1. Introduction
Thank you for choosing the ORIA Digital Wireless Thermometer. This device allows you to monitor indoor temperature and humidity, as well as the temperature and humidity from up to three remote outdoor sensors. This manual provides detailed instructions for setting up, operating, and maintaining your thermometer to ensure accurate and reliable readings.
2. Package Contents
Please check the package contents to ensure all items are present:
- Wireless Thermometer (Main Display Unit) x 1
- Wireless Remote Sensor x 3
- USB Charging Cable for Base Unit x 1
- Operating Instruction Manual x 1

3. Product Overview
The ORIA Digital Wireless Thermometer consists of a main display unit and three remote sensors. The main unit displays indoor conditions and readings from all three remote sensors simultaneously.
3.1 Main Display Unit
The main unit features a large LCD screen with a white backlight for clear readings. It can be placed on a desktop using its retractable stand or mounted on a wall.

Display Elements:
- Sensor 1, Sensor 2, Sensor 3: Displays temperature and humidity from the respective remote sensors.
- Indoor: Displays indoor temperature and humidity.
- Trend Arrow: Indicates whether temperature/humidity is rising, falling, or stable.
- Alert Icon: Appears when temperature/humidity alerts are active or triggered.
- Comfort Indicator: Shows comfort levels (DRY: humidity < 40%, COM: 40% ≤ humidity < 70%, WET: humidity ≥ 70%).
- Touch Backlight: Activates the backlight for 10 seconds (when powered by batteries) or stays on with adjustable brightness (when powered by USB).
Back Panel Buttons:

- ALERT1, ALERT2, ALERT3: Buttons for setting temperature/humidity alerts for each sensor channel.
- MEM: Displays maximum/minimum recorded values.
- °C/°F: Toggles temperature unit between Celsius and Fahrenheit.
- CH: Cycles through sensor channels or initiates pairing.
3.2 Remote Sensors
The three remote sensors are designed for outdoor use with IPX4 splash water protection. Each sensor has a channel switch (1, 2, or 3) to match the main unit's display.

4. Setup Instructions
4.1 Powering the Units
- Main Display Unit:
- Insert 3 x AAA batteries (not included) into the battery compartment on the back of the main unit. Ensure correct polarity.
- Alternatively, connect the main unit to a power source using the provided USB charging cable. When powered by USB, the backlight remains on and has 3 adjustable brightness levels (high-low-off).
- Remote Sensors:
- Open the battery compartment on each remote sensor.
- Insert 2 x AA batteries (not included) into each sensor, observing correct polarity.
- Before closing the compartment, select a unique channel (1, 2, or 3) for each sensor using the small switch inside. This is crucial for the main unit to distinguish between sensors.
4.2 Initial Pairing and Placement
- Place the main display unit and all remote sensors close to each other during initial setup.
- Once batteries are installed in both the main unit and sensors, the main unit will automatically begin searching for sensor signals. This may take a few minutes.
- Ensure each remote sensor is set to a different channel (1, 2, or 3). The main unit will display readings for each active channel.
- Placement Options:
- Main Display Unit: Can be placed on a desktop using its retractable stand or mounted on a wall using the hanging hole. It is designed for indoor use.
- Remote Sensors: Can be placed outdoors (e.g., garden, patio, greenhouse, wine cellar, warehouse) or in different indoor rooms (e.g., bedroom, basement). They can stand, be wall-mounted, or hung. The IPX4 rating provides protection against splash water, making them suitable for outdoor environments.
- The maximum transmission distance between the main unit and remote sensors is 328ft (100 meters) in an open area. Walls and other obstructions may reduce this range.


5. Operating Instructions
5.1 Reading the Display
The LCD screen provides real-time temperature and humidity readings for the indoor environment and up to three remote sensors. Data is updated automatically every 30 seconds for the main unit, and every 31-33 seconds for remote sensors depending on the channel.
5.2 Switching Temperature Units (°C/°F)
Press the "°C/°F" button on the back of the main unit to toggle between Celsius and Fahrenheit. It is recommended to set your preferred unit before installing new batteries, as Celsius is the default.
5.3 Max/Min Record
Press the "MEM" button on the back of the main unit to view the maximum and minimum temperature and humidity values recorded since the last reset. Pressing it again will cycle through Max, Min, and current readings. To clear the Max/Min records, press and hold the "MEM" button for a few seconds while Max/Min values are displayed.
5.4 Temperature/Humidity Alerts
The device supports temperature and humidity alerts for each sensor channel. To set an alert:
- Press the "CH" button to select the desired sensor channel (1, 2, or 3) for which you want to set an alert.
- Press the corresponding "ALERT1", "ALERT2", or "ALERT3" button (depending on the selected channel).
- Use the "MEM" and "°C/°F" buttons to adjust the upper and lower alert thresholds for temperature and humidity.
- Press the "ALERT" button again to confirm and activate the alert. An alert icon will appear on the display.
- When the temperature or humidity exceeds the set thresholds, the alert icon will flash, and an audible alarm may sound.
5.5 Backlight Operation
- Battery Power: Briefly touch the backlight icon on the top front of the main unit to activate the white backlight for 10 seconds.
- USB Power: When powered via the USB cable, the backlight remains continuously on. You can adjust its brightness (high, low, off) by touching the backlight icon.
6. Maintenance
6.1 Cleaning
Wipe the main unit and sensors with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic components or the LCD screen. Ensure no water enters the battery compartments or electronic components.
6.2 Battery Replacement
When the low battery indicator appears on the display, replace the batteries in the respective unit (main unit or sensor). Ensure you use the correct battery type (3x AAA for main unit, 2x AA for each sensor) and observe polarity. Dispose of old batteries responsibly.
6.3 Storage
If the device will not be used for an extended period, remove all batteries from both the main unit and sensors to prevent leakage and damage. Store the device in a cool, dry place away from direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on main unit | Batteries are dead or incorrectly inserted; USB cable not connected or faulty. | Check battery polarity and replace if necessary. Ensure USB cable is securely connected and functional. |
| Remote sensor not displaying readings | Sensor batteries are dead; sensor channel not matched; sensor out of range; interference. | Replace sensor batteries. Ensure sensor channel (1, 2, or 3) matches the main unit's selection. Move sensor closer to the main unit. Avoid placing near large metal objects or electronics that may cause interference. Press the 'CH' button on the main unit to re-scan for sensors. |
| Inaccurate readings | Sensor placed in direct sunlight or near heat/cold sources; poor ventilation. | Relocate sensors to a shaded area or away from extreme temperature sources. Ensure proper airflow around the sensors. Allow time for readings to stabilize after relocation. |
| Backlight not working (battery power) | Low batteries; backlight touch area not activated. | Replace batteries. Ensure you are touching the designated backlight icon area. |
8. Specifications
8.1 Main Display Unit
- Power Supply: 3 x AAA batteries (not included) or USB cable (included)
- Indoor Temperature Range: -9.9°C ~ 50°C (14.2°F ~ 122°F)
- Temperature Accuracy: ±1°C (1.8°F) for 0°C ~ 40°C (32°F ~ 104°F); ±2°C (3.6°F) for other ranges
- Temperature Resolution: 0.1°C (0.1°F)
- Humidity Measuring Range: 20% to 95% Relative Humidity
- Humidity Accuracy: ±5% for 40% to 80% RH; ±8% for 20% to 39% RH and 81% to 95% RH
- Humidity Resolution: 1%
- Data Refresh Rate: Every 30 seconds
- Dimensions: Approximately 4.9 inches (12.5 cm) height x 3.55 inches (9 cm) width
8.2 Wireless Remote Sensors
- Batteries: 2 x AA batteries (not included) per sensor
- Outdoor Temperature Range: -50°C ~ 70°C (-40°F to 158°F)
- Protection Type: IPX4 (Protection against splash water from all directions)
- Transmission Frequency: 433 MHz
- Transmission Range: Max. 328 ft (100 meters) in open area
- Data Refresh Rate: CH1: every 31 seconds; CH2: every 32 seconds; CH3: every 33 seconds


9. User Tips
- This thermometer is suitable for use in all seasons, providing continuous monitoring of your environment.
- The main display unit is designed for indoor use and can be placed in any room where you wish to monitor conditions, such as a bedroom, office, or living area.
- The remote sensors, with their IPX4 rating, are ideal for monitoring outdoor conditions or specific indoor areas like greenhouses, basements, or warehouses.
- For optimal performance, ensure the remote sensors are placed within the specified transmission range of the main unit and away from direct heat sources or extreme cold that could affect accuracy.
10. Warranty and Support
For any questions, technical support, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.
11. Product Video Demonstration
Watch this video for a visual overview of the ORIA Digital Wireless Thermometer, showcasing its display and physical features.