Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Amorom 1080P WiFi IP Indoor Camera (Model AM-P1 / JS-R03). This smart surveillance camera offers features such as 1080P Full HD video, night vision, AI motion detection with auto-tracking, two-way audio, and compatibility with Google Assistant and Amazon Alexa. Please read this manual carefully before using the product to ensure proper functionality and safety.

Amorom 1080P WiFi IP Indoor Camera
What's Included
Please check the package contents to ensure all items are present:
- Smart Camera x 1
- Power Adapter (DC5V/1A) x 1
- Wall Screws x 1 Set
- Quick Start Guide x 1
- Mount Base x 1
- USB-C Cable x 1

Package Contents
Product Diagram
Familiarize yourself with the components of your camera:

Amorom Camera Component Diagram
- Indicator Light: Shows camera status.
- Camera Lens: Captures video.
- Microphone: For two-way audio.
- Speaker: For two-way audio.
- Micro SD Card Slot: For local storage (up to 128GB).
- Reset Button: Used for device reset.
- Motorized TILT Motor: Allows vertical camera movement (-10° to 180°).
- Motorized PAN Motor: Allows horizontal camera movement (0° to 360°).
- USB-C Port: For power connection.
Setup Guide
1. Powering the Camera
Connect the camera to a power source using the provided DC5V/1A power adapter and USB-C cable. The power cord length is 1.8m. The indicator light will flash once upon connection, then turn solid blue for approximately 50 seconds as the camera starts up.
Video: Unboxing and Initial Power-up of the Amorom Camera.
2. App Installation & Connection
- Download the official Amorom app from your device's app store (available for Android and iOS).
- Open the app and create an account if you don't have one. Ensure your password is 6-20 characters long and includes at least three of the following: numbers, uppercase letters, lowercase letters, or special symbols.
- Ensure your phone is connected to a 2.4GHz WiFi network. The camera only supports 2.4GHz WiFi.
- In the app, follow the on-screen instructions to add a new device. The camera's indicator light will flash blue during the network configuration process.
- Once connected, you can view the live stream and control the camera remotely.

Amorom App Interface for Device Connection
3. Physical Installation
The camera can be installed in various locations:
- Stand: Place the camera on a flat surface like a table or shelf.
- Wall Mount: Use the provided wall screws and mount base to secure the camera to a wall.
- Ceiling Mount: The camera can also be mounted on the ceiling for an overhead view.
Ensure the camera is placed in a location with good WiFi signal strength for optimal performance.
Operating Instructions
1. Remote Control (Pan/Tilt)
Use the Amorom app to remotely control the camera's movement. The camera can rotate 355° horizontally (Pan) and 130° vertically (Tilt), allowing you to capture a wide viewing angle and see more of every moment.

Remote Pan and Tilt Control via App
2. AI Motion Detection & Auto-Tracking
The camera features a built-in motion detector that pushes alarm messages to your app whenever movement is detected. It can distinguish between humans, cars, pets, and packages. Enable the Intelligent Auto-Tracking function in the app to have the camera automatically follow moving objects within its rotatable angle (V 130°, H 355°).

Motion Detection and App Notifications
Additionally, the camera supports AI Detection of Fire. When flames are detected, an alarm message will be sent to your app. Please note that this is a paid service.

AI Fire Detection Alert
3. Two-Way Audio
With a built-in microphone and speaker, the camera supports two-way audio communication. You can talk to anyone near the camera through the app, which is useful for communicating with family members or warning intruders.

Two-Way Audio Communication
4. Crystal Night Vision
The camera provides clear 1080P images even in low-light or dark conditions, thanks to its 6 Pcs IR Lights. This ensures continuous monitoring of your home day and night.

Clear Night Vision Monitoring
5. Advanced Privacy Mode
Activate Privacy Mode via a one-click control in the app. When enabled, the camera lens will retract to its initial position, stopping video recording and ensuring your privacy. No need to physically unplug the camera.

Activating Privacy Mode
6. Smart Home Integration
The camera is compatible with Google Assistant and Amazon Alexa. You can link the camera to your smart screen devices and control its opening and closing through voice commands. For example, say "Alexa, Show me the Cat Camera!" or "Hey Google, show me baby room!"

Voice Control with Smart Home Platforms
7. Recording & Storage
The camera supports both local storage via a MicroSD card (up to 128GB) and cloud storage. It offers 7x24H video recordings, ensuring you never miss a moment. Tuya cloud storage is available for motion-detected recordings, though this is a paid service after the first month's trial.

Local and Cloud Storage Options
8. Camera Sharing
The Amorom app allows multiple users to view the camera feed simultaneously. You can monitor up to 16 cameras on one screen, making it ideal for larger homes or businesses.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive cleaners.
- Placement: Ensure the camera is placed in a stable location to prevent accidental falls.
- Power: Use only the provided power adapter or a compatible DC5V/1A power supply.
- Software Updates: Regularly check the Amorom app for firmware updates to ensure optimal performance and security.
Troubleshooting
- Q: Why can't I complete account registration, and it always reminds "simple password"?
- A: For security, your password must be 6-20 characters long and contain at least three of the following categories: numbers, uppercase letters, lowercase letters, or special symbols. Please create a more complex password.
- Q: How do I reset the device?
- A: You can reset the device by long-pressing the "reset" button for about 6 seconds until you hear a "Di~" prompt tone.
- Q: How do I add the device to Alexa/Google Assistant?
- A: Follow these steps: Log in to the AMOROM app → Tap the "Me" option → Tap the "Third-Party Voice Service" option → Select the smart device you want to link.
- Q: What should I pay attention to during the configuration process?
- A:
- The camera only works with 2.4GHz WiFi. Please confirm your WiFi router supports 2.4GHz WiFi and connect your phone to the 2.4GHz network.
- Observe the indicator light status:
- Flashes once: When connecting to power supply.
- Solid blue (approx. 50 secs): Camera starting up.
- Flashing blue: Camera is in network configuration process.
Specifications

Amorom Camera Technical Specifications
| Category | Parameter | Value |
|---|---|---|
| Model | Model Number | AM-P1 (JS-R03) |
| Image Sensor | Sensor | CMOS (1/2.9" Color CMOS) |
| Display Resolution | 1080P (1920*1080) | |
| Min. Illumination | 0 Lux (with infrared LED on) | |
| Lens | Lens Type | High definition lens |
| Viewing Angle | 107° (D) / 105° (D) / 75° (H) | |
| Focal Length | 3.6mm | |
| Night Vision | LED | 6pcs 850nm SMT IR LED |
| IR Distance | 5 meters | |
| Video | Day/Night Mode | Auto change with IR-CUT removable |
| Image Compression | H.264 | |
| Image Frame Rate | 15fps (1080P) | |
| Audio | Input/Output | Built-in Mic & Speaker |
| Audio Compression | PCM | |
| Network | WIFI | 802.11b/g/n (2.4GHz) |
| Wireless Security | WEP, WPA, WPA2 | |
| PTZ Movement | Pan/Tilt Range | Pan: 0°-360° (effective 355°), Tilt: -10°-180° (effective 130°) |
| Reset | Reset Button | Available |
| LED | Indicator Light Color | Blue |
| Motion Detection | Motion Detection Range | 5 meters |
| Power Adapter | DC | 5V/1A |
| Storage | Micro SD Card (TF Card) | Maximum support 128GB |
| Cloud | Support cloud storage for TUYA | |
| Physical Properties | Working Temperature | -10°C ~ 60°C |
| Working Humidity | 20% ~ 95% non-condensing | |
| Storage Temperature | -10°C ~ 60°C | |
| Storage Humidity | 20% ~ 95% non-condensing | |
| Mounting | Wall Mount Sets | Yes |
User Tips
- When setting up your account, choose a strong password combining numbers, letters (upper and lower case), and special symbols to enhance security.
- Always ensure your camera is connected to a 2.4GHz WiFi network for stable operation, as it does not support 5GHz WiFi.
- If you experience connection issues, try resetting the device by holding the reset button for 6 seconds.
- For smart home integration, remember to link the camera through the "Third-Party Voice Service" option in the Amorom app's "Me" section.
- Keep an eye on the camera's indicator light during setup; its color and flashing pattern provide important status information.
Warranty and Support
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Amorom customer support. Refer to the Quick Start Guide for contact details or visit the official Amorom website.