visual Fault Locator.
- Switch Output Mode: Short press the VFL button again to cycle through VFL output modes: ON (continuous light), GLINT (flashing light), and OFF.
- Fault Detection: Connect the fiber optic cable to the VFL port. Observe the fiber for red light leakage, which indicates breaks, bends, or poor connections.

6.4 LED Flashlight
The device includes an LED flashlight for convenience in dark environments.
- Turn On/Off: Short press the LED button (flashlight icon) to turn the LED light on or off.

6.5 RJ-45 Cable Test
To test RJ-45 network cables:
- Detach the remote cable module as described in Section 5.3.
- Connect one end of the RJ-45 cable to the main unit's RJ-45 port and the other end to the remote module's RJ-45 port.
- Long press the ON/OFF button to enter/exit cable test mode. The display will show the wiring status.
6.6 Data Storage and Retrieval
The device can store up to 500 measurement records.
- Save Data: Long press the Save button to save the current measurement data.
- View Data: Use the up and down arrow keys to scroll through the stored records.

6.7 User Self-Calibration
The device allows for DIY adjustment of the OPM offset.
- When the device is off, long press the ON/OFF button and the Wavelength button simultaneously to enter the offset setting interface.
- Use the up and down arrow keys to adjust the offset range from -5 to +5 dB.
- Short press the ON/OFF button to confirm the setting.

7. Specifications
| Parameter | Value |
|---|---|
| Model | ZS-20C-V20 |
| PD Type | InGaAs |
| OPM Connector | 2.5mm Universal connector |
| Calibrated Wavelengths | 850/1300/1310/1490/1550/1625nm |
| Display Range | -50~+30dBm |
| Resolution | 0.01dB |
| Accuracy* | ±0.2dB |
| Modulation Test | 270/330/1k/2kHz |
| VFL Connector | 2.5mm Universal connector |
| VFL Power | 20mW |
| LED | Yes |
| RJ-45 Cable Test | Yes |
| Interface | Type-C |
| Battery | Lithium battery |
| Storage Temperature | -20~60°C, < 90%RH |
| Operating Temperature | -10~50°C, < 90%RH |
| Weight | 95g |
| Size | 100mm×59mm×28mm |
*Accuracy measured at 20±3°C, CW, with FC connector, -10dBm.

8. Maintenance
- Cleaning Connectors: Always ensure fiber optic connectors are clean before use. Use lint-free wipes and appropriate fiber optic cleaning solutions.
- Device Cleaning: Wipe the device exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care: For optimal battery life, avoid fully discharging the device frequently. If storing for an extended period, charge the battery to about 50%.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
9. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to a Type-C charger and try again.
- Inaccurate OPM readings: Clean the fiber optic connectors and the OPM port. Ensure the correct wavelength is selected. Perform user self-calibration if necessary.
- VFL light is dim or absent: Check if the VFL is set to ON or GLINT mode. Ensure the fiber is properly connected.
- Cable test failure: Ensure the remote module is securely attached or connected. Check the RJ-45 cable for visible damage.
- Auto-off too quickly: Disable the auto-off function by long pressing the ON/OFF button until the clock icon disappears during power-on.
10. User Tips
- Portability: The ZS-20C-V20 is designed to be mini, portable, and light. Utilize the included lanyard for easy carrying during fieldwork.
- Ergonomics: The device is designed for a comfortable grip, ensuring ease of use during prolonged tasks.

11. Warranty and Support
Signal Fire provides a 5-year warranty for this device. For any technical support, warranty claims, or service inquiries, please contact your authorized dealer or Signal Fire customer service. Professional engineers are available to assist with after-sale service and provide free parts if needed.